openrcforums

Hi, I try with : - FIRST_BARO_SENSOR_USE set on NO_BARO - #define DISPLAY_ACC_OFFSET set as comment (in config_advanced) - DEBUG being set as comment (in config_advanced). but the sensor is not discovered by my Taranis QX7. By replacing NO_BARO by MS5611, the ACC numbers are displayed on the QX7. Th...

Hi mstrens, Thank you for your answer. MPU6050 works well with MPU6050_DMP6 and MPUTeapot. This is the result of the test : openXsensor starting.. milli=0 freeRam=1017 vario setting up.. begin I2C scan last I2C scan adr: 68 vario is up.. FRSky Output Module: TX Pin=4 Sport protocol= 1 End of general...

Hi, Sorry to have given up so long. Months ago we discussed of an issue I got with a GPS and GY-521 installation : freezing of the MPU-6050 during setup. I rebuild a new project with a new Arduino mini-pro and one GY-521 alone. And get ..... the same issue ! openXsensor starting.. milli=0 freeRam=12...

Sorry, transfer this to new thread

Thank you Carbo, When i tried with a S6R neither my sensor nor the LUA-script worked. When i changed the sensor ID from 0x1B (28) to 0x67 (8) everything worked. In oXs_config_advanced.h the sensor ID is correct. #define DATA_ID_ACC 0x67 // 7 used for Acc X, Y, Z The question is why initialization pr...

Hi, Thank you for all this excellent work. I am interested in reading airplane attitude angles from the telemetry between my Taranis QX7 and S8R receiver. Gyro angles are measured by a GY-521 (MPU6050). I add a NEO-6M GPS sensor. And I upload openXsensor on an Arduino Pro Mini. SPort - , GPS Groung,...