Search found 87 matches
- Fri Apr 24, 2020 6:24 pm
- Forum: FRSky Horus radio
- Topic: Horus X10S Express EU <--> Non EU
- Replies: 9
- Views: 13918
Re: Horus X10S Express EU <--> Non EU
Hello, I changed the script "isr_mode_1.lua" to adapt it to Horus X10 Express. I only tried it in the Companion simulator, the presentation and keyboard part worked fine, but I couldn't test read and write of LBT-FCC mode. If you want to test it under your responsibility, you have it here...
- Fri Apr 24, 2020 2:23 pm
- Forum: openTx
- Topic: FrSky ACCESS features support
- Replies: 2
- Views: 2458
Re: FrSky ACCESS features support
OTA is supported. Telemetry from multiple sources... current ACCESS firmware actually doesn't support it yet, FrSky kinda pushed it to "future improvement"... Thanks Kilrah. It looked like multiple RX telemetry is supported by OpenTX 2.3, even by looking at RSSI source selector, but if Fr...
- Fri Apr 24, 2020 1:14 pm
- Forum: openTx
- Topic: FrSky ACCESS features support
- Replies: 2
- Views: 2458
FrSky ACCESS features support
Is OpenTX able to fully support new ACCESS features? Like telemetry from up to three receivers or OTA? The first one seems not to be implemented yet. I have two ACCESS 2.1.0 receivers bound to my radio running OpenTX 2.3.7. Telemetry reads data from the first receiver only. Also RSSI source cannot b...
- Thu Jan 09, 2020 8:25 am
- Forum: openTx
- Topic: OpenTX 2.3 radio log viewer
- Replies: 0
- Views: 2429
OpenTX 2.3 radio log viewer
Is there a log viewer which would work on the radio with OTX 2.3 ?
Unfortunately LView (https://github.com/RealTadango/FrSky/tree/master/LView) seems not to be maintained any more and it is not working on 2.3...
Unfortunately LView (https://github.com/RealTadango/FrSky/tree/master/LView) seems not to be maintained any more and it is not working on 2.3...
- Thu Nov 21, 2019 12:21 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
Re: MultiTX module as trainer / OTX 2.3.2 on Horus X10
Only if the radio has the ACCESS module, and that module has had a hardware modification done to it. It is Express version, so it has ACCESS module. Was trying to find something about this HW mod, but coudn't - would you have some link? I guess I will simply wait for PARA bluetooth to be implemente...
- Wed Nov 20, 2019 9:22 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
Re: MultiTX module as trainer / OTX 2.3.2 on Horus X10
Companion still needs a bunch of work to be brought up to speed with all the multi related changes. But if it's not on the radio it's not available. The module pin has never been available as an input on the Horus platform. Oh, that's a bummer :(. So, if input pin is not available on Horus at all, ...
- Wed Nov 20, 2019 7:35 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
Re: MultiTX module as trainer / OTX 2.3.2 on Horus X10
This functionality has been pushed to a further release due to the need for a safety-related fix which 2.3.2 is. Thanks Kilrah. They must have it wrong on MultiTX github docs (link above): Available in OpenTX 2.3.2, Trainer Mode Master/Multi And what about SBUS / CPPM? I thought it was already avai...
- Wed Nov 20, 2019 4:14 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
Re: MultiTX module as trainer / OTX 2.3.2 on Horus X10
(Sorry for posting one after another)
In 2.3.2 Companion SBUS / CPPM / Multi options are available, but grayed. What's interesting Bluetooth options are missing...
In 2.3.2 Companion SBUS / CPPM / Multi options are available, but grayed. What's interesting Bluetooth options are missing...
- Wed Nov 20, 2019 3:59 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
Re: MultiTX module as trainer / OTX 2.3.2 on Horus X10
In fact I cannot get anything else than Master/Slave for Jack or Bluetooth as a trainer on Horus. No SBUS, no Multi...
- Wed Nov 20, 2019 3:56 am
- Forum: openTx
- Topic: MultiTX module as trainer / OTX 2.3.2 on Horus X10
- Replies: 8
- Views: 5730
MultiTX module as trainer / OTX 2.3.2 on Horus X10
Seems it ishould be possible on OTX 2.3.2 to use FlySky RX mode (protocol 56) of MultiTX module as a trainer in master mode. https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#flysky-afhds2a-rx---56 The above says that OpenTX 2.3.2 is required, which I have ...
- Mon Nov 11, 2019 6:27 am
- Forum: openTx
- Topic: PARA trainer in Horus X10/S Express / OTX 2.3.1
- Replies: 8
- Views: 5792
- Sun Nov 10, 2019 8:18 am
- Forum: openTx
- Topic: PARA trainer in Horus X10/S Express / OTX 2.3.1
- Replies: 8
- Views: 5792
Re: PARA trainer in Horus X10/S Express / OTX 2.3.1
Is it really gonna to be included in 2.3.2? It is not on the list here:
https://github.com/opentx/opentx/issues ... X+2.3.2%22
https://github.com/opentx/opentx/issues ... X+2.3.2%22
- Sun Nov 10, 2019 4:55 am
- Forum: FrSky Taranis radio
- Topic: Frsky, what are you doing and what do you want?
- Replies: 2
- Views: 3292
Re: Frsky, what are you doing and what do you want?
It also helps if you read specs and instruction manual of specific model before purchase. Would spare you necessity of writing posts ranting on something that is simply not in the specification of the product.
