openrcforums

I cut the link between the two middle ground pins and the two side ones, they are not connected to anything now. But it gives the same error: Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m128 -P usb -U eeprom:r:C:/Users/ask80/AppData/Local/Temp/temp.hex:i ====================...

Thank you, Reinhard and João, you are great! I tested with the Ohmmeter. The first two pins of the second row as seen in the below image are connected to GND. The third and fourth are each connected to one of the components marked with badly drawn black arrows in the second image. All GND pins are c...

An attempt with avrisp2, correct COM port, diamex buttons off, radio on: C:/Program Files (x86)/eePe/avrdude.exe -c avrisp2 -p m128 -P com25 -U eeprom:r:C:/Users/ask80/AppData/Local/Temp/temp.hex:i ================================================================================= avrdude.exe: stk500v...

I tried with the switches off and the radio off, and then with the switches off and the radio on. Both times, the error message is exactly the same.

Using the Diamex with stk500: ================================================================================= Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c stk500 -p m128 -U eeprom:r:C:/Users/ask80/AppData/Local/Temp/temp.hex:i =========================================================...

Your 10pin to 6pin adapter has 4 pins named "ground". But some programmers have signals on some of these pins and not ground. Check your programmers pins (without adapter) if really ervery of these 4 pins has ground connection. If not, 1.) the signals should not be connected together (wit...

Diamex error says: avrdude.exe: stk500v2_command(): command failed avrdude.exe: stk500v2_command(): unknown status 0xc9 avrdude.exe: stk500v2_program_enable(): cannot get connection status avrdude.exe: initialization failed, rc=-1 Double check connections and try again, or use -F to override this ch...

If the above programmer does not work, I also have one of those, but couldn't get it to work either:

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: error: programm enable: target doesn't answer. 1
avrdude.exe: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.

Okay, life got in the way and I had no time to try much more, just tried again to update the firmware of either my radio and the XJT module, without success. Following some advice in the forum I opened the radio and checked the solderings and everything looks fine, but the radio won't talk to the co...

No, I believe that function is blocked, but as the radio was bought years ago it might be old. I would update the firmware, if you believe that this could be the problem. I tried this afternoon but was getting a usbasp error - unfortunately didn't copy the text. Tomorrow I can have a look at why thi...

No I haven't, I am using the stock firmware.

I don't have the bind option in the menu, I am using the button on the backside of the module.

When I switch TX and RX on again after finishing the binding process, the red LED is permanently on, the green LED is very weakly blinking. It should be the green LED that is permanently on. In my flightcontroller configuration software (Betaflight) there is no movement for the sticks - and I am sur...

It is the 9XR.

I cannot bind my XM+ to my new XJT module and have been all over the web since yesterday to find a solution. - Turnigy 9XR, bought ca. 3 years ago at HK - XJT from a UK dealer, with LBT firmware - 2 XM+, one from BG, flashed successfully with LBT firmware, one from a Spanish dealer with LBT already ...

Hi, I am trying to flash the new er9x firmware onto my 9xr. I get the following error message: Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -P usb -U eeprom:r:C:/Users/ask80/AppData/Local/Temp/eebackup.hex:i ================================================================...