Search found 20 matches

by Guidobove
Thu Aug 27, 2020 8:33 am
Forum: openTx
Topic: Firmware for Turnigy 9RXpro
Replies: 2
Views: 386

Re: Firmware for Turnigy 9RXpro

Hello Joao, Thank you so much for helping me out. I am now using the eepsky ( EEPROM EDITOR-9XR-PRO ) revision 422 feb 18 2018 on my win PC and in the radio i have bootloader 1.3 and FW version ersky9x-r222 date 6.03.2020 mod REVB-X. Can you please tell me if i am up to date with this configuration ...
by Guidobove
Mon Aug 24, 2020 10:24 am
Forum: openTx
Topic: Firmware for Turnigy 9RXpro
Replies: 2
Views: 386

Firmware for Turnigy 9RXpro

Hello I am rather new in this matter. I have a turnigy 9XRPRO transmitter with a Frsky XJT D16 external module on it. Untill today i had version V1760 Mike from 4.12.2016 rsky9 R220 REVB-X with bootloader 1.3 running on it with no problems. I then upgraded the firmware to the latest open TX firmware...
by Guidobove
Tue Aug 15, 2017 3:40 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao I found it. Vspd was not in my telemetry screens (alt was). I set it in, then set beep to normal then i had the beeping sound when climbing and descending. Thank you so much for your help...little by little i am beginning to understand the software... Thank you for your patience.... Guido
by Guidobove
Tue Aug 15, 2017 7:42 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao Thank you for your answer. The firmware r220 i am using is the latest official by Mike on the website...i don't understand. There is only one test version that is higher. Do i have to install this test version.... I the radio setup / audiohaptic i changed the value to short normal long or...
by Guidobove
Mon Aug 14, 2017 1:42 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao I am still trying to make my vario work. I already putted an voice alarm on 100 m of altitude and that works. What i am completely unable to do is to let him give me climbing or descending tones. In the model setup screen on R220 firmware i have these values: Vario : source Vspd Switch : ...
by Guidobove
Tue Aug 08, 2017 11:12 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao

I changed the source to vspd
switch to gear
sensitivity to 6
sink tones checked

Wil it emit a beeping sound while sinking and if i uncheck sink tones will it emit a sound while climbing......

I dont understand what you mean by current source....

Guido
by Guidobove
Tue Aug 08, 2017 9:50 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao Yes i have a vario installed . It is a Frsky high precision model. In the model setup menu telemetry it says : vario : source ------- Switch : ------- Sensivity : 0 Sink Tones checked Current source : ------ on vario: source i can chose : vspd A2 SC1 to SC8 on switch : i can choose : THR ...
by Guidobove
Tue Aug 08, 2017 8:41 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao Before changing the battery....my 9RXPRO is brand-new...i went to setup radio date time and i changed the Date time and then i did a long menu push and guess what...time has changed and remains changed. Before i already changed the time but i didn't do the long menu push. I then changed t...
by Guidobove
Tue Aug 08, 2017 7:05 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao I Hope that you had a good weekend. I managed to make frisky telemetry work on my 9XRPRO working on ersky9x-r220 from 4.12.2016. in combination with the xr8 frsky receiver. The only problem is that i have to toggle the invert com1 box in the model setup telemetry screen on and out again e...
by Guidobove
Sat Aug 05, 2017 10:29 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao

I got the firmware on the website of EEpsky and that was te most recent one...
Where can i find the one you are talking about....
If i flash the transmitter with this firmware...i think i have to do every configuration from zero again... Oh boy...


Guido
by Guidobove
Sat Aug 05, 2017 10:23 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao

I found the screens....and yes things change....he also reads the voltage of the cells. So i am receiving telemetry
The comport is not inverted


Guido
by Guidobove
Sat Aug 05, 2017 10:10 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao I didn't respond to your earlier question... No i don't see any RSSI value...but i don't know where to find those telemetry screens and maybe the reason is that i didn't configure them. I inverted the com 1 port...that didn't change anything but it could be because i didn't configure any ...
by Guidobove
Sat Aug 05, 2017 9:41 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Joao I don't know how to make the telemetry screen appear on my transmitter... When i go in the model set up screen to telemetry and i chose custom i have this.... Custom display 1 ------- -------- ------- -------- ------- -------- Custom Display 2 ------- --------- ------- --------- ------- -...
by Guidobove
Sat Aug 05, 2017 8:49 am
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello I connected a lipo frsky voltage sensor to my RX8R receiver. On the lcd screen of the sensor i can read the values of the lipo battery. On the 9RXPRO transmitter with firmware r212 version 1760-Mike from 4.12.2016 i can't see anything on the screen. In the model setup protocol it says : PROTO ...
by Guidobove
Fri Aug 04, 2017 4:19 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Thank you so much for your help.
I will try it out tomorrow and keep you informed !


Sunny greetings from Belgium


Guido
by Guidobove
Fri Aug 04, 2017 4:03 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Halleluya praise the lord...it works. Thank you so much...i am really relieved. Now for the second problem... can i use the telemetry without doing any mod on the XJT module....will it work and be seen on the screen.... Do i have to do something in the telemetry screens ? the telemetry modules are :...
by Guidobove
Fri Aug 04, 2017 3:15 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Mike I tried it out. I changed PPM to XJT rx num 0 type D8 chans 8 failsafe not set country EUR 1st chan 1 then i pushed on the menu on BIND and the screen says "binding" I pushed on SF on the receiver and put it on...the light on the receiver is constantly red...the screen on the transmitter ...
by Guidobove
Fri Aug 04, 2017 2:40 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Mike

In the model setup screen i can only chose between PPM XJT DSM2 MULTI XFIRE.... I dont see the PXX or am i in the wrong screen...

Thank you Mike
by Guidobove
Fri Aug 04, 2017 1:55 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Re: Problem with 9XRPRO and frisky XJT

Hello Mike

Thank you for responding so quickly.
In the model setup menu i have selected proto PPM 8 CH 300 usec. I hope it is this what you mean

Thank you


Guido
by Guidobove
Fri Aug 04, 2017 1:31 pm
Forum: ersky9xr
Topic: Problem with 9XRPRO and frisky XJT
Replies: 38
Views: 7562

Problem with 9XRPRO and frisky XJT

Hello I am a complete newbie in the ERSKY9x firmware. I just bought a turnigy 9XR PRO and a FRSKY XJT module EU LBT model ETSI EN 300 328 v1.8.1 and a frsky rx8r receiver EU LBT I flashed the firmware of the transmitter with the frsky9xr_rom_r212.bin. The version is 1760-mike from 4.12.2016. This wa...

Go to advanced search