Search found 63 matches

by hackerjoe
Sat Aug 04, 2018 2:54 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

No, you don't see the voice files.. You can send voice files to the card though.. But please note that if they have the same file names as another files on the SD Card, they will replace them. João ok got it Joao Thank you for all the help, I appreciate it. I should have done all 3 radios over last...
by hackerjoe
Fri Aug 03, 2018 10:44 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok so I made up 2 quick models.
I booted the radio in Bootloader mode, the serial adapter is connected to laptop and using eepe 421 version I can see the models I just created.

I don't see any sounds however.
Is there something else I need to do Joao?
Thanks
by hackerjoe
Fri Aug 03, 2018 2:37 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Cool I don't think I saw that one.
Thank you again,
I will try it tomorrow its almost bedtime for me.

Does it matter what version of eepe you use ? I think I am using revision 421
by hackerjoe
Fri Aug 03, 2018 12:30 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok, it seems there is a bug in Er9x, at least for the m2561. The latest test version has a bootloader. If I put the radio in Bootloader mode, it won't stay, it falls back to the firmware after a few seconds.. This prevents communication between eepe and the voice module.. If i am quick enough I can...
by hackerjoe
Thu Aug 02, 2018 10:19 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Follow the schematic on the first post. make sure you didn't forget to connect a wire from arduino D9 to the other board "Backlight Signal".. Did you check the "Radio Setup / Display" menu? Please confirm that the option "Light OFF after" is set to something other than "OFF" João Ok I found the iss...
by hackerjoe
Thu Aug 02, 2018 9:39 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Check your soldering.. :) Also, don't forget to check those options on the radio :) João Ok Joao the Splashscreen was off, I must have never put it on and didn't realize the sound relied on it. In still have no backlight. I jumped the ground wire to a straight ground and it comes on? How does the A...
by hackerjoe
Thu Aug 02, 2018 1:23 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

But is it the same transistor or an equivalent? Different transistors could have a different pinout. João I used BC546B BC546 Transistor NPN 65V 0.1A I am sure they are installed the same way on all 3 boards. The first 2 are working without issues, maybe the 3rd one is bad or I blew it? I will chec...
by hackerjoe
Thu Aug 02, 2018 1:03 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

jhsa wrote:
Thu Aug 02, 2018 12:53 pm
One thing to check is that you didn't connect the transistor wrong, for example, reversed..

João
I connected it as per diagram, I looked at it last night.
The flat side of the transistor is facing the voltage regulator.
I'll have double check it when I get home later.
Thanks,

Joao
by hackerjoe
Thu Aug 02, 2018 12:27 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Please go to "Radio Setup / General" and make sure that the splash screen option is ticked. if this option is not ON, the welcome message will not be played. For the backlight, go to " Radio setup / Display", and set "Light Off After" to about 10 or 20 seconds.. see if you have your backlight back ...
by hackerjoe
Thu Aug 02, 2018 11:23 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

jhsa wrote:
Thu Aug 02, 2018 7:47 am
Do you get a splash screen when you turn the radio ON?

João
Joao I don't get the Splash Screen come to think of it.
Also I have no backlight.
Oh I tried getting into the SD card while in Bootloader mode but the computer never connects the radio screen stays with the Bootloader on the screen
by hackerjoe
Thu Aug 02, 2018 1:06 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Yeah I'm puzzled. I loaded to bootloader file then the AMOD file as per 1st post but it didn't make a difference. I get EasyStar file announced and can get sound with switch like gear up and gear down but no welcome to ER9x :( I pulled the SD card out and verified it works in another setup with no p...
by hackerjoe
Tue Jul 31, 2018 1:52 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok I built a 3rd module for my Turnigy 9X - I'm running ER9X Ver820. I could have sworn I built it and programmed it exactly as I did the other previous 2 but for some reason I am not getting the Welcome to ER9X when you turn on the transmitter and I have no back light. I get the second half of the ...
by hackerjoe
Sat Jul 28, 2018 6:06 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I figured I would post this If anyone is looking to flash your Arduino Pro Mini before completing the board build.
You'll need to use your USBASP and follow the diagram to wire it up.
There are a few application you can use like Bitburner, AVRDUDESS and I think Xloader will work.
by hackerjoe
Wed Jul 11, 2018 5:00 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: arduino pro mini 168

sorry to interrupt, is the arduino pro mini 168 compatible for arduvoice? just want to know as i have few pieces with me and i want to utilize them. thanks (", These worked for me - Arduino Pro mini Oh and don't forget these as well - SD card reader - SD card reader Programmer - Programmer
by hackerjoe
Thu Jun 14, 2018 7:02 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I can't see why it wouldn't work, but I could be wrong of course.. João mmm...ok. I put it out there but so far had a lot of "looks" but no comment. Maybe Mike could throw some light on it if he get a free moment. Cheers Jorgo bluejets what exactly are you looking to accomplish? I just built Joao's...
by hackerjoe
Tue Apr 03, 2018 12:30 pm
Forum: er9x
Topic: Voice Packs for Er9x
Replies: 8
Views: 7706

Re: Voice Packs for Er9x

Hi Joao,

thank you
by hackerjoe
Mon Apr 02, 2018 6:52 pm
Forum: er9x
Topic: Voice Packs for Er9x
Replies: 8
Views: 7706

Re: Voice Packs for Er9x

Hi Joao,

My question is about the startup voice on radio power on.
Where is the " Welcome to ER9X Have a good flight " stored?
I know there is an option to change what plays after that - I think the default file is set to file number 260.

