Search found 404 matches

by ozphoenix
Wed May 22, 2019 9:41 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

@mikeb and @kilrah, An old topic, I know, but I just wanted to confirm that, after similar testing, OpenTX has the same problem dealing with two MLVSS units on the same Rx SPort -- it does not work unless you connect a third (non-MLVSS) unit on the chain -- then it works the same as Ersk9x (oops, so...
by ozphoenix
Tue May 14, 2019 10:52 am
Forum: openTx
Topic: Making calculations on Telemetry Values
Replies: 2
Views: 2462

Re: Making calculations on Telemetry Values

Thanks for your reply, even though you say that it is not a simple thing to do without LUA. Since I have not used LUA and don't feel that I should have to learn to write scripts to do something that is relatively simple in another OS, I guess I'll pass on it for now and hope that this type of calcul...
by ozphoenix
Tue May 14, 2019 10:49 am
Forum: openTx
Topic: Writing Lua Widgets for Horus
