Search found 12 matches

by Prowler901
Mon Jan 08, 2018 3:36 am
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Thanks again, Joao! It works perfectly! :)

Many thanks to you and Mike for the work you do on this forum. :)

Todd
by Prowler901
Sun Jan 07, 2018 7:37 pm
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Hi Joao, I think you just nailed it. I didn't look far enough down the list. I had the "arduino mini" selected. I looked further and saw the "arduino pro or pro mini" and selected that. So, I went through the process again and it appears that it has uploaded the sketch. At least ...
by Prowler901
Sun Jan 07, 2018 4:22 pm
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Yes, everything is connected/soldered with pins just as you showed in you picture. And, those are the results I get. So, I'm missing something else. Thanks, Todd Edit: I've added some photos for clarity. I don't think I have any cold solder joints. They all look pretty good to me. And, the green LED...
by Prowler901
Sun Jan 07, 2018 3:56 am
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Well, I'm not having any luck programming the mini. And, I haven't had much help from the Arduino board. I plug everything in and get a red LED on the Mini along with a flashing green LED. I press the reset button and press upload in the Arduino IDE program (desktop version) it compiles the code and...
by Prowler901
Thu Jan 04, 2018 2:02 am
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Thanks, Joao! I will get busy reading. :)
by Prowler901
Wed Jan 03, 2018 11:52 pm
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Ah yes, I mis-spoke about the nano. It is a pro mini, and it is not an original. It is from someone called Arducam. And, if I flip the FTDI over, then the GRN and the BLK contacts will be opposite. So, then I will need to cross over to connect RX1 and TX0. I've never programmed an arduino. It is som...
by Prowler901
Wed Jan 03, 2018 9:05 pm
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

Thanks, Joao. Also, my Nano board is a bit different from yours. I have the Sparkfun FTDI, but the RX1 and TX0 on my Nano are opposite from the ones on the FTDI. Does TX0 on the Nano connect to RX1 on the FTDI, and visa versa? Lastly, what sketch do I need to load on the Nano, and how do I do that? ...
by Prowler901
Wed Jan 03, 2018 6:43 am
Forum: eepSKYe
Topic: Serial in eepe/eepskye
Replies: 175
Views: 121078

Re: Serial in eepe/eepskye

OK. So, please forgive the newb questions... I have a 9X Pro with erSky9x rev 220. I understand I need to set up a trainer model in the radio. And, I have the parts in the attached image. After soldering the connections for the FTDI to the Arduino Pro Mini, what do I need to do next to get communica...
by Prowler901
Wed Dec 13, 2017 4:10 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro and X8R bound but no servo movement
Replies: 5
Views: 5115

Re: 9XR Pro and X8R bound but no servo movement

Well, I think I got it sorted. But, I'm not sure why. I just went through the binding procedure again through protocol menu. It seems to be working now. Any thoughts on this?

Thanks,
Todd
by Prowler901
Wed Dec 13, 2017 1:05 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro and X8R bound but no servo movement
Replies: 5
Views: 5115

Re: 9XR Pro and X8R bound but no servo movement

Yes, channel mixes are configured and all the bars move correctly. I bound it using the FS button on the module and the receiver. I've also done it using the bind option in the protocol menu.

Todd
by Prowler901
Tue Dec 12, 2017 8:24 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro and X8R bound but no servo movement
Replies: 5
Views: 5115

Re: 9XR Pro and X8R bound but no servo movement

Hi,
I've got r220 installed. And, Protocol is XJT and type D16. And, I'm using eepeSky to program.
by Prowler901
Tue Dec 12, 2017 5:00 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro and X8R bound but no servo movement
Replies: 5
Views: 5115

9XR Pro and X8R bound but no servo movement

Greetings All, I've been using a TH9X and ER9X with eePe for years, but I'm new to the 9XR pro and the new Frsky XJT RX's. I've got the RX and TX bound, and I'm getting telemetry from the RX. But, I can't get any of the servos to respond. They all get power and center up when the battery is connecte...

Go to advanced search