Search found 25 matches
- Wed Mar 21, 2018 9:13 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
Yes, I bind using the bind option in the Protocol / Multi menu in Ersky9x. No need for the module's bind button. I also don't need the rotary switch or the USB connector as I flash the module using the radio. The LED was moved from the multi PCB to the back of the radio.. João Thanks for your answe...
- Wed Mar 21, 2018 8:39 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
I finally got some time to try it again to flash the module. What I did was I flashed the firmware direct to the module. I couldn't get the flashing from the tx to work. I bound the radio to my whoop and I'm a happy flying indoors..:-) I have another question: I know that you ,João, use the module a...
- Sat Feb 24, 2018 8:56 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
Hay Mike, I have set it to 'Flash from tx'. I followed the steps again, to see what I could have missed but I think I did everyting right. Still the same error on the tx. After that I selected the option 'Upload via serial', so I uploaded the firmware via the FTDI adapter to the module. So the modul...
- Sat Feb 24, 2018 8:16 am
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
The bootloader is a different piece of firmware. Go here: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling_STM32.md#preparing-to-upload-the-firmware , then follow the instruction for "Burn the bootloader". Mike Thanks Mike! Somehow I skipped that step...
- Thu Feb 22, 2018 12:07 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
What bootloader did you flash to the module? The STMduino bootloader is for flashing from the USB, not the radio. In the Arduino IDE, have you used the "boards manager" and installed "Multi 4-in-1 STM32 Board"? Hay Mike, I'm a bit confused. Is it correct if I say that I first ha...
- Sat Feb 17, 2018 9:57 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
Well, I tried to flash the module from my tx but I only get the message 'Failed'...[emoji849] When I was flashing the bootloader to the module via the FTDI adaptor, the FTDI voltage was set to 5V. Is it possible I fried the module? When the module is in my tx and I turn the tx on, the red light on t...
- Thu Jan 25, 2018 3:35 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
Thanks Rad! I will check everything twice...[emoji3] You are helping a lot this way! I hope In can get to it this weekend.
Verstuurd vanaf mijn Nexus 5X met Tapatalk
Verstuurd vanaf mijn Nexus 5X met Tapatalk
- Mon Jan 22, 2018 1:37 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: RE: Re: Another two modules thread. 2.0
collect2.exe: error: ld returned 1 exit status exit status 1 I had the same problem that occurred by simply adding or removing a line of code or even a comment. There obviously is a well known, but never resolved problem in the linker in, at least, arduino 1.8.0 . You may try the following (it did ...
- Sun Jan 21, 2018 9:15 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: RE: Re: Another two modules thread. 2.0
That version I used on the video is very old already.. You should flash the latest version. About setting the arduino IDE and compiling and flashing the multiprotocol code, please follow the link and read the documentation. Things changed a bit :) https://github.com/pascallanger/DIY-Multiprotocol-T...
- Sun Jan 21, 2018 8:46 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53006
Re: Another two modules thread. 2.0
Surprisingly after something like 40 atempts I managed to flash the module!!! I did the same again and again and again, but for some unknown reason it worked now. I have the same issue as Rad but after 40 times still no luck... :( What I have done (I followed the youtube video from João to the lett...
- Mon May 29, 2017 7:44 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
It shows that theory and real life sometimes not the same!
Good thing you have tested this thoroughly!!
I like the two Mosfet solution
Is this board ready to make? Or do you still want to test something on the two-Mosfet board?
Maarten
Good thing you have tested this thoroughly!!
I like the two Mosfet solution
Is this board ready to make? Or do you still want to test something on the two-Mosfet board?
Maarten
- Wed May 24, 2017 12:34 pm
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Nice demonstration João!
Can't wait untill you had the time to test this with the charging port b/c after that I would very much like to make the PCB you made and put it in my radio..
Maarten
Can't wait untill you had the time to test this with the charging port b/c after that I would very much like to make the PCB you made and put it in my radio..
Maarten
- Tue May 23, 2017 6:44 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Incredible how fast you made this!! (you just never sleep, right?!)
Looks nice and I hope you will not frie the 9x board...! I have my fingers crossed...
I assume you have a 9X board to test it on? Otherwise I can also test it of cource.
Maarten
Looks nice and I hope you will not frie the 9x board...! I have my fingers crossed...
I assume you have a 9X board to test it on? Otherwise I can also test it of cource.
Maarten
- Mon May 22, 2017 6:31 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
You have don a lot of work again João! It keeps better and better..
I will have a look for a program, the one I used in the past, to see if it is still free to use.
I have a question: is the 6 pin connector missing from the PCB? Or do you have a other way of connecting the board to the radio?
I will have a look for a program, the one I used in the past, to see if it is still free to use.
I have a question: is the 6 pin connector missing from the PCB? Or do you have a other way of connecting the board to the radio?
