openrcforums

OK, I think I have this all fixed now. The problem was the SD card was being initialised before the wait with "STARTING" displayed. If you release the power button, then press it again, the card thinks it is initialised, but the firmware tries to initialise it again, and fails, so the fir...

Merry Xmas and Happy New Year everyone!!

I've fixed the power cycling problem, however, it was caused by the SD card getting into a state where it doesn't respond. So far, I haven't found a way to get it back without a power off and back on. Mike. Thanks for the update Mike, I wonder if this is caused by a specific SD card or is this a ge...

The power problem may take a few days to sort. I've got one change that improves things, but I can still get the problem. It is almost certainly a watchdog reset, possibly, from one report above, due to waiting for the SD card that isn't initialising under this condition. Mike. Yes definitely relat...

Templates are working for me on the QX7, but (currently) you have to use the MENU button (centre button on the left) to apply them. You get a haptic buzz when a template is actioned. I can create the power cycling problem, so I should be able to find the fix. Mike. Good to hear, looking forward to ...

Thanks Mike! You guys are really awesome. Do you have a donation page?

Thanks for the info João. What happened to the templates? I can see them and I chose one and press enter long it seems to apply but when I go back to the mixer screen it's blank? Also I didn't see an SD card browser? Am I missing anything? Is this a planned feature? Finally any ideas on that restart...

So this still happens even after formatting the SD card again with fat 32 and 32kb allocations. It seems that the trigger is not pressing the on button long enough. So basically if you accidentally abort the startup sequence by letting go of the on button too early, then try again to start it, it wi...

Hi all, so I am happy to report that I managed to successfully install ERSKY9x on my QX7S :) big thanks to Mike and Interestingfellow for all your help. I have to say I find it way easier to use than OpenTX. However I have encountered a strange issue relating to the SD card. First it seems to work f...

I don't understand one thing, is updating the bootloader a must? When I asked Mike for instructions on installing ErSky9x on Qx7S he didnt mention anything about updating the bootloader? I wish someone would actually write a step by step instructions on how to do the entire process end to end. Some...

The SD card itself should work without any special changes. It is recommended the SD card is formatted wit FAT32, and with a 32K cluster size. There is a specific SD card formatter available, search for "SDFormatter.exe". THe main item you need on the SD card is the voice pack, download i...

I don't understand one thing, is updating the bootloader a must? When I asked Mike for instructions on installing ErSky9x on Qx7S he didnt mention anything about updating the bootloader? I wish someone would actually write a step by step instructions on how to do the entire process end to end.

You need ersky9x for the QX7. Go here: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676 , download "ersky9xProvR221f7.zip", extract "x7_rom.bin from the .zip file and flash that to the radio. You also need to run eepskye on your PC (not eepe). If you have eepe installed alr...

I have loaded latest pre-release version of ER9X on my QX7. Everything seems to be there except the Protocols Page is missing stuff including Bind and Range Check menus. Should I just re-flash to fix the problem? Hi guys, I recently acquired a Qx7S and would like to use ER9X instead of openTX. Coul...