Search found 15 matches

by penfred
Tue Oct 23, 2018 4:09 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

The trouble with replace is replaces your other channel ch5 as its in the middle, both ch5 and ch7 use it, flight modes deals with that and so far it is the best option.It might be the best after all.
But it makes you think “maybe if”.

Thanks Fred .
by penfred
Mon Oct 22, 2018 11:30 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

No it makes ch6 go to 200% and that is what I can’t find a way to stop unless you change full servo -100 to +100 to half 0 to +100 then both mixes will work.That is why I thought of trying to disable one switch (mix) when the other was in use.
Fred
by penfred
Mon Oct 22, 2018 1:36 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Yes any thing on that switch is not to activate while the other switch is in use the same as flight modes but by logical switch,just one less thing to worry about
Cheers Fred .
by penfred
Sun Oct 21, 2018 11:41 pm
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Hi all using flight modes does what i want with out a any fuss.Thanks JOAO, and i will use it for the moment but i still fell that the use of this can be replaced by logical switching. I have a F14 tomcat, operating wing with spoilers that only work when the wing is out using logic. So my question i...
by penfred
Sun Oct 21, 2018 11:39 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Thank you joao
It looks like i now have a need to use flight modes, i will try it tomorrow and let you know how i get on.
I think i now have brain FOG. Haha
Regards Fred
by penfred
Sun Oct 21, 2018 10:53 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

I think its quite simple. I am using switches sb and sc ,both use ch 6 so when i am using sb i dont want to be able to use sc so if it is disabled it won’t work and if i am using sc i dont want sb to work.That way I cannot have ch5,ch6and ch7 all working at the same time. Flaps use ch5 and ch6 on SC...
by penfred
Sun Oct 21, 2018 9:43 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Hi Dean I have tried your set up and if i have followed it properly i get the same as if i was using full servo -100 to +100 which gives 200% on CH6 . I'am about to admit defeat that you can't disable an programmed switch,and will have to be on my guard that i don't use both switches at the same tim...
by penfred
Thu Oct 18, 2018 6:51 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

IMG_0780.JPG IMG_0779.JPG Hi Dean. All over school holls its great to see the grand kids and it's good to see them go home. well back to my problem. I have attached photo's of inputs and mixes. what i want to do is operate air brakes and wing flaps on SB switch and wing flaps and center flap on SC....
by penfred
Wed Oct 03, 2018 12:31 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Hi Dean
Sorry for delay school holiday in Melbourne
grandkids have come for a week.
Yes to inputs I5 and I7 max 100
And i only need half the travel so I didn’t bother
With full travel-100 to +100, have since changed to full will post later
Regards Fred
by penfred
Mon Oct 01, 2018 9:04 pm
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Went back over mixes and all Ch6 have to be in add position for it to work on both switches to work. Would still like to disable SC when SB is in use
by penfred
Mon Oct 01, 2018 8:32 pm
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

If i change to replace ch 6. I 7 get to jurky,(cuts out slow u4 d4 )
I changed first line of ch6 I 7 to replace works ok
Now i need to work some way to disable switch SB
by penfred
Mon Oct 01, 2018 11:40 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Hi rdeanchurch
I use the opposite all switches up off, down on
( o,1,2 )just how i like low to hi rates,it would be hard for me to change now. I will
Post a copy of my mixes iuse a horus 10x with 2.2.2
Thanks Fred
by penfred
Mon Oct 01, 2018 11:28 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

Re: logical switch setup for disabling a switch

Hi Tonnie
Yes that’s what i am trying to do,while using sc I can disable sb— and sb down ch 5 but ch6 on sb down increases to 200%
This is what has got me stumped. I am using a horus 10x. With 2.2.2
Fred
by penfred
Fri Sep 28, 2018 7:08 am
Forum: General Information & Rules
Topic: logical switch setup for disabling a switch
Replies: 27
Views: 25255

logical switch setup for disabling a switch

Hi all I have setup a dauntless with dive brakes but i want to disable the flap switch. this is what i have setup. centre flap on ch5 , wing flaps on ch6 working off SC with .two rates. Air brakes on ch7 with wing flaps ch6 working off SB with two rates all is working as it should but i would like t...

Go to advanced search