Search found 46 matches
- Mon Oct 08, 2018 2:50 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR PRO - better gimbals
- Replies: 100
- Views: 168812
Re: 9XR PRO - better gimbals
All wires must be black-yellow-red https://uploads.tapatalk-cdn.com/20181008/81cc8dc35096a13da12012e69d1aabf4.jpg That’s original wiring above. I have wired new gimbals as following: Old yellow -> new yellow Old red -> new red Old brown -> new black So your suggestion would be : Yellow > black Red ...
- Sun Sep 30, 2018 6:32 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR PRO - better gimbals
- Replies: 100
- Views: 168812
Re: 9XR PRO - better gimbals
I believe they are. I upgraded my Taranis-x9d (using erSky9x firmware) and it made a real difference. Feels like I have better control over the standard Taranis Gimbals when flying. Bob B. Thanks bob, I decided to go one step at a time. Taranis gimbals seems to be a lot easier to fit so I’ll try th...
- Sun Sep 30, 2018 6:29 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR PRO - better gimbals
- Replies: 100
- Views: 168812
Re: 9XR PRO - better gimbals
Hello there So I started replacing my gimbals for the ones from FrSky Taranis, but I can’t get the radio to calibrate properly. One direction is fine (say top and left) but the other one (bottom and right) doesn’t go all the way. Even after many attempts of analog calibration. Any tips ? Enviado do ...
- Thu Aug 30, 2018 3:20 pm
- Forum: ersky9xr
- Topic: Turnigy 9xr pro constant beeping
- Replies: 9
- Views: 8914
Re: Turnigy 9xr pro constant beeping
Really ? Why ?jhsa wrote:DO NOT turn any RF module ON without antenna. You will damage it completely or partially..
Enviado do meu iPhone usando Tapatalk
- Tue Aug 28, 2018 7:52 am
- Forum: General Information & Rules
- Topic: TR battery
- Replies: 3
- Views: 10710
Re: TR battery
I’m doing exactly like this:
https://www.thingiverse.com/thing:258146
Enviado do meu iPhone usando Tapatalk
https://www.thingiverse.com/thing:258146
Enviado do meu iPhone usando Tapatalk
- Tue Aug 28, 2018 7:45 am
- Forum: ersky9xr
- Topic: Turnigy 9xr pro constant beeping
- Replies: 9
- Views: 8914
Re: Turnigy 9xr pro constant beeping
My XJT module will beep out loud if I turn the radio on with no antena attached.
At first I thought it was something in the radio. But eventually I figured that out.
Any chance that’s your case ?
Enviado do meu iPhone usando Tapatalk
At first I thought it was something in the radio. But eventually I figured that out.
Any chance that’s your case ?
Enviado do meu iPhone usando Tapatalk
- Thu Aug 23, 2018 11:02 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 53849
Re: Problem with forum. Repeatedly "signed off"
I use Google Chrome Version 68.0.3440.106 (Official Build) (64-bit) and Firefox Quantum 61.0.2 (32bit) and I have not had this problem of being signed out randomly. I hope it is fixed soon for you guys ! Still happened to me yesterday or the day before on a Mac machine with Safari. I believe it’s s...
- Mon Aug 20, 2018 1:09 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR PRO - better gimbals
- Replies: 100
- Views: 168812
Re: 9XR PRO - better gimbals
i'm going for the gimbals mod on my 9XR PRO and considering two options: https://hobbyking.com/en_us/frsky-m9-r-hall-sensor-gimbal-for-x9d-x9d-plus-transmitter-black-edition.html ($23) https://hobbyking.com/en_us/frsky-replacement-gimbal-for-taranis-transmitter.html ($14) are the M9 worth the premiu...
- Sat Aug 18, 2018 11:37 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Wierd issue with right gimbal
- Replies: 82
- Views: 49855
Wierd issue with right gimbal
Ok I fixed my right gimbal by pulling it off the radio and pushing a little bit the elevator pot away from the gimbal. Then I pushed it back in. Recalibrate and works like a charm now.
Enviado do meu iPhone usando Tapatalk
Enviado do meu iPhone usando Tapatalk
- Fri Aug 17, 2018 11:03 am
- Forum: ersky9xr
- Topic: RX Failsafe
- Replies: 10
- Views: 9586
RX Failsafe
He explained it just above. I’m pretty sure he did but my extremely limited experience in the matter didn’t allow me to understand. Let me put in points the information I got from his last post: 1) “send now” will send failsafe values to RX once 2) failsafe values stored in RX are lost after a powe...
