openrcforums

Pmullen's post referred to model match. So no you don't have to rebind if your receivers all work in the same mode. If they don't, you must either switch the transmission mode manually with the switch or rebind (as explained in the module's manual). Sent via mobile So if I have 2 models running on ...

Scott Page wrote:

Var wrote:Does anyone know if this module keeps a model memory? Or do I have to rebind every time I switch to a different model?

Modules don't keep the memory of the receiver, the receiver keeps the memory of the module.

Ahh..thanks..Makes much more sense.

Does anyone know if this module keeps a model memory? Or do I have to rebind every time I switch to a different model?

ShowMaster wrote:Maybe he meant Frsky?
SM


Sent from my iPod touch using Tapatalk.

Based on previous posts I'd say not likely.

cr4wler wrote:thanks for enlightening me guys!!

i just put a flysky module on my cart.

=)

Where did you order from?

The question is, will it work ? I'm not brave enough to buy one and try, but there are many others who will. I'm still waiting for real world reviews. If it sucks it sucks. If it works I'll use it.

To address the guys talking about how the internal antenna connector was a stupid idea.. I don't mind using a stock antenna. DSMX and ACCST with stock antennas should be plenty robust for LOS flying. It's really the product implementation/launch that sucked. How can you invent a new form factor and ...

So the new 9XR specs say it has an internal antenna. What does that mean for people using a plug-in module where the antenna screws directly into the back like this one ? http://www.hobbyking.com/hobbyking/store/__24656__OrangeRX_DSMX_DSM2_2_4Ghz_Transmitter_Module_JR_Turnigy_compatible_.html Is it ...

Cool on the settings thing. Not sure about the first comment. Maybe you're right and the problem will come back over time. Or I could try and remove the baudrate setting again and see if it breaks. I'll report back when I have time to try that out.

Just a little informational post.This might serve as a resource to people who are having an Eeprom Error message after AVRDUDE fails writing I bought a smartieparts programmer (v2.3) and an LED backlight and installed it in my Turnigy 9x. I downloaded Eepe using the MAC OSX installer (http://eepe.go...