openrcforums

Apparently there is a problem with open tx 2.3.5
https://github.com/betaflight/betafligh ... issues/305

Quick update it seems on page 13 of the tx I have two information screens enabled.....Screen 1 is for Scripts and Screen 2 was for RSSI and battery voltage......If I disable screen 2 then Lua scripts work ? Any thoughts apart from only having Screen 1 enabled ?

Yes I did update the lau script.....Thanks for the reply though

Hi Just updated my Taranis radio and bootloader X9D+ SE on Open Tx to the latest 2.3.5 version { although no luac box to tick anymore ?) also updated the SD card and Lua scripts to 1.4.1 but now I can't change my PID values on the tx everytime I press page on the tx it shows the rssi value pressing ...

I've found the cause.....It was the way I was trying to load the settings through the Taranis......I switched it on then plugged it into the pc, then on the Taranis I had a choice of joystick or Sd card I selected the Sd card then tried to flash through companion which is why I got the error code......

Can someone just confirm my experience in saving a model is correct please ? If I select back up model on the Taranis it saves it on the model file on the Sd card.......If I then plug the Taranis into the pc and copy the model from the Taranis model file onto my pc then load that model on my pc comp...

Problem has been resolved I got my young nephew to take a look at my pc and although I did remove the Taranis bootloader usb I didn't do it the right way so it v wasn't quite completely removed as I had thought he removed it correctly which meant when I replugged in my Taranis to my pc both drives w...

So set by step Screenshots but still doesn't show Taranis ?

Thanks jtaylor I had already read elsewhere about deleting the device as you have mentioned and did try that but no luck it still won't show the Taranis.....I'll try it again with screenshots to show you what I'm seeing then hopefully you may see something I don't ?

HI ive been using my Taranis on my Pc with no problems when I plug the tx into the pc I could see both taranis drive and the sd card......however now I cant ? The pc makes the connection noise but no drives appear ? When I go into the pc's device manager and check the usb connection I can see the Ta...

If I select noheli in the settings and it was successful in loading to the tx I would not have the heli page which I still have and cannot remove it as either loading through the Sd card or through companion (which I get the error code) prove the heli page has not been removed.

I have sent the settings directly to the Sd card firmware file as mentioned before (and shortened the file to under 8 letters) it doesn't change the page from 13 to 12 as it should ?

Everything you see is what I see the file name is showing screenshot 2,3,4 and 5......

So I'll run through this again with screenshots 1.open companion 2.2.1 2.click on settings tick 'noheli' which should then only give me 12 pages on the tx menu 3.click on download on companion......it downloads to a folder in pc......then asks if you want to download to tx to which I say yes then th...

Yes either downloading to sd card then writing that to the tx although it shows it loading still shows the thirteen pages when worth no heli it should be twelve.

The file is downloaded to pc when it's selected to write to TX it starts to load then at the end the error message appears as the screen shots above ?

Kilrah can you explain how to download new settings then if they are different to the way I've mentioned above ?

The date I assume it's the release date of that firmware ?

Ok so I've loaded a few screenshots to explain what I'm doing........Firstly load companion on pc then click settings tick or untick the files i want or don't want then download to pc which also asks then if I want to load to the tx..... to which I say yes it then nearly loads as you watch the progr...

Rcdiy I have done that and it does load but like I said as an example I have heli ticked on the settings so have 13 pages in the Taranis if I then untick heli and download the software to the Taranis through companion I get that message at the end and I still have 13 pages.......If I load it through...

Both have been updated to 2.2.1 when I bought the tx brand new last week it had 2.1.6 on both the tx and bootloader so it did let me update it but since then I just get the message if I try to adjust the version I now have.

Just as an example if I have the heli screen loaded so have 13 pages.......So if I load the download screen up again and this time untick the heli box then download to the pc the open tx companion then asks if hi want to flash to the tx which I agree to but as it finishes flashing across to the tx I...

If you mean can I bring up the tx menu through companion then yes.......Also the tx shows up on my pc along with the Sd card.

Hi when I try to write new firmware to my Taranis x9d se it loads it then I get this message (see photo)
Any way to fix this or is the radio faulty ?

Thanks Kilrah I worked that out by going through the sound files until I found the open tx which you are right is now Hello

 I've watch the you tube videos but I just can't removed the start up voice or change it ? I have the amber sound back installed and when I go into the system folder of the sound pack and find 'tada_opentx' then remove it when I start up the tx again "welcome to open tx" starts up but how ...

I knew it wouldn't be long before I had to ask a question about the Taranis set up. I've been using Spektrum tx's for over 20 years so bear with me here please as the Taranis is going to be a steep learning curve from what I'm used to...... After watching many YouTube videos about setting up the Tar...