- Sun Nov 10, 2019 4:37 am
- Forum: openTx
- Topic: PARA trainer in Horus X10/S Express / OTX 2.3.1
- Replies: 8
- Views: 5792
Re: PARA trainer in Horus X10/S Express / OTX 2.3.1
There's been a fix for the X10e that will be in 2.3.2 it seems. https://github.com/opentx/opentx/issues/6910 Thanks Kilrah - It seems it is exactly it! I was just about to write that I put FrOS back to X10S and PARA module was working perfectly and I was able to use the trainer. So it must be a bug...
- Sun Nov 10, 2019 3:51 am
- Forum: openTx
- Topic: PARA trainer in Horus X10/S Express / OTX 2.3.1
- Replies: 8
- Views: 5792
Re: PARA trainer in Horus X10/S Express / OTX 2.3.1
I have X10S Express and X9DP SE 2019, so both PARA.
What I have noticed though is that X10 is not showing Local Address in radio setup (and there is no place for Remote Address as well).
Seems like my X10 is having hw issue with contacting PARA module. Do I read "the signs" correctly?
What I have noticed though is that X10 is not showing Local Address in radio setup (and there is no place for Remote Address as well).
Seems like my X10 is having hw issue with contacting PARA module. Do I read "the signs" correctly?
- Sat Nov 09, 2019 7:27 am
- Forum: openTx
- Topic: PARA trainer in Horus X10/S Express / OTX 2.3.1
- Replies: 8
- Views: 5792
PARA trainer in Horus X10/S Express / OTX 2.3.1
Hi, is new PARA bluetooth already fully supported in OpenTX 2.3.1 running on Horus X10/S Express? In Radio / Hardware I select "Bluetooth: Trainer" and then in model config "Trainer Mode: Master/Bluetooth". Problem is that when I select Discover it is like nothing is happening at...
- Mon Aug 19, 2019 10:03 am
- Forum: openTx
- Topic: Total duration time in Companion
- Replies: 3
- Views: 3601
Re: Total duration time in Companion
That would be very useful to have there sum of the durations (of all flights), not a time between beginning of the first flight and finish of the very last one (this is not total duration in this context, assuming it should be sum of all listed durations). Proper total duration would show how much t...
- Sun Aug 18, 2019 9:55 am
- Forum: openTx
- Topic: Total duration time in Companion
- Replies: 3
- Views: 3601
- Sun Aug 18, 2019 9:29 am
- Forum: openTx
- Topic: Total duration time in Companion
- Replies: 3
- Views: 3601
Total duration time in Companion
What is the logic behind total duration time? or is it just a bug?
- Mon Jun 24, 2019 7:29 am
- Forum: FRSky Horus radio
- Topic: x10, both Internal & External antennas on OpenTx 2.2.3
- Replies: 6
- Views: 7323
Re: x10, both Internal & External antennas on OpenTx 2.2.3
This is what I thought. It also has two internal antennas (apparently as X10 no S). I'm surprised all antennas cannot be used in the same time, as in X12S.
- Sun Jun 23, 2019 10:31 pm
- Forum: FRSky Horus radio
- Topic: x10, both Internal & External antennas on OpenTx 2.2.3
- Replies: 6
- Views: 7323
Re: x10, both Internal & External antennas on OpenTx 2.2.3
Is it the same in X10S?
- Tue Mar 05, 2019 9:37 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
I will add one, because it is easy to do and hardly make the thing more complex or expensive... but you are right, I have remote ports on my commercial drivers and I’m not using them at all.
- Tue Mar 05, 2019 12:19 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
I guess this is one of a reasons we have slightly different approach to the design of this thing .
- Tue Mar 05, 2019 11:36 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
Well, that is the idea. Specially on four stroke engines I keep the plug ON when the engine is at idle and a little above. Plug turns OFF at about 1/3 throttle. I don't know what radio you use, but mine has telemetry and I can program logic on it. This means that I can program it to detect if the p...
- Tue Mar 05, 2019 10:46 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
Nothing worse than going to the field, engine being too stubborn to fire, and then after one hour if trying you finally find out that along with the wrong carb setting, your glow starter is also not working well, or the glow plug got bad. So, power panel all the way :) at least I can see when, and ...
- Tue Mar 05, 2019 5:05 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
The problem is that the glow starter batteries are often too small and/or in poor shape. They are usually 1.2 Ah and work well initially when freshly charged but lose capacity and develop high internal resistance as they age. I use a big fat D size 5 Ah NiCd which lasts for weeks and fires up engin...
- Tue Mar 05, 2019 1:29 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
Ok, then feel free to design your driver with a voltage regulator as you said somewhere above, and see if it works. You will have to adjust it to your plug.. then connect It to an RC switch so you are able to control it with your radio.. Please post your results. Will do Joao. Will rather use switc...
- Mon Mar 04, 2019 10:52 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
Back in the day we were using 2V lead-acid cells, the NiMH thingy came later. Right, technology limits of the time :). From what Wikipedia says 2V was too high and needed to be brought down to 1.5V. Lead-acid battery cells that are used to ignite a model engine glow plug, due to their two volt outp...
- Mon Mar 04, 2019 10:46 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
You forgot that the resistance of the plug will be completely different once it gets hot. resistance will increase.. So, 5 amperes are far out in my opinion :) A driver is designed to be a constant current device.. What is important in this case is the current not the voltage. Try a small 1.5V batt...
- Mon Mar 04, 2019 1:32 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Onboard Glow Igniter With ATtiny85
- Replies: 59
- Views: 44681
Re: Onboard Glow Igniter With ATtiny85
Stable 1.5V might work for some plugs, or might not. It depends on what current the battery can supply as well.. The resistance of brand new OS no. 8 plug is 0.3ohm. So the current at 1.5V will be 5A (which is inline with my measurements, +/- resistance change due to temp change or imperfection of ...