openrcforums

Try this elrs firmware for your r9 hardware. Its a serious update....
https://github.com/ExpressLRS/ExpressLRS/wiki

I am having an issue with latest firmwares. I have a model witch uses frsky compatible rx. So on my 9x with 9xtreme board and xjt module I usually set it on xjt protocol and d8 mode and everything works. On versions g5, g2, and g1 I lose connectivity. Rx is still bound but channels don't move. On f4...

I think its not possible without using trainer port. You have tried using trainer port? I believe the intented way is to use trainer port to pass the 3 desired channel values (lets say chan 6-7-8 or PPM1-PPM2-PPM3). Connect your gimbal to the corresponding channels (6-7-8) on X8R and then configure ...

I believe its a gps issue or something else fc related. Definitely not transmitter. What gps you have? How many satellites you lock on? Can you upload any log from the fc? I also believe in rcgroups forum you will find more expertise on fc related stuff Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Ta...

Frsky xjt module +x*r receiver. The only real pros is you get 16 channels and maybe later if you upgrade or mod your tx a telemetry on your tx , scripts , and who knows what more is coming. It all comes to what you are going to fly. Where is apm going to sit on? Στάλθηκε από το LG-D855 μου χρησιμοπο...

I think you dont need 2x X8R. Get one and an sbus decoder. You can take 16 chans from the decoder which will use only one slot from x8r and give power through an other slot of the x8r

Two main choices are opentx and ersky. While open tx has more templates ready to just copy and play , ersky is more powerfull if you decide to start hardware mods on your tx. Both are really capable of getting the job done
Also i think opentx has bigger community

Lets continue here viewtopic.php?f=98&t=10107

Go to System setup > Type select and use airplane or glider Go back to system setup > Aux switches and enable all swithes. If you cant get more than 6 channels and you need them you may need to upgrade your tx. https://s7.postimg.org/4fmoyvrpj/20170505_205048.jpg Go then twice back to Functions > Au...

I think you can get only channels 1-3 from convetional channel outputs. what does the jumper do in the binding procedure? i think this is not supported on x4rsb. X8R maybe. At least nothing is stated on x4rsb manual. So now what? solution one is get an sbus decoder and use channel 5 from there. solu...

What flight controller you have. Do you know what channel values you need to achieve your goal?

Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Tapatalk

Just to answear my question. Yes i can. Some things from guides slightly different. Take note if anyone else tries it if 9x battery is more than 10v, x8r may get damaged.

Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Tapatalk

Hello i have a Tgy9x with 9xtreme and an Xjt module with an x8r receiver. I want to update the firmware on the XJT module and on the x8r receiver. My firmware on radio is latest ersky. I have found a guide demonstating the how to using 9xr pro. Some other guides suggest doing it through a taranis wh...

The conection between your receiver and the tank is sbus or analog? Is it one cable for all channels or seperate cable for each one. If it is seperate you can connect you channel 5 to the ir battle system and assign this to a switch on your fs t6. Then you can change the switch with a momentary one ...

Xjt works with stock firmware?

https://www.frsky-rc.com/download/down.php?id=102 Read the maual of your receiver. There are some modes you can bind it. Considering you have a pixhawk i suggest Mode4(D16) Rebind and use Sbus port to connect to RCin of Pixhawk. You will get 1-16 chanels through sbus , and (9 to 16) through analog p...

Using C&T manual http://www.craftandtheoryllc.com/downlo ... Manual.pdf
i set my SERIAL4_PROTOCOL on mission planner to 10.


Serial 4 is conected to rs232>TTL , and converter is conected on X8R smartport

Data came through.

Yes its a Pixhawk with apm copter loaded.

I dont want ETA's , i know that i am asking from an open source community and the nature of it.
A Big THANK YOU for the interest and the concern

I guess native mavlink. My setup is with a TTL to RS232 convertor and a XJT-X8R. Like this. Awesome! I could have saved $38USD by building my own RS232 to TTL Converter for FrSky Telemetry from a Pixhawk: http://www.ebay.com/itm/142076966567?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%...

Is it possible to translate warning messages (Like "Bad AHRS" - Incossistent Compasses") from pixhawk - Adrucopter to our transmitter and show them on screen? Maybe even add some voice ? I saw this feature on a Taranis with C&T module and was wondering if it is possible to port it...