Thanks for this very helpful clarification Mike.
Kit
Search found 48 matches
- Thu Nov 04, 2021 9:18 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
- Tue Nov 02, 2021 7:42 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, that worked just fine and is much quicker than the 3 step process! Thanks! Just to help my understanding, on my 9XR PRO plugging a 3.5 mm jack into the trainer socket does power up the radio. I thought I needed to do that every time I flashed a module using the Update SPORT command so I could ...
- Mon Nov 01, 2021 10:19 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, it occurred to me that maybe on the 9XR Pro, the powering off with the 3.5mm jack plug in the trainer socket trick might be needed to power up the R9M at the correct time when using the FlashElrs_atmel app?
This does not seem possible at present when running the app.
Kit
This does not seem possible at present when running the app.
Kit
- Mon Nov 01, 2021 9:38 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, thanks for your help. The time FlashElrs_atmel app worked for me I had taken a R9M with the stock Frsky firmware, used Update SPORT to flash the elrs bootloader (.frk) and then used FlashElrs_atmel to flash the elrs firmware. Attempting apply this elrs update, I tried all the combinations arou...
- Sun Oct 31, 2021 11:05 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, just in case you have any suggestions for diagnosing this, today I tried using the FlashElrs_atmel app (for just the 2nd time) on my 9XR Pro to upgrade my RM9 to ELRS-1.2.0. After briefing displaying "power on delay" on the screen, there is a delay of a few seconds while it displays ...
- Mon Jun 28, 2021 9:46 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Brilliant,that "just worked"!
My unmodified R9M 2019 (the one without all the dangly wires) is working fine and is now transmitting within the legal 915-928 Mhz band for New Zealand.
Thanks Mike!
My unmodified R9M 2019 (the one without all the dangly wires) is working fine and is now transmitting within the legal 915-928 Mhz band for New Zealand.
Thanks Mike!
- Sun Jun 27, 2021 11:27 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, to be more specific, prior to saying that pafleraf responded "MPM", after AlessandroAU said: "@pafleraf did the implementation, I think it's the same as the frsky upload method". So I presume pafleraf means it is like the multi-protocol module method, which presumably is wh...
- Sun Jun 27, 2021 11:08 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, pafleraf, who implemented that in OpenTx replied "he is 100% correct, as usual", so apparently your deductions are correct!
- Sun Jun 27, 2021 10:02 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Thanks Mike, I've asked the devs to confirm that on Discord: https://discord.com/channels/5963500221 ... 7636976692
- Sun Jun 27, 2021 4:48 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Hi Mike, I tried using the Maintenance mode Update Multi to flash my unmodified R9M 2019 (after successfully flashing the r9m_elrs_bl.frk bootloader). I tried all the options (inverted/non-inverted, COM1, COM2) to flash the firmware.elrs file (actually named as firmware.bin) without success. Do you ...
- Sat Jun 26, 2021 11:38 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
So to run an app would you go in to maintenance mode, choose "Update firmware" and select an app from the SD card?
- Sat Jun 26, 2021 10:05 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Thanks Mike, I have only ever used Ersky, but apparently on OpenTX 2.3.12 or later they use a function in the Tools menu called "Flash external ELRS": https://github.com/ExpressLRS/ExpressLRS/wiki/Flashing-R9M-TX I would be interested to know more about "apps". Are they part of t...
- Fri Jun 25, 2021 11:02 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Mike, the one remaining thing that makes ELRS hard to use with ErskyTx is that you need OpenTx to flash R9M modules with the ELRS firmware unless you solder on wires (to small,fragile pads) so you can use a STLink to program it. Flashing ELRS to the R9M is a 2 step process, first flashing a new boot...
- Wed Jun 23, 2021 9:09 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
I've just posted a new test version for both the 'PRO and the X9E. This should sync. faster at low packet rates. Mike Mike, On my 'PRO I now get: ersky9x-B5r223 22.06.2021 20:03:11 200 Hz 0:200 0x1388 +/- < 0x9 100 Hz 0:100 0x2710 +/- < 0x9 50 Hz 0:50 0x4E20 counting down for ~18s from R9M boot tun...
- Tue Jun 22, 2021 9:10 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
The 25Hz is too slow at present. My timer uses a 0.5uS resolution and I alternate between 2.5mS (5000 period) and "the rest". In the case of 25Hz "the rest" is 37.5mS giving a period of 75000, which is too large for a 16 bit timer, so I default to 4mS (250Hz). I'll see if I can ...
- Tue Jun 22, 2021 9:04 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Not sure about 200Hz, I'll look at the code again. The 25Hz is too slow at present. My timer uses a 0.5uS resolution and I alternate between 2.5mS (5000 period) and "the rest". In the case of 25Hz "the rest" is 37.5mS giving a period of 75000, which is too large for a 16 bit tim...
- Tue Jun 22, 2021 8:55 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
I had to do a fiddle for 200Hz that resulted in a 100uS error every second. This causes the offset error. I've done a change that should fix that, so a new test version is posted. How long does it take for 25Hz and 50Hz to lock in? Is it too long? Mike Thanks Mike, this fixes the 200 Hz. ersky9x-B5...
