Search found 38 matches

by EdwardMcRichy
Wed Feb 20, 2019 2:40 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Re: Frsky R9M

MikeB wrote:
Wed Feb 20, 2019 11:26 am
The QX7 switches power to the module at the correct time, it is only on the 'PRO you would need to use this method.

Mike
Gotcha, thought I did this on my old 9xr pro but guess not.
by EdwardMcRichy
Tue Feb 19, 2019 7:10 pm
Forum: ersky9xr
Topic: A way of installing ersky by SD card?
Replies: 8
Views: 899

Re: A way of installing ersky by SD card?

Thanks to all who have chimed in. Never realized there was a Class10 microSD full of folders in the slot.... What a hack :oops: ersky9x r221 is installed and I am pleasantly surprised to see auto switch sourcing.:-) Nice new splash screen. I felt like such a traitor for wanting to go to OpenTX anyw...
by EdwardMcRichy
Tue Feb 19, 2019 7:08 pm
Forum: ersky9xr
Topic: A way of installing ersky by SD card?
Replies: 8
Views: 899

Re: A way of installing ersky by SD card?

Is there some trick to installing eepesky? I had a complete failure during the install. Something about missing .dll Why does it have to be so difficult? This is not the first PC with Win7 64 that I have had an issue with the eepe So is there a way of updating ersky9x via SD card ? My 9XR Pro is ru...
by EdwardMcRichy
Tue Feb 19, 2019 7:02 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Re: Frsky R9M

The 9XR-PRO is able to update modules and receivers/SPort devices, from the SD card, using the module bay. Be aware, for receivers/SPort devices, the pins are in the wrong order and you need to use a cable that swaps power and ground. In any case, it is necessary to get to the "Finding Device" stag...
by EdwardMcRichy
Fri Jan 04, 2019 3:16 pm
Forum: ersky9xr
Topic: R9M and R9mm issues
Replies: 5
Views: 489

Re: R9M and R9mm issues

The first thing I would do is update the firmware on the module and the receiver, then report back.
by EdwardMcRichy
Sun Dec 16, 2018 10:30 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx Test Versions
Replies: 102
Views: 101726

Re: Ersky9x Test Versions

Quick question, I'm using the R9M and one of it's previous updates made a change to the 1w power mode so it essentially starts at 100mw and changes power up to 1w as the RSSI signal gets weaker. Is this update reflected in the latest test versions of firmware? I was looking at the test versions page...
by EdwardMcRichy
Wed Sep 05, 2018 6:35 pm
Forum: ersky9xr
Topic: Turnigy 9xr pro constant beeping
Replies: 9
Views: 1141

Re: Turnigy 9xr pro constant beeping

are you sure it's not the module? If it is that means the module is bad. Happened to me twice.
by EdwardMcRichy
Thu Aug 23, 2018 10:57 pm
Forum: ersky9xr
Topic: Newb Help with Scripts and S6r
Replies: 12
Views: 1044

Re: Newb Help with Scripts and S6r

Awesome. yeah this software definitely has a learning curve. I am getting RSSI: feeds back!! in the mid 90's at about 5ft away and something else SWR at about 16 or so. I am still not getting a reading back from the S6R. so when i go through the script to the SXR menu, i am still not getting any in...
by EdwardMcRichy
Sun Jul 29, 2018 4:44 pm
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 11
Views: 2110

Re: Switch arm with DJI Naza M lite

Change the logic switch to "v<val" Reinhard My brother a I are at our wits end. We can't figure out the switch arming in Ersky9x. We've looked at the links supplied in this thread and still can't figure it out. Below are some photos of what the settings were. We can't get the quad to arm by switch....
by EdwardMcRichy
Mon Jul 02, 2018 3:13 am
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 11
Views: 2110

Re: Switch arm with DJI Naza M lite

Thanks for your input, we will try these out and post results back here when done. Ok We tried the safety switch out but are unsure of how exactly to do it. I've attached some photos of the screens for in the mixer, logical switch and safety switch. I read through the er9x manual and this is the be...
by EdwardMcRichy
Sat Jun 23, 2018 1:04 pm
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 11
Views: 2110