- Fri Aug 17, 2018 10:16 am
- Forum: ersky9xr
- Topic: RX Failsafe
- Replies: 10
- Views: 9586
Re: RX Failsafe
When “repeat send” is enabled the radio will keep sending failsafe values even during normal flight ? What’s the purpose?
Enviado do meu iPhone usando Tapatalk
Enviado do meu iPhone usando Tapatalk
- Fri Aug 17, 2018 10:10 am
- Forum: Turnigy 9XR PRO radio
- Topic: Questions about RSSI
- Replies: 7
- Views: 6630
Re: Questions about RSSI
He is asking if it is normal the RSSI dropping to zero when the RX and Radio are too close.. That should be normal as the RX is probably being swamped.. Signal is too strong. I have never seen it happening in range test mode though. :) João I can reproduce it consistently both in test range mode an...
- Fri Aug 17, 2018 10:08 am
- Forum: Turnigy 9XR PRO radio
- Topic: Questions about RSSI
- Replies: 7
- Views: 6630
Re: Questions about RSSI
That is normal. The range check reduces the power to simulate a long distance. Move the radio 30 metres away with the model about 1 metre above the ground Check the RSSI value, a safe reading would be 45+. Got a 64 in plain sight and 45 behind a wall. Guess it’s good then. Enviado do meu iPhone usa...
- Thu Aug 16, 2018 11:48 pm
- Forum: ersky9xr
- Topic: RX Failsafe
- Replies: 10
- Views: 9586
Re: RX Failsafe
Ok I got it. If anyone else is interested: 1) turn on RX 2) turn on TX 3) go to model setup -> protocol -> external -> long press failsafe 4) set mode to custom 5) set desired channel values or “use actual” 6) press send now (option will blink) 7) press the physical button in RX (the one used for bi...
- Thu Aug 16, 2018 7:34 pm
- Forum: ersky9xr
- Topic: RX Failsafe
- Replies: 10
- Views: 9586
RX Failsafe
Hello
Where can I find documentation for failsafe menu under protocol (r221) for XJT ?
Didn’t find anything in the document “9XR PRO ERSKY9x explained”.
Thanks
Enviado do meu iPhone usando Tapatalk
Where can I find documentation for failsafe menu under protocol (r221) for XJT ?
Didn’t find anything in the document “9XR PRO ERSKY9x explained”.
Thanks
Enviado do meu iPhone usando Tapatalk
- Thu Aug 16, 2018 7:19 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Questions about RSSI
- Replies: 7
- Views: 6630
Questions about RSSI
R221, menu protocol option “range test” gives me a number for RSSI. When close to RX (one or two feet away) I get a value of 90 but when too close (a couple inches) RSSI drops immediately to ZERO. Is this normal ? I know my critical alert is set to 42. Is a value of 90 when one feet away from RX goo...
- Wed Aug 15, 2018 2:29 am
- Forum: ersky9xr
- Topic: debug voice alert files
- Replies: 4
- Views: 4767
Re: debug voice alert files
By the way Mike, I have noticed the voice pack for the latest firmware isn’t using the voice index as file names anymore. Can I still rely in the old voice index table (I.e. gear up = 76) ?
Enviado do meu iPhone usando Tapatalk
Enviado do meu iPhone usando Tapatalk
- Wed Aug 15, 2018 1:44 am
- Forum: ersky9xr
- Topic: Automatically generating voice alerts in Mac OS X
- Replies: 1
- Views: 3116
Automatically generating voice alerts in Mac OS X
Inspired by this topic http://openrcforums.com/forum/viewtopic.php?f=64&t=6871 I decided to create a bash script that makes use of Mac OS X text to speech capabilities to automatically generate voice alert files. I am basically using 3 tools to generate the WAV file required by ersky9xr r221: sa...
- Wed Aug 15, 2018 1:27 am
- Forum: ersky9xr
- Topic: debug voice alert files
- Replies: 4
- Views: 4767
Re: debug voice alert files
Thanks it’s working now.
Enviado do meu iPhone usando Tapatalk
Enviado do meu iPhone usando Tapatalk
- Tue Aug 14, 2018 11:14 pm
- Forum: ersky9xr
- Topic: debug voice alert files
- Replies: 4
- Views: 4767
debug voice alert files
hello i have generated the attached WAV files exactly the same way but 9XR Pro (r221) refuses to play one of them. learjet.wav is working, the other one isn't. learjet.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 16000 Hz File: learjet.wav File type ID: WAVE Num Tracks: 1 ...
