Search found 4 matches
- Sat Aug 12, 2017 3:37 pm
- Forum: Hardware
- Topic: M9 Gimbal X9E
- Replies: 0
- Views: 1753
M9 Gimbal X9E
Hi!! on my way to put som brand new m9 gimbals in my X9E radio. And all is well... Exept for one thing Just tested the Elevetor / Ail gimbal. And when i check in the radio the Elevator is inverted. So upp on the gimbal is down in the radio! Is there Eanyway to change this in the radio.. exept for Re...
- Sun Jun 18, 2017 8:33 am
- Forum: General help (FrSky Taranis radio)
- Topic: Mlvss Lipo Voltage sensor MINI problems
- Replies: 7
- Views: 7044
Re: Mlvss Lipo Voltage sensor MINI problems
Thanks for a quick anwser...
Now it works,.... but is the separat cell values always calculated.
and not Realtime from cell to cell....
Example if 1 cell in 3.50 and a notther cell is 3.52 the calculated cell volt is 3.51v insted of showing the Real live value of a cell
Now it works,.... but is the separat cell values always calculated.
and not Realtime from cell to cell....
Example if 1 cell in 3.50 and a notther cell is 3.52 the calculated cell volt is 3.51v insted of showing the Real live value of a cell
- Sat Jun 17, 2017 10:57 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Mlvss Lipo Voltage sensor MINI problems
- Replies: 7
- Views: 7044
Mlvss Lipo Voltage sensor MINI problems
Hi!!!! I bought a buch new frsky Lipo Voltage Sensors The MINI one. Without The Display. running Open TX 2.2 in my X9D+ and X8R Reciver 8Chan mode When i search for new Sensors i Only Get ONE value And that value is The Total cell voltedge of the 3s lipo Value CELLS But i want to have indevidiual ce...
- Fri Dec 09, 2016 1:23 am
- Forum: Other Radios
- Topic: Frsky XJT on futaba
- Replies: 3
- Views: 9502
Frsky XJT on futaba
Hi!!
Have a futaba t12FG and i want to make the XJT modul to work with my trainerport!
Is there a way just to do like a spectrum modul hack and run the ppm signal from the futaba trainer port
To the input of the XJT Tx module and get it to work.
Best regards Janne /Sweden
Have a futaba t12FG and i want to make the XJT modul to work with my trainerport!
Is there a way just to do like a spectrum modul hack and run the ppm signal from the futaba trainer port
To the input of the XJT Tx module and get it to work.
Best regards Janne /Sweden