Search found 10 matches
- Fri Dec 29, 2017 1:23 am
- Forum: tgy9xr
- Topic: Turnigy 9XR Settings
- Replies: 5
- Views: 10617
Re: Turnigy 9XR Settings
I followed your instructions and motors now work fine. Thanks again!!
- Fri Dec 29, 2017 1:03 am
- Forum: tgy9xr
- Topic: Turnigy 9XR Settings
- Replies: 5
- Views: 10617
Re: Turnigy 9XR Settings
Thanks!! FYI the external module in my 9XR Pro doesn't show PXX as an option. I have read that XJT is the correct external protocol option and I have selected that. That may actually be the PXX choice you refer too. Also what does the internal module protocol settings need to be if any? Thanks again.
- Thu Dec 28, 2017 10:52 pm
- Forum: tgy9xr
- Topic: Turnigy 9XR Settings
- Replies: 5
- Views: 10617
Turnigy 9XR Settings
I would appreciate some assistance with my Tarot 680 PRO setup. I haven't had much luck since changing my DJT module and D series receiver to the module and receiver listed below. TX: Turnigy 9XR Pro (XJT module) w/ersky9x-200, v. 1760-Mike RX: FrSky X8R using SBUS FC: Naza M V2 If anyone has the sa...
- Thu Feb 16, 2017 8:50 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Gspd and Galt
- Replies: 6
- Views: 5492
Re: Gspd and Galt
I hoped with the Naza GPS and telemetry cable I could get the data. Apparently not. I added a flight pack voltage sensor and I'm out of connection ports. I appreciate the help and suggestions.
- Thu Feb 16, 2017 8:22 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Gspd and Galt
- Replies: 6
- Views: 5492
Re: Gspd and Galt
That's what I'm trying to determine. I posted my hardware hoping that someone would tell me specifically what I needed to make it work or if I needed to set up the radio differently. I'm new to this and just been lucky getting things to work so far. What other hardware do I need? Thanks!!
- Thu Feb 16, 2017 3:18 am
- Forum: Turnigy 9XR PRO radio
- Topic: Gspd and Galt
- Replies: 6
- Views: 5492
- Wed Feb 15, 2017 10:28 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Gspd and Galt
- Replies: 6
- Views: 5492
Gspd and Galt
Equipment: DJI NAZA-M V2 FrSky D8R-II Plus FrSky FBVS-01 Battery Voltage Sensor Turnigy 9XR Pro Frsky Telemetry & Head Track Module Extent Cable I'm trying to understand how to set up a model to display the Gspd and Galt. I have the telemetry screens with the items showing but I obviously don't ...
- Sat Feb 04, 2017 11:57 pm
- Forum: Hardware
- Topic: Turnigy 9xr Pro Telemetry Setup
- Replies: 5
- Views: 5503
Re: Turnigy 9xr Pro Telemetry Setup
Also check out Er9x/Ersky9x Video Tutorials here: (https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9). There is some more info here too: 9XR-Pro Manuals for erSky9x: (http://openrcforums.com/forum/viewtopic.php?f=122&t=5575#p79483). ( Note: Being created is an ErSky9x Man...
- Sat Feb 04, 2017 11:45 pm
- Forum: Hardware
- Topic: Turnigy 9xr Pro Telemetry Setup
- Replies: 5
- Views: 5503
Re: Turnigy 9xr Pro Telemetry Setup
Have a look at the er9x manual here: http://openrcforums.com/forum/viewtopic.php?f=5&t=6473#p90349 . This should cover most of your questions. If using the DJT, do you have the cable that connects the telemetry data port to the Futaba trainer socket? Mike. I have the telemetry cable attached to...
- Sat Feb 04, 2017 1:07 am
- Forum: Hardware
- Topic: Turnigy 9xr Pro Telemetry Setup
- Replies: 5
- Views: 5503
Turnigy 9xr Pro Telemetry Setup
I'm an old man with a new toy. I have recently bought a new Turnigy 9xr Pro (late 2016) and immediately upgraded it to Vers: V. 1760-Mike and SUN: ersky9x-r220. I built a quad and Tarot 680 Pro. I'm using a Naza M V2 with a D8R-ii Plus receiver and DJT radio module for both. I haven't found any menu...