- Fri May 19, 2017 12:23 pm
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Wow João! The speed you come up with designs is amazing...
The number of parts is indeed kept as low possible. Nice!
You will test this on the breadboard, but do you also test circuits with a computer program?
Single sided PCB would be nice...
The number of parts is indeed kept as low possible. Nice!
You will test this on the breadboard, but do you also test circuits with a computer program?
Single sided PCB would be nice...
- Fri May 19, 2017 6:37 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Are the circuits in the red and green rectangles as the original circuits in the radio (exept for the green LED with resistor in the green rectangle)? Will breadboard this a bit later as my wife is getting in my nerves now.. She needs my computer.. GGGRRRRR v :twisted: :mrgreen: You have to keep you...
- Thu May 18, 2017 12:44 pm
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Super that it connects to the 6 pin connector! Right, I understand the ON/OFF switching of the radio and charging circuit. I think I have an idea of what to do, I think i will go back to one of my original ideas for the charging circuit, and it will use the original positive switching but controlled...
- Thu May 18, 2017 11:39 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
The board that you and andrewju have designed (in more then one version), is it connected via the original 6 pin connector from the orignal switch board? Let me put it like this: Is this new board a drop-in replacement for the original switch board? Ok, a little update. My previous design that I hav...
- Thu May 18, 2017 6:52 am
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Let me check. It's been a while.. João Of course! Take your time... :D Thanks for looking into it agian! You also andrewju!! Let me check if I still have my Eagle files for this project (it may take me a couple of days)... I should certainly have some unpopulated PCBs of it, for sure! That is a rea...
- Wed May 17, 2017 7:33 pm
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Which radio do you have? I have a Turnigy 9X with a 9Xtreme smartieparts board and (since a few days) with the M9 gimbals in it. If you want to build one we can revive this project :) I really want to build one because I want to have more safety build in the radio.. :) Do you have the circuit with ...
- Wed May 17, 2017 1:16 pm
- Forum: Hardware
- Topic: 9X (and possibly 9XR/PRO) Switch Board Design
- Replies: 70
- Views: 31036
Re: 9X (and possibly 9XR/PRO) Switch Board Design
Hello João,
I'm wondering how this project is going. Have you been able to test this project lately?
I sure would like to help with the testing if that is what still needs to be done.
This redesign of the switch board is a important mod I thinks!
Best regards,
Maarten
I'm wondering how this project is going. Have you been able to test this project lately?
I sure would like to help with the testing if that is what still needs to be done.
This redesign of the switch board is a important mod I thinks!
Best regards,
Maarten
- Sat May 13, 2017 6:55 pm
- Forum: Hardware
- Topic: FrSky M9 gimbals in a 9x - photos (traffic!)
- Replies: 109
- Views: 73492
Re: FrSky M9 gimbals in a 9x - photos (traffic!)
Thanks all of you for the reply's! I reversed my sticks, now it's all ok.
I love the feel of the M9's and the precision! Nice mod...
P.S. I reversed the sticks on the radio (not via eepskye)
I love the feel of the M9's and the precision! Nice mod...
P.S. I reversed the sticks on the radio (not via eepskye)
- Sat May 13, 2017 7:44 am
- Forum: Hardware
- Topic: FrSky M9 gimbals in a 9x - photos (traffic!)
- Replies: 109
- Views: 73492
Re: FrSky M9 gimbals in a 9x - photos (traffic!)
Thanks Bob!! I will look into it this weekend...
- Fri May 12, 2017 8:43 pm
- Forum: Hardware
- Topic: FrSky M9 gimbals in a 9x - photos (traffic!)
- Replies: 109
- Views: 73492
Re: FrSky M9 gimbals in a 9x - photos (traffic!)
I got my M9's in. It went super easy because of your post Andrewju!! I cut off less meterial of the alu plate: https://2.bp.blogspot.com/-_j05Gd2_mqA/WRYZEg1G_8I/AAAAAAAADTI/sWUFLk2UMoUqdFzif4hoGjOuHq5dRiUJACKgB/s640/IMG_20170512_201634.jpg I soldered my gimbals instead of using connectors.. :) But ...
- Wed Apr 26, 2017 11:41 am
- Forum: Hardware
- Topic: FrSky M9 gimbals in a 9x - photos (traffic!)
- Replies: 109
- Views: 73492
Re: FrSky M9 gimbals in a 9x - photos (traffic!)
I also got a couple of M9 gimbals for my 9Xtreme (after 9 weeks of waiting for HorusRC to have stock again).
Thanks for the posts andrewju!! This will make the mod go so much easier! Knowing where to look for and what I can expect.
When I got them in I will report if aything when different.
Thanks for the posts andrewju!! This will make the mod go so much easier! Knowing where to look for and what I can expect.
When I got them in I will report if aything when different.