openrcforums

Thanks for the confirmation, Mike!
I guess "workaround" was the wrong word since it's obviously not possible with a single logic switch. Three instead of one works for me, I hardly use them anyway

Stefan

Hi, I'm trying to set up a logical flip flop switch that is only active when another switch is active. This is easy and works, however I also want that logical switch to always start in the "low" position after it was inactive. To explain it differently with an example setup: L1 F-Flop SW1...

To bring this thread back up after more than a year: Yes it is possible to use these gimbals in a T9X without loosing any resolution. You just need a linear 3.3V converter. You need to run all gimbals and potentiometers at 3.3V and supply the AREF pin of the Atmega with 3.3V. This way you get the fu...

That worked, thanks!
Still got the blank screen though
Edit: It WORKRS! Now I'm all set for testing

Here is the original post by flybabo: https://www.rcgroups.com/forums/showpos ... tcount=917

Ok, now I get a few other errors :shock: In file included from menus.cpp:17: menus.cpp: In function 'void menuProcModelIndex(uint8_t)': en.h:231:28: error: unable to find string literal operator 'operator""STR_THR_REVERSE' with 'const char [55]', 'unsigned int' arguments #define STR_T_EXPO...

Thank you, will try that when I get home.

Essentially I just need the "normal", latest er9x-128 configured for serial LCD. But if I follow flybabos tutorial I just get a blank screen (even after changing the contrast). The older version from midelic (for an Atmega64) does work on my Atmgea128 devboard and core9x prototype (also 12...

Hi Mike, I tried that and now I get the following error: menus.cpp:976:56: internal compiler error: in type_hash_canon, at tree.c:6619 typedef PROGMEM void (*MenuFuncP_PROGMEM)(uint8_t event); Oh and I just stumbled on flybabos post about custom lcds on rcgroups (https://www.rcgroups.com/forums/show...

Hi, I'm trying to compile er9x on macOS with serial LCD enabled for an Atmega128. But I get the error message: menus.cpp: In function 'int16_t calc_scaler(uint8_t, uint8_t*, uint8_t*)': menus.cpp:283:3: error: 'store_telemetry_scaler' was not declared in this scope store_telemetry_scaler( epscaler->...

Hi Joao,
thanks!
I already had a look at the ArUni, but I am building a One-Hand-Transmitter (much like the Becker-fm s48mc), so the ArUni board is way to large

Stefan

Hi Mike,
I'm building my own transmitter based on a small AVR dev-board with an ATmega128a.

Stefan

Has anybody tested how much resolution is actually lost if you use a voltage divider to step down the 5V to 3.3V?
I wonder if the loss would be even noticeable.

Stefan