openrcforums

Hi. I was seeing that in the taranis, in the output page, the default travel is from 98ó to 2012us. In quads we use 1000-2000 us width. Can the default limits in the taranis be changed to be all in the 1000-2000 range? Thanks.

By the way, how can I use the taranis m9 gimbal in my 9x? It says it has 3.3v and I presume the 9x is a 5v board?

Oh sorry, it's a 9x with atmega128.

It's not in my radio(the hardware menu yes, but not the deadband one) . Version 1.784 Mike er9x-pr822.

Hi Mike. Im having that issues with the center of the gimbal, but can't find that option in my radio. Where is it?
Thanks.

Hi again Mike, sorry to bother you, again. I was seeing the telemetry more detailed, and I could see an A1, A2, and the RSSI values, GVAR, etc, but they are not in the DataID table from the FrSky protocol. How does that work? Is that table incomplete? What if I write a dataID which is not in the tab...

Excellent Mike. I will make a module, passing to the TGY 9X the telemetry data and receiving from the tgy the controls data via PPM. Is the TGY, in the FRHub telemetry mode, sending some data via the serial port?

Mike, If I now want to send all data, even the PPM data over the serial port, can I do that?

Problem solved. 9600 bps. Thanks a lot!!! Works flawlessly.

Hi Mike, I'm sending this message through the serial port via the Arduino: 0x5E 0x06 0x18 0x34 0x5E every 200ms. What is the baud rate I need?
Thanks

Thanks a lot Mike! I'll test it rightnow!

Mike. I'm currently using the original tx and rx module, so, PPM protocol. What telemetry protocol that use? Can I use other protocol with that module? I think that I should use the original module and a custom telemetry to check the reliability of my DIY link before making a full module conversion....

MikeB, the only protocol that can I use is the DJT protocol? Cant I use the frsky v2 protocol, or another in the er9x?

Hi MikeB. I have the revision 820, this hex: http://www.er9x.com/er9x-128.hex . I can't find the "Usr Proto" or the "FrHub" options. Do you think I need another version?
Thanks

HI Mike, thanks for the reply. I didn't write the protocol part yet, becouse I need to know which one can I use. For the arduino, I'm using the UART protocol. I was checking the frsky protocol becouse your firmware accepts it, but I send a string via serial with the arduino to the tx to see if it di...

I assume the mod is done correctly becouse I can program it with the ISP, and are the same wires, right? (rxd0 and txd0 in the atmega128) I am actually trying to display some data im receiving from the airplane in a diy receiver I made with nrf24l01 and an Arduino, and display it in the 9x screen. W...

Hi. I have a Tgy-9x, with atmega128, flashed with er9x. I made the mod for telemetry. I connect a usb-to-ttl adapter in my pc to the rx and tx lines of the atmega, opened EEPE and try to simulate the telemetry. The data are sending, I can see that becouse of the status light in the adapter, but the ...