Re: Switch arm with DJI Naza M lite

Thanks for your input, we will try these out and post results back here when done.
by EdwardMcRichy
Fri Jun 22, 2018 10:32 pm
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 11
Views: 2110

Switch arm with DJI Naza M lite

Hi all, My brother has a DJI Naza M Lite, running the latest version of Ersky9x on 9xrPro. He wants to arm the quadcopter using a switch instead of the stick arming. Tried to follow this video but it was for OpenTx: https://www.youtube.com/watch?v=fxIDxb-aDvk Tried as best as we could to do the set ...
by EdwardMcRichy
Mon Apr 02, 2018 6:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Keep breaking XJT modules
Replies: 10
Views: 1826

Re: Keep breaking XJT modules

Thanks everyone for your input. I've never removed the module with the radio powered on however I do understand that with the module being loose and turning it's self off and on can cause problems with the module and with that being said maybe that is the problem. I'll also look into pushing the pin...
by EdwardMcRichy
Sun Apr 01, 2018 10:38 pm
Forum: Turnigy 9XR PRO radio
Topic: Keep breaking XJT modules
Replies: 10
Views: 1826

Re: Keep breaking XJT modules

I also put electrical tape around the module, however this is the least of my problems. XJT modules keep breaking and don't know why. At the risk of this happening again I just bought a QX7. I'll run Ersky9xr on it but just don't want to keep buying a new module every year.
by EdwardMcRichy
Sat Mar 31, 2018 6:49 pm
Forum: Turnigy 9XR PRO radio
Topic: Keep breaking XJT modules
Replies: 10
Views: 1826

Keep breaking XJT modules

Hey guys, before I go shell out $104 on a QX 7, thought I would try to see what if anything can be done. I have been using the Frsky XJT module in my radio now for almost two years, in that time I've gone through two modules, for some reason they keep breaking. This time the module is contantly beep...
by EdwardMcRichy
Fri Mar 09, 2018 5:29 pm
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

Ok, it appears I'm a dummy. I'm pretty sure that I was able to get GPS on my radio once I set the RSSI channel to the correct aux channel in betaflight. I am doing to good ol' loop back method to get RSSI on my OSD, using channel 6 (aux 2). Turns out I had the RSSI channel set to aux 6 in Betaflight...
by EdwardMcRichy
Sun Feb 25, 2018 4:56 pm
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

Regarding the "Script Error", please check in the Telemetry|Custom menu that the custom display is set to "Values" and not "Script". I looked at the raw log files, the only GPS data in them is the GPS Heading, no Lat or Long data, so it seems the GPS Lat and Long are not being sent by the receiver/...
by EdwardMcRichy
Sun Feb 25, 2018 2:07 pm
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

The raw log file is empty, and also doesn't have a date on it. Is your real time clock (RTC) running? Has the battery that keeps it running gone flat? This is important as the signal that controls whether telemetry data is inverted or not is controlled by an output from the RTC chip. When you selec...
by EdwardMcRichy
Sun Feb 25, 2018 1:04 am
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

With everything running, go to the Telemetry/Logging menu. At the extreme right of the display, there is a tick shown beside any values that are being received. LAT and LONG are near the end of the items. See if either has a tick (not the one in te box that selects them for logging). Also, you coul...
by EdwardMcRichy
Wed Feb 21, 2018 3:34 pm
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

No, if GPS data is sent over the SPort, then it should appear on the GPS display screen, and be available to log. I would guess that the GPS data is not being sent from Betaflight. Mike Mike I inquired over on the Betaflight thread on RC Groups and was informed that indeed Betaflight does send GPS ...
by EdwardMcRichy
Sun Feb 18, 2018 1:03 am
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

