Ok that sounds great !
Allen
That worked great..All are on x10s e...Voice worked ..I may have to rebind but that is to be expected ..
Search found 238 matches
- Fri Mar 20, 2020 11:35 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
- Fri Mar 20, 2020 7:30 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Figured it out..My bad...Now it binds right up to the rx...Fantastic !!!
Thanks
Allen
Thanks
Allen
- Fri Mar 20, 2020 7:12 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I can put it in the x9d and a pro and bind ,no problems ..I can put it in the x10 and nothing ..The rx just stays in bind mode ...I can bind to the dsm as soon as I hit bind ...I can turn on internal module and bind but not from multi ...Bout to pull my hair out . :D . I've tried inverted but nothin...
- Fri Mar 20, 2020 4:40 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Iv'e tried different freq. If I move the freq. off of 0 then it won't go into bind at all. it's just not binding in d16 or d8 ..Tried dsm on a orange rx and it binds right up..I'm sure it is probably something I am doing. I can take the multi out and put it in my x9d+ and it binds right up . I will ...
- Fri Mar 20, 2020 4:11 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
That is what I am thinking...I retried the dsm and it bound right up...I tried the external XJT ,It didn't bind either..when I first go into protocol the freq. for the frsky d16 is set at 6 .It will not do anything there, if I move it to 0 then it will go into bind just won't bind with rx..I will pl...
- Fri Mar 20, 2020 3:29 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Flashed the FW . Tried to bind s8r and had to push bind 3 times and it went into bind (module led flashing fast ) But wouldn't bind ..Checked to make sure com1 wasn't inverted . Tried several times and will not bind ..Tried a dsm receiver..had to push bind 3 times to get it to go into bind mode mode...
- Fri Mar 20, 2020 2:22 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
- Fri Mar 20, 2020 1:08 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I can not bind anything to external module..In multi beside the proto name it says N/A..such as Frsky16 N/A . Module has been upgraded..I have folder Multi.tx on sd card..tried dsm rx and frsky...When I remove the module and turn on and check multiproto the N/a is not there ..When module installed i...
- Thu Mar 19, 2020 11:47 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I was able to flash with eepskye and I also tried it from just the radio , both worked..Version shows today's date ..In external module it now shows multi ..I will try to bind some rx's to see if all is well..
Thanks so much
Allen
Thanks so much
Allen
- Thu Mar 19, 2020 11:30 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I found a eepsky dated July 16 2019 so I updated to that..
- Thu Mar 19, 2020 11:21 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
My eepskye is P423 , Feb 3 2019...I will load new version onto the radio
Thanks
Allen
Thanks
Allen
- Thu Mar 19, 2020 10:00 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Ok I will add the sound files..Yes the throttle was reversed in the hardware.At the time the encoder was bouncing all over the place so I might have done it and not known it..Took me a bit to even get the encoder changed to a 2 because it was going wild ...When I pushed the throttle forward the disp...
- Thu Mar 19, 2020 9:19 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Mike can I go ahead and add my custom sound files or should I wait till next revision so I don't screw something up ? I tend to do that
Thanks
Allen
Thanks
Allen
- Thu Mar 19, 2020 5:47 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Rotary encoder was set to 1..set to 2 , that made it much better .The throttle was reversed in hardware..fixed, I personally don't use model images ..But that is just me.
Thanks
Allen
Thanks
Allen
- Thu Mar 19, 2020 4:37 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
antlerhanger wrote: ↑Thu Mar 19, 2020 4:36 pm Bound to a S8R using internal . Worked fine. Shut radio off to see if it would hold bind .restarted and it worked perfect .. Fantastic !! ..
Thanks
Allen
- Thu Mar 19, 2020 4:36 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Bound to a S8R . Worked fine. Shut radio off to see if it would hold bind .restarted and it worked perfect .. Fantastic !! ..
Thanks
Allen
Thanks
Allen
- Thu Mar 19, 2020 3:45 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Added Radio to sd card ..Flashed with Zadig and companion...Started in the calibration screen calibrated perfect..Changed to Mode 2 AETR...It all saved and shutdown and restarted ..booted up perfect.. All files you mentioned are now on sd card..It was all ok..rotary is touchy ,I'm going to have to g...
- Thu Mar 19, 2020 2:58 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
There is not a "RADIO" directory on the sd card...I will add it then give it another go..
Thanks again
Allen
Thanks again
Allen
- Thu Mar 19, 2020 2:52 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I was able to flash erskytx with Zadig and companion...When I turn on power it just flashes then black screen..If I remove sd card it will go ahead and boot up to erskytx..always to the calibration screen..I can reinsert the sd card and see all the menu's ..I can shut it down then it does the same ...
- Thu Mar 19, 2020 2:44 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I was able to flash erskytx with Zadig and companion...When I turn on power it just flashes then black screen..If I remove sd card it will go ahead and boot up to erskytx..always to the calibration screen..I can reinsert the sd card and see all the menu's ..I can shut it down then it does the same w...
- Thu Mar 19, 2020 12:38 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Thank you so much..I just got home and I am going to flash this version tonight and I will flash the new one when you post it
THANKS MIKE
Allen
THANKS MIKE
Allen
- Wed Mar 18, 2020 3:22 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
If you have openTx flashed, then try starting in bootloader mode (horizontal trims in at power on), connect to your PC, then I think that eepskye should find the radio and let you flash the firmware. Otherwise, if you use companion, you should be able to choose the erskyTx .bin file and flash it us...
- Wed Mar 18, 2020 3:30 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
So I was able to flash OpenTX using companion and Zadig..So that is working..Now I need to find out how to flash a x10s express to erskTX from the radio ...fun problems
Thanks
Allen
Thanks
Allen
- Wed Mar 18, 2020 1:43 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
So I have the sd card ready and I have backed up the radio..Since i can't use EEPskye how do I flash this thing..I can go in and copy the bin file to the radio but Then what ? I just don't want to brick this thing ....
Thanks
Allen
Thanks
Allen
- Tue Mar 17, 2020 10:50 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I downloaded it and I am building a sd card contents for it ..Thanks so much..if I see anything I will let you know
Thank you so much
Allen
Thank you so much
Allen
- Mon Mar 16, 2020 9:48 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I have not messed with it yet ..I do have a openTX sd card but have not loaded it yet ..I can get the bootloader from it tho .I'm not in a hurry so I will wait until you get a version ready ...I know your busy
Thanks for doing this
Allen
Thanks for doing this
Allen
- Mon Mar 16, 2020 4:44 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Mike will the SD card structure be the same ? Same sound files ? Will the bootloader need to be upgraded ?
Thanks
Allen
Thanks
Allen
- Mon Mar 16, 2020 12:39 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
That will work !!! I am looking forward to testing it out .
Thanks so much Mike
Allen
Thanks so much Mike
Allen
- Sun Mar 15, 2020 5:00 pm
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
Thank you so much Mike ..I really do appreciate it .. I am looking forward to getting it loaded up and flying !!
Thanks again
Allen
Thanks again
Allen
- Sat Mar 14, 2020 12:41 am
- Forum: erskyTx (was ersky9x)
- Topic: Frsky x10s express
- Replies: 53
- Views: 32065
Re: Frsky x10s express
I found a bit of time to get started on this, so I can build firmware and flash it to the X10express. Bootloader seems to be working, I can use it over USB to flash new firmware. Sticks, pots and sliders working. Switches working. Trims working. Encoder and buttons working. SD card working. Audio w...