openrcforums

it work too ... can you tell me why now work? setup is that same like on start?

Its WORK!!!

Mike you are great. Very thanks for help

yes i see RSSI and Tx. That all value what i see

finally i get time to check and is a little problem. on Debug i have calculate first value and second is 0000 its looks like good connect but I dont see any information from sensor. I use 2 sensor and both is connect to smart port. this sensor is: Smart Port RPM sensor and Smart Port Mini Lipo volta...

I do that like you tell me and finally something change
in the DEBUG menu i see first value is all time changing (calculate in hex) and second value still stay 0101
Telemetry still dont work

still dont work

Sorry for long answer i have bad time in work... If i good understand you i plug external cable normally (connected at back of module 2 tops pins in 4 way and on top of controller to training plug) and make a new connect from top pin in 3 way connector to 2 pin from top in 4 way connector?

i open radio and all looks good. when i turn off i see message "SHUTTING DOWN"

i try push, move, pressing the module and nothing change. Still i have first value 0000 and second 0101. I try too with external cable Do you have any idea what i can do?

i have problem to read today

MikeB wrote: ↑Wed Feb 22, 2017 12:30 pm and the model in control

when model in control them i see:
DEBUG
TelRxCount 0000 0101

on DEBUG screen i have TelRxCount 0001 0101
i put back invert COM 1 off
i use FrSky X8R

I put "Invert COM1" option and still nothing. I cant control my model but dont have telemetry

i have external XJT and internal OFF and still dont work On photo you can see my all config meaby in next step i do mistake.

I plug it to place for module in back ... that all what i do

Sorry i wrong understand you i dont have module inside

yes this can help https://naforum.zapodaj.net/thumbs/ef8328426016.jpg https://naforum.zapodaj.net/thumbs/0f560f86c387.jpg https://naforum.zapodaj.net/thumbs/71657a009ea4.jpg https://naforum.zapodaj.net/thumbs/b8022b0a29c8.jpg https://naforum.zapodaj.net/thumbs/5342481f15c7.jpg https://naforum.zapoda...

ok in external module i have XJT but what in interial module? dont use this?

Hi I try config this from 2 day and nothing :( . Today on my 9XR PRO I update to r220. first what I want do is change protocol to PXX but i dont have this option. I have (internal module) only PPM, DSM, Multi. Next strange things is i can change protocol in 2 place and here (external module) i have ...