- Mon Jun 21, 2021 9:05 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Thanks Mike, that version looks pretty good: ersky9x-B5r223 20.06.2021 20:34:28 200 Hz 0:200 0x1388 ~0x50 to ~0x60 100 Hz 0:100 0x2710 +/- < 0xf 50 Hz 0:50 0x4E20 counting down then eventually +/- < 0xf 25 Hz 0:50 0x9C40 +/- counting down then eventually +/- < 0xf I'm not sure why the 200 Hz would h...
- Sun Jun 20, 2021 12:20 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Thanks Mike, My results with the latest 'PRO version are: ersky9x-B5r223 20.06.2021 10:24:23 200 Hz 0:395 1388 +/- < 0xf 100 Hz 0:100 0x2710 +/- < 0xf 50 Hz 0:50 0x4E20 counting down then eventually +/- < 0xf 25 Hz 0:250 0x9C40 +/- < 0xf So 100 Hz and 50 Hz look good but perhaps 25 Hz is locking to ...
- Sun Jun 20, 2021 12:02 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Hi Mike, I would think, given how old some of the Txs and modules out there are, it might be common to have frequency offsets of >100 parts per million so a phase locked loop with a little integral gain might help, and is probably what you have implemented already. I use software phase locked loops ...
- Sat Jun 19, 2021 11:02 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Hi Mike, On my 9XR Pro the latest version gives: ersky9x-B5r223 19.06.2021 16:41:00 200 Hz 0:395 1388 +/- ~0xf 100 Hz 0:100 0x2710 +/- ~0xf 50 Hz 0:50 0x4E20 counting from ~0x1000 multiple times then eventually +/- ~0xf 25 Hz 0:250 0x9C40 +/- ~0xf So 100 Hz and 50 Hz look good, although 50 Hz seemed...
- Sat Jun 19, 2021 11:58 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Thanks Mike. The results on my 9XR Pro with R9M and ELRS RC8 were: Version Ersky9x-B5r223 200 Hz 0:200 0x1388 +/- ~0x50 100 Hz 0:167 0x2710 counting rapidly up to ~0x1500 and going -ve 50 Hz 0:167 0x4E20 counting rapidly up to ~0x1500 and going -ve 25 Hz 0:167 0x9C40 counting rapidly up to ~0x1500 a...
- Sat Jun 19, 2021 8:37 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
It certainly used to be the case that changing the RF packet rate caused ELRS to have to reconnect, due to the SX12xx modulation parameters having to change. They may have made the link faster at synching up again since I last checked. I would be interested to try this latest version of ErskyTx on m...
- Sun Jun 13, 2021 11:33 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
I'm assuming that the ELRS module is sending the required rate in the CRSFshot sync packet, so I would need to look at that value and adjust the rate at which I send packets accordingly. If I send packet more often than every 4mS, I'm not sure what the timing will then be for telemetry packets comi...
- Sun Jun 13, 2021 3:21 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
Hi Mike, On my 9xr-Pro running ersky9x-B4r223 with a R9M flashed to ELRS RC8 I get the same as lim3, i.e., A 200 Hz ELRS air rate shows 0:200 for the packet rate while the 25, 50 and 100 Hz rates all show around 166-167 packets/s. Before I flashed the ersky9xr_rom.zip 26-Apr-2021 21:27 "Fix bug...
- Sun Apr 25, 2021 11:36 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1348253
Re: ERSKYTx (was ersky9x) Questions
I could also test it on my 9XR Pro + R9M.
- Thu Nov 19, 2020 8:04 am
- Forum: erskyTx (was ersky9x)
- Topic: Script Language
- Replies: 342
- Views: 254653
Re: Script Language
I have added a new ELRS2.bas script that seems to work ok with the master-dev version of ELRS, i.e. the "new lua" version, here: https://github.com/spinorkit/ExpressLRS ... /ELRS2.bas
- Sun Nov 15, 2020 10:14 am
- Forum: erskyTx (was ersky9x)
- Topic: Script Language
- Replies: 342
- Views: 254653
Re: Script Language
I have put a first cut of a basic script to set the parameters for ELRS (for the R9M on a 9xr pro) here:
https://github.com/spinorkit/ExpressLRS ... x/ELRS.bas
https://github.com/spinorkit/ExpressLRS ... x/ELRS.bas
- Sun Nov 15, 2020 12:12 am
- Forum: erskyTx (was ersky9x)
- Topic: Script Language
- Replies: 342
- Views: 254653
Re: Script Language
Mike. so sorry to waste your time. The ersky9xr_rom223A6 is now working. I thought I had flashed the r version of that but maybe it was the s version both times. Would you expect the s version to have that reboot behaviour on the 'PRO? BTW, how do I tell if my 9xr pro has the small rom? Try and read...
- Sat Nov 14, 2020 11:58 pm
- Forum: erskyTx (was ersky9x)
- Topic: Script Language
- Replies: 342
- Views: 254653
Re: Script Language
I tried ersky9xs_rom223A2 and it has the reboot problem. I took out the r9m module (with all my wires connected to it) and the problem still occurs.