Search found 134 matches

by antlerhanger
Thu Sep 19, 2019 5:08 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Problem with vario
Replies: 5
Views: 122

Re: Problem with vario

I found it in another thread .Second MS5611 must have the MS5611 CE (chip enable) pin connected to VDD. So it gets automatically an I2C address 0x76..I'm just going to run singles as that's all I need .

Thanks again
Allen
by antlerhanger
Thu Sep 19, 2019 4:42 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Problem with vario
Replies: 5
Views: 122

Re: Problem with vario

So I ran 2 different pro mini with each ms5611 showing 0x77 as address.. I then combined the 2 with only one sensor showing connected ( I think I needed to add a wire to one of them) but anyway I then connected back to pro mini and the first one I tried worked fine..Must have been a bad wire somewhe...
by antlerhanger
Thu Sep 19, 2019 12:51 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Problem with vario
Replies: 5
Views: 122

Re: Problem with vario

Thanks so much ! I will download the sketch and see what is happening .

Allen
by antlerhanger
Thu Sep 19, 2019 1:51 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Problem with vario
Replies: 5
Views: 122

Problem with vario

I had a vario built with 2 ms5611 and everything worked great . I decided I would split the ms5611 up and make 2 vario's ..Neither ms5611 would work by themselves . I did go into the config a set them for individual . green light would come on each of them and nothing .I built a different one with a...
by antlerhanger
Sun Sep 15, 2019 8:47 pm
Forum: openTx for FrSky radios
Topic: Accessing SxR Accelerometer and gyro data
Replies: 9
Views: 290

Re: Accessing SxR Accelerometer and gyro data

I am building sensors right now and I always have questions and they always get answered ...100% of the time .

Allen
by antlerhanger
Sat Sep 14, 2019 5:27 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Help with mpu6050 connections
Replies: 2
Views: 151

Re: Help with mpu6050 connections

Yes I did . And I am pretty sure That I can install it without added resistors ...But being pretty sure usually gets me in trouble .

Thanks
Allen
by antlerhanger
Sat Sep 14, 2019 5:08 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Help with mpu6050 connections
Replies: 2
Views: 151

Help with mpu6050 connections

So I have searched and I have read a bunch but I still have a question . I have built 6 vario's with pro mini's 5v 16mhz and ms5611 with gps . I have 5 mpu6050 boards (gy-86 would have been better ). Can and I use these with my setup and if I can what is the correct way to hookup and do I have to us...
by antlerhanger
Wed Sep 11, 2019 7:31 pm
Forum: Hardware
Topic: Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever
Replies: 4
Views: 115

Re: Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

No way to use those together . You can get a multimodule or a dsm2/dsmx compatible rx . I use those orx modules with orange and lemon rx's and they work great

Allen
by antlerhanger
Sun Sep 08, 2019 12:20 pm
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 32780

Re: Serial in eepe/eepskye

Thanks so much . I have FT232RL FTDI USB 3.3V 5.5V to TTL Serial Adapter Module that I use to program the pro mini .
As usual I'm sure I will have other questions..

Thanks again
Allen
by antlerhanger
Sun Sep 08, 2019 2:16 am
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 32780

Re: Serial in eepe/eepskye

Stupid question .but want to make sure . I have built 6 of Mikes SBUS decoders and I used a store bought inverters . They all work fantastic and are hooked up to x8r and s8r receivers . Is this the same decoder that I can use for eepsky to simulate models (I believe they are) just want to make sure ...
by antlerhanger
Sun Aug 18, 2019 12:01 am
Forum: General RC Electronic Projects and Discussion
Topic: Looking for a 12ch receiver.
Replies: 21
Views: 1055

Re: Looking for a 12ch receiver.

The Rmilec works great with the x8r rx . I have not tried it with eepskye . The ones I built I used Mikes sketch I just didn't build the inverter . I bought them for a few dollars ..lazy I guess

Allen
by antlerhanger
Sat Aug 17, 2019 3:38 pm
Forum: General RC Electronic Projects and Discussion
Topic: Looking for a 12ch receiver.
Replies: 21
Views: 1055

Re: Looking for a 12ch receiver.