Re: How to receive GPS on 9xrPro Ersky9xr 221 g7

I don't know Betaflight, but it seems you don't have any SPort telemetry working. SWR comes from the Tx module and RSSI comes from the Rx. Mike Just realized I didn't save in the betaflight configurator so I do have S port telemetry working now. I see FasV, amps and all sorts of other info. Just no...
by EdwardMcRichy
Sat Feb 17, 2018 10:47 pm
Forum: ersky9xr
Topic: How to receive GPS on 9xrPro Ersky9xr 221 g7
Replies: 11
Views: 1597

How to receive GPS on 9xrPro Ersky9xr 221 g7

Hey experts, I've looked around this forum and can't find instructions on how to receive GPS on the radio. I have an Omnibus F4, Frsky X4R-SB with smart port connected to soft serial. Running betaflight 3.2.5. I have GPS connected to UART 1, I can see GPS coordinates on the OSD through my goggles. I...
by EdwardMcRichy
Sun Feb 11, 2018 8:01 pm
Forum: ersky9xr
Topic: CRSF protocol for TBS Crossfire?
Replies: 189
Views: 30537

Re: CRSF protocol for TBS Crossfire?

Hi Mike, UPDATED: F8 appears to work correctly with items I was initially concerned about FASV (voltage), RSSI and TSSI. I see Amps working also (great). Is it possible to add LQ also? I see people using this now as a means of needing to return. I was also wondering if we could get mah used after L...
by EdwardMcRichy
Sun Jan 28, 2018 5:48 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Re: Frsky R9M

MikeB wrote:
Sun Jan 28, 2018 3:32 pm
r221g5 is posted, but you need to go down a few posts in the test versions thread to find it.

Mike
Thank you
by EdwardMcRichy
Sun Jan 28, 2018 2:22 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Re: Frsky R9M

MikeB wrote:
Sat Jan 27, 2018 2:58 pm
The nex test version (r221g5) will have support for the R9M included.

Mike
That is awesome, i was just going to ask if there were plans to support. Not a programmer so I'm useless in this matter.
by EdwardMcRichy
Fri Jan 26, 2018 5:39 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Re: Frsky R9M

Nope OpenTX supports them fully since 2.2.1. It was jsut a bit of a nightmare since FrSky's doc was pretty bad, AND what we had done initially changed later with a module firmware update. There are EU and US versions, which both have different power setting availability and telemetry availability t...
by EdwardMcRichy
Fri Jan 19, 2018 3:15 am
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 10893

Frsky R9M

Has anybody tried to use the new FrSky R9M with the 9xr Pro and ErSky9x firmware? My brother just purchased the module and receiver so hoping it works out of the box with the firmware.
by EdwardMcRichy
Sun Dec 10, 2017 2:54 pm
Forum: Turnigy 9XR PRO radio
Topic: Wierd issue with right gimbal
Replies: 82
Views: 10888

Re: Wierd issue with right gimbal

So i just updated my blog about this mod to the 9xr pro, hopefully this helps some one out. http://thehabitualcrasher.blogspot.com/ ... t.html?m=1
by EdwardMcRichy
Sun Dec 10, 2017 12:35 am
Forum: Turnigy 9XR PRO radio
Topic: Wierd issue with right gimbal
Replies: 82
Views: 10888

Re: Wierd issue with right gimbal

Good you now have it all working. Mike. Just flew 4 packs, the gimbals feel great though I'm not used to the way they feel so it's like learning all over again. Great radio, awesome firmware..... Also blew the R9 resistor somehow when I had the radio open so had to bridge that before I went out to ...
by EdwardMcRichy
Sat Dec 09, 2017 9:39 pm
Forum: Turnigy 9XR PRO radio
Topic: Wierd issue with right gimbal
Replies: 82
Views: 10888

Re: Wierd issue with right gimbal

Ok got everything to work. Mike you were correct it was wire ordering so I took some time to swap wires around. So for anybody who purchase the PR10 Taranis Gimbals this was my wiring order. With the radio open and looking at the back of the gimbals and working left to right. Pitch and Roll (Right s...

Go to advanced search