Search found 18 matches

by vtgrx
Wed Dec 05, 2018 7:39 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro trim buttons repair
Replies: 3
Views: 467

Re: 9XR Pro trim buttons repair

rsilk49 wrote:
Sun Dec 02, 2018 8:38 am
Set them on the small pins and carefully replace the faceplate which will hold them in place.
Look at the horizontal trim buttons, they fit the same.
I lost both the pins. Looks like I need to prepare them manually somehow.
by vtgrx
Mon Nov 19, 2018 9:03 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Wiring Info Q&A
Replies: 76
Views: 40535

Re: 9XR Pro Wiring Info Q&A

MikeB wrote:
Sun Nov 18, 2018 11:12 pm
Both the rotary encoder connector (main board) and the PPM2 connector (RF board) are not connected to anything on the radio as shipped. Both are for users to use if they want to add "extras".

Mike
Thank you so much, Mike. That was exactly the answer I was looking for.
by vtgrx
Sun Nov 18, 2018 11:03 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Wiring Info Q&A
Replies: 76
Views: 40535

Re: 9XR Pro Wiring Info Q&A

Sorry, I don't understand your post. What are you trying to do?? João Can I get a picture of the motherboard and RF board of the TX in its default condition with no mods or hacks? In my TX, the rotary encoder port shown in the above image was not connected to any wires. Also, the PPM encoder in the...
by vtgrx
Sun Nov 18, 2018 8:06 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro trim buttons repair
Replies: 3
Views: 467

9XR Pro trim buttons repair

I opened up my 9XR Pro and somehow the 2 vertical trim buttons popped out. I cannot figure out how to reinstall them. Can anyone send a picture, video or somehow help me out with it?
by vtgrx
Sun Nov 18, 2018 7:52 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Wiring Info Q&A
Replies: 76
Views: 40535

Re: 9XR Pro Wiring Info Q&A

Do I leave the PPM2 output in the RF board and rotary encoder in the main board disconnected?
by vtgrx
Thu Oct 11, 2018 12:28 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Re: Turnigy 9XR pro shows blank blue bootloader screen

jhsa wrote:
Tue Oct 09, 2018 10:11 am
Did you find an exact replacement?

João
Well, I had to remove the switch's entire shelling and then something like this popped out. I was able to easily find an exact spare for this in my local electronic store.

Image
by vtgrx
Tue Oct 09, 2018 6:13 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro not being detected in any simulator
Replies: 9
Views: 955

Re: 9XR Pro not being detected in any simulator

My friend has a X9D plus and it works with this 3rd party dongle with Phoenix. I am using ERSKY9X rev 221.
by vtgrx
Tue Oct 09, 2018 6:07 am
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Re: Turnigy 9XR pro shows blank blue bootloader screen

search youtube, I think there are videos showing how to open the radio. Mine is nice and closed now :) Basically, I think you will have to remove the RF module board to access the power switch. I also do not remember very well. Last time I have opened it was quite a while ago.. :) Have a look insid...
by vtgrx
Mon Oct 08, 2018 4:24 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro not being detected in any simulator
Replies: 9
Views: 955

9XR Pro not being detected in any simulator

I connected my 9XR Pro to Phoenix and Realflight via JR port using this cable https://www.aliexpress.com/item/1pcs-4IN1-USB-Flight-Simulator-Computer-Flight-Simulator-For-G4-FMS-XTR-AEROFLY-SU27-KT-Model/32805074139.html?spm=a2g0s.9042311.0.0.34a04c4d4wgkBl However, my TX is not being detected in ei...
by vtgrx
Tue Sep 25, 2018 3:26 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Re: Turnigy 9XR pro shows blank blue bootloader screen

Hey, if it is possible for you, can you make a video on how to open the transmitter. I cannot get the power switch to open after removing the board. Thanks!
by vtgrx
Wed Jul 18, 2018 5:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Re: Turnigy 9XR pro shows blank blue bootloader screen

jhsa wrote:
Tue Jul 17, 2018 4:01 pm
After reassembling. Didn't need to desolder anything. Just took the switch apart.

João
It was kept open for quite a few days. It had gathered a lot of dust over it. So, dust is the result of the broken switch?
by vtgrx
Tue Jul 17, 2018 12:35 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Re: Turnigy 9XR pro shows blank blue bootloader screen

jhsa wrote:
Tue Jul 17, 2018 12:23 pm
The power switch is broken..
I also had that problem. Couldn't find replacements. I had to take the switch apart and clean the contacts with alcohol and a tooth brush.. Then had to assemble it again..

João
Did it work after resoldering?
by vtgrx
Tue Jul 17, 2018 6:37 am
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 11
Views: 1690

Turnigy 9XR pro shows blank blue bootloader screen

When I switch my 9XR Pro on, it shows SHUTTING DOWN followed by POWER OFF and the message stays on screen until I switch it off. If I move the power button a bit, it brings me back to the normal screen. I tried reflashing but when I hold the trim buttons inwards followed by the power button, I get a...
by vtgrx
Fri Jun 01, 2018 9:39 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 21
Views: 53994

Re: 9XR Pro Manuals

That was a calibration issue. I was only setting the midpoints and not moving the sticks after that. Problem solved. Thank you everyone for your help.
by vtgrx
Fri Jun 01, 2018 12:13 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 21
Views: 53994

Re: 9XR Pro Manuals

jhsa wrote:
Thu May 31, 2018 2:56 pm
Nope, video can't be seen on my computer or smartphone.. :(

What is the title of the video so we can search?

João
I am sorry. The video was set as private. Should work now.
by vtgrx
Thu May 31, 2018 2:24 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 21
Views: 53994

Re: 9XR Pro Manuals

Video seems to be unavailable João Works okay for me. Try this http://redirect.viglink.com/?format=go&jsonp=vglnk_152777662997114&key=76563c4d2e1e0340ce7f6d67b106dab9&libId=jhumqi1s01002ns2000DAqb3q2tms&loc=http%3A%2F%2Fopenrcforums.com%2Fforum%2Fviewtopic.php%3Ff%3D122%26t%3D5575&v=1&out=https%3A%...
by vtgrx
Thu May 31, 2018 10:27 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 21
Views: 53994

Re: 9XR Pro Manuals

ER9X Calibration issues

I am facing this issue with ER9X. OpenTX works just fine. How do I calibrate it properly?
by vtgrx
Sat May 19, 2018 2:48 pm
Forum: ersky9xr
Topic: Unable to flash back to er9x for 9XR Pro
Replies: 1
Views: 534

Unable to flash back to er9x for 9XR Pro

Hey, I recently got a 9XR Pro with OpenTX installed. I wish to flash back to er9x but when I loaded the firmware on SD Card and tried flashing in the bootloader menu by holding down the menu key, I see nothing happens on the screen. I tried flashing back using eepskye but when I run this program, it...

Go to advanced search