I use 5 of the RMILEC that you reference and I also built several of Mikes . They both work great . On the ones I built U have to invert the sbus signal so I bought inverters for them . Mike has the inverter diagram with his schematic

Allen
by antlerhanger
Wed Aug 14, 2019 8:23 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Thanks so much . I bet all 3 of my pro's are set to master . Live and learn
Thanks again
Allen
by antlerhanger
Wed Aug 14, 2019 8:05 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Mike is that normal for the Taranis ?
by antlerhanger
Wed Aug 14, 2019 7:47 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Ok It's fixed . In radio setup trainer was set to slave .I moved it to sbus and now the module comes on at powerup . I dont know why but it worked . It does bind and control model just fine

Thanks Mike
Allen
by antlerhanger
Wed Aug 14, 2019 6:39 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Yes I just tried ppm/xjt/multi . No power to the module until I go into protocol and change it to any protocol ,then it comes on .

Allen
by antlerhanger
Wed Aug 14, 2019 4:15 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Mike is the power to the module bay FW controlled or power switch controlled thru the backboard ? (Or both ,maybe) .I'm just thinking if it was power switch it wouldn't work at all . It does turn on with fw once I go in and either turn the external off then back on or change the protocol . Just wond...
by antlerhanger
Tue Aug 13, 2019 11:35 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Yes , changing from multi to xjt or ppm then back to multi then all is fine.

Thanks
Allen
by antlerhanger
Tue Aug 13, 2019 11:06 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

I just tried a Banggood multimodule and it's the same way so it has to be in the FW or the hardware. I thinking it is in the hardware or other people would have the same problem . maybe the switch ?

Thanks
Allen
by antlerhanger
Tue Aug 13, 2019 9:58 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Yes it has Led's ..They stay off until I go into proto and change to any proto then they come on and it works fine until I turn off radio , then I have to do it again . When I turn on the radio I have external on with a proto set , Doesn't make any difference which one . As soon as I either turn ext...
by antlerhanger
Tue Aug 13, 2019 1:04 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

The fw is erskyTx r222 test from July 2019
by antlerhanger
Tue Aug 13, 2019 2:11 am
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Re: Problem with Taranis x9d plus and multi module

Its set to the right proto ,Its just that there is no power to the module until I go into the multi dsmx and change it to anything then back to dsmx then the lights will come on the module and it will bind.. On my pro,s as soon as I turn the radio on it,s ready to bind. I have external on. multi , d...
by antlerhanger
Mon Aug 12, 2019 10:39 pm
Forum: erskyTx (was ersky9x)
Topic: Problem with Taranis x9d plus and multi module
Replies: 19
Views: 1179

Problem with Taranis x9d plus and multi module

So I have irange irx4 plus on my 3 9xr pro's and on my Taranis x9d plus .But on the Taranis when I turn on radio the multi acts like it doesn't get power until I go into the proto menu and change to a different proto , then I can go back to the proto that I want and all is great . The proto is dsm b...
by antlerhanger
Mon Aug 05, 2019 8:47 pm
Forum: openTx
Topic: How do I read single cell voltages in Telemetry screen?
Replies: 10
Views: 592

Re: How do I read single cell voltages in Telemetry screen?

I have several of the Lemon LM0052 , Which is their top of the line telemetry rx .It will only give you total battery and current . If your battery is balanced then you should be able to figure what voltage u want your alarm to go off . Each cell should be close (on a good bat)..My frsky rx will giv...
by antlerhanger
Wed Jul 31, 2019 11:26 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis X9D Plus & SE 2019
Replies: 4
Views: 438

Re: Taranis X9D Plus & SE 2019

I did not know I could add a rotary encoder to my x9d plus and not lose a pot . Mike I read a post you had on another forum . I have encoders on my pro's and always wanted one on my Taranis . That would be the only reason I would buy the new Taranis is for the roller but I can just add encoder to my...
by antlerhanger
Tue Jul 30, 2019 3:09 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis X9D Plus & SE 2019
Replies: 4
Views: 438

Re: Taranis X9D Plus & SE 2019

Frsky needs to send you a radio with all you have done . I can at least send you some beer money while your getting it ported . :D
by antlerhanger
Tue Jul 30, 2019 12:28 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis X9D Plus & SE 2019
Replies: 4
Views: 438

Taranis X9D Plus & SE 2019

Mike will erskyTx be able to run on the new x9d plus 2019 ?

Thanks
Allen
by antlerhanger
Mon Jul 08, 2019 4:38 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4475
Views: 404142

Re: ERSKY9X Coding

LOL on the date ..I'm used to seeing month first :lol: :D ;)
by antlerhanger
Sun Jul 07, 2019 11:15 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4475
Views: 404142

Re: ERSKY9X Coding

Mike I updated my pro's and Taranis . The date when I look at version shows 6/07/2019 instead of 07/07/2019 (just a heads up so there is no confusion ) . All flashed and are working fantastic .
THANK YOU so much for doing this .

Allen

Go to advanced search