Thanks again, Joao! It works perfectly!
Many thanks to you and Mike for the work you do on this forum.
Todd
Search found 12 matches
- Mon Jan 08, 2018 3:36 am
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
- Sun Jan 07, 2018 7:37 pm
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Hi Joao, I think you just nailed it. I didn't look far enough down the list. I had the "arduino mini" selected. I looked further and saw the "arduino pro or pro mini" and selected that. So, I went through the process again and it appears that it has uploaded the sketch. At least ...
- Sun Jan 07, 2018 4:22 pm
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Yes, everything is connected/soldered with pins just as you showed in you picture. And, those are the results I get. So, I'm missing something else. Thanks, Todd Edit: I've added some photos for clarity. I don't think I have any cold solder joints. They all look pretty good to me. And, the green LED...
- Sun Jan 07, 2018 3:56 am
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Well, I'm not having any luck programming the mini. And, I haven't had much help from the Arduino board. I plug everything in and get a red LED on the Mini along with a flashing green LED. I press the reset button and press upload in the Arduino IDE program (desktop version) it compiles the code and...
- Thu Jan 04, 2018 2:02 am
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Thanks, Joao! I will get busy reading.
- Wed Jan 03, 2018 11:52 pm
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Ah yes, I mis-spoke about the nano. It is a pro mini, and it is not an original. It is from someone called Arducam. And, if I flip the FTDI over, then the GRN and the BLK contacts will be opposite. So, then I will need to cross over to connect RX1 and TX0. I've never programmed an arduino. It is som...
- Wed Jan 03, 2018 9:05 pm
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
Thanks, Joao. Also, my Nano board is a bit different from yours. I have the Sparkfun FTDI, but the RX1 and TX0 on my Nano are opposite from the ones on the FTDI. Does TX0 on the Nano connect to RX1 on the FTDI, and visa versa? Lastly, what sketch do I need to load on the Nano, and how do I do that? ...
- Wed Jan 03, 2018 6:43 am
- Forum: eepSKYe
- Topic: Serial in eepe/eepskye
- Replies: 175
- Views: 125496
Re: Serial in eepe/eepskye
OK. So, please forgive the newb questions... I have a 9X Pro with erSky9x rev 220. I understand I need to set up a trainer model in the radio. And, I have the parts in the attached image. After soldering the connections for the FTDI to the Arduino Pro Mini, what do I need to do next to get communica...
- Wed Dec 13, 2017 4:10 am
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro and X8R bound but no servo movement
- Replies: 5
- Views: 5154
Re: 9XR Pro and X8R bound but no servo movement
Well, I think I got it sorted. But, I'm not sure why. I just went through the binding procedure again through protocol menu. It seems to be working now. Any thoughts on this?
Thanks,
Todd
Thanks,
Todd
- Wed Dec 13, 2017 1:05 am
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro and X8R bound but no servo movement
- Replies: 5
- Views: 5154
Re: 9XR Pro and X8R bound but no servo movement
Yes, channel mixes are configured and all the bars move correctly. I bound it using the FS button on the module and the receiver. I've also done it using the bind option in the protocol menu.
Todd
Todd
- Tue Dec 12, 2017 8:24 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro and X8R bound but no servo movement
- Replies: 5
- Views: 5154
Re: 9XR Pro and X8R bound but no servo movement
Hi,
I've got r220 installed. And, Protocol is XJT and type D16. And, I'm using eepeSky to program.
I've got r220 installed. And, Protocol is XJT and type D16. And, I'm using eepeSky to program.
- Tue Dec 12, 2017 5:00 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro and X8R bound but no servo movement
- Replies: 5
- Views: 5154
9XR Pro and X8R bound but no servo movement
Greetings All, I've been using a TH9X and ER9X with eePe for years, but I'm new to the 9XR pro and the new Frsky XJT RX's. I've got the RX and TX bound, and I'm getting telemetry from the RX. But, I can't get any of the servos to respond. They all get power and center up when the battery is connecte...