Thank you,
Joe
by hackerjoe
Mon Apr 02, 2018 1:54 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok, I have the second ArduVoice board installed and working in my TH9X Atmega64 chip. I have to look at the volume control as it is not going up or down but it is working. Just a note: I have found that using the 2 board design fits nicer in the radio. I have one more Arduvoice board to install. It'...
by hackerjoe
Thu Mar 29, 2018 1:15 am
Forum: er9x
Topic: I just want to verify this is the correct version for a 9X w/ Atmega64
Replies: 2
Views: 519

Re: I just want to verify this is the correct version for a 9X w/ Atmega64

Hi Mike,

Thank you
I'm working on the Telemetry Mod now using a DJT module.
I plan on installing the ArduVoice board as well.
I figured it was done like that too save flash. I think I recall reading about that some where and was just making sure I loaded the correct version.
by hackerjoe
Wed Mar 28, 2018 7:04 pm
Forum: er9x
Topic: Will this Module work in a 9X with the new Test FW?
Replies: 3
Views: 480

Re: Will this Module work in a 9X with the new Test FW?

Ok gotcha,

I thought it would be nicer to use a big boy remote on my indoor toys lol :shock: :roll: :D

Thank you
by hackerjoe
Wed Mar 28, 2018 2:00 pm
Forum: er9x
Topic: Will this Module work in a 9X with the new Test FW?
Replies: 3
Views: 480

Will this Module work in a 9X with the new Test FW?

I'm curious if this module will work in a 9X with the new Multiprotocol ER9X test version?
Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Taranis Q X7 Transmitter
Multiprotocol Module.jpg
by hackerjoe
Wed Mar 28, 2018 12:09 pm
Forum: er9x
Topic: I just want to verify this is the correct version for a 9X w/ Atmega64
Replies: 2
Views: 519

I just want to verify this is the correct version for a 9X w/ Atmega64

Is er9x-frsky-sv the correct version for a 9X Atmega64 radio with Serial Voice and Telemetry mod? I'm guessing it is from the frsky = Tel mod and sv = serial voice. I just want to be sure. I flashed my 9X Atmega64 radio with er9x-frsky-sv and when going into Hardware option there is nowhere to turn ...
by hackerjoe
Tue Mar 27, 2018 11:52 am
Forum: PROGRAMMERS
Topic: Yet another Chinese knockoff USBasp question
Replies: 1
Views: 1394

Re: Yet another Chinese knockoff USBasp question

Ok I tried using another USBasp & Arduino in ISP mode but nothing has been able to see the Chinese programmer no matter how the pins were. :shock: I don't even see any J2 jumper on it either so I am going to call it wasted time and money. :roll: Windows see it but I can't use it to program anything ...
by hackerjoe
Mon Mar 26, 2018 11:10 pm
Forum: PROGRAMMERS
Topic: Yet another Chinese knockoff USBasp question
Replies: 1
Views: 1394

Yet another Chinese knockoff USBasp question

USBasp1.jpg I have been reading some of the post and thought maybe I could fix my inop Chinese knockoff programmer. I have 2 different programmers ( one ordered from Hobby King & the other ordered from Banggood ) that work out of the box. They aren't Chinese knockoffs. Anyway I got home from work a...
by hackerjoe
Mon Mar 26, 2018 1:32 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I like the model backup feature as well. I tried it on the radio I just finished and it worked flawlessly. I will have to take a photo of where I mounted the FTDI adapter and post it later on. I am going to mount it in the same place on my 2 other radios. 2 more switches hmmm - I don't need them at ...
by hackerjoe
Mon Mar 26, 2018 1:30 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

ArduVoice.jpg
I made another sound card its basically 2 but on one board.
I attached a photo of it before wiring it.
Thank you for making sound happen Joao & Mike
by hackerjoe
Fri Mar 23, 2018 5:38 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi all, Ok I ripped everything apart last night after noticing no change on the Arduino led when trying to play a file. :shock: :? :x I may have reversed pins 27 & 28 to the Arduino not sure and also possibly the trims inputs. :oops: The other thing I noticed is that the Aileron switch didn't change...
by hackerjoe
Thu Mar 22, 2018 10:26 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

OK everything is installed and the sound board powers up. I removed OEM beeper and transistor. I get a beep when powering up from ArduVoice. I enabled M'sound serial in hardware mode and changed mode sound to Megasound. How do I setup what file plays for whatever switch is toggled ? Or is that the p...
by hackerjoe
Thu Mar 22, 2018 1:31 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

OK its the pins for the CPU. Thank you I wanted to make sure.
PIN 27 & 28 are ElevTrimUp & ElevTrimDn :D
by hackerjoe
Thu Mar 22, 2018 10:34 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53757

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Joao,
Is the photo for the trim connections correct? It looks like 28 and 29 ?

Go to advanced search