- Mon Aug 13, 2018 9:07 pm
- Forum: ersky9xr
- Topic: Assign ID to exponential travel profiles
- Replies: 9
- Views: 7159
Re: Assign ID to exponential travel profiles
Try: DrSw1 set as !IDv (!ID2) DrSw2 set as !ID^ (!ID1) In my opinion it will work better. I have just tried in Eepskye :) By the way, triple rates are explained on the Er9x manual, page 42 and 43. João Thanks. It’s clear now. For anyone interested that’s the relevant part: Hi is DrSw1 OFF (DrSw2 do...
- Mon Aug 13, 2018 9:50 am
- Forum: ersky9xr
- Topic: Assign ID to exponential travel profiles
- Replies: 9
- Views: 7159
Re: Assign ID to exponential travel profiles
Thank you very much. Works like a charmMikeB wrote:DrSw1 needs to be !ID^ (that is NOT ID^). When editing the switch value go DOWN to get the NOT switch values.
Mike
![Smile :)](./images/smilies/icon_e_smile.gif)
Enviado do meu iPhone usando Tapatalk
- Mon Aug 13, 2018 1:31 am
- Forum: ersky9xr
- Topic: Channel reversed ?
- Replies: 0
- Views: 2752
Channel reversed ?
Moderator please delete this topic
- Mon Aug 13, 2018 1:18 am
- Forum: ersky9xr
- Topic: Assign ID to exponential travel profiles
- Replies: 9
- Views: 7159
Re: Assign ID to exponential travel profiles
Set DrSw1 to !ID^ (!ID0) and DrSw2 to IDv (ID2). With the swith up you get high rate, in the centre you get mid rate and down gives you low rate. Mike That’s the first thing I tried mike, but unfortunately it didn’t work (or I’m doing it wrong). Doing as you said I get MID at the top and HIGH at mi...
- Sun Aug 12, 2018 1:39 am
- Forum: ersky9xr
- Topic: Assign ID to exponential travel profiles
- Replies: 9
- Views: 7159
Re: Assign ID to exponential travel profiles
You mean something like a triple rate but with Expo only? João? Nope. I know I can set set 3 profiles for EXPO for each channel. So I can have a LOW EXPO, MID EXPO and HIGH EXPO for each channel. I can then assign TWO buttons to switch between those 3 profiles. If I use two normal switches they giv...
- Sun Aug 12, 2018 12:33 am
- Forum: ersky9xr
- Topic: Trim problem
- Replies: 21
- Views: 13662
Re: Trim problem
That’s interesting. We would call that a “Friday’s radio” here, since people are eager to get back home for the weekend and prone to make mistakes.jhsa wrote:Probably Monday radios.
Enviado do meu iPhone usando Tapatalk
- Sun Aug 12, 2018 12:29 am
- Forum: ersky9xr
- Topic: Assign ID to exponential travel profiles
- Replies: 9
- Views: 7159
Assign ID to exponential travel profiles
Hello
Is there a way to assign the 3 position switch “ID” to exponential travel profiles in the following way:
ID- > LOW
ID > MID
ID+ > HIGH
?
Enviado do meu iPhone usando Tapatalk
Is there a way to assign the 3 position switch “ID” to exponential travel profiles in the following way:
ID- > LOW
ID > MID
ID+ > HIGH
?
Enviado do meu iPhone usando Tapatalk
- Sun Aug 12, 2018 12:17 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 53849
Re: Problem with forum. Repeatedly "signed off"
Nope. I run Linux.bob195558 wrote:I am running Win7 64bit desktop PC, could the random Signed Offs be only with Win10 desktop PCs ?
Enviado do meu iPhone usando Tapatalk
- Sat Aug 11, 2018 1:40 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 53849
Re: Problem with forum. Repeatedly "signed off"
bob195558 wrote:Could this be a EU area problem, as I am in the USA and seem to not be having this problem.
I’m in South America and that happens all the time to me when reading the forum trough the web. Never had any issue with Tapatalk though.
Enviado do meu iPhone usando Tapatalk
- Sat Aug 11, 2018 1:33 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Flash lights on release of servo - Bait Boat Help
- Replies: 73
- Views: 56081
Re: Flash lights on release of servo - Bait Boat Help
Sounds like a good job for an Arduino
Enviado do meu iPhone usando Tapatalk
Enviado do meu iPhone usando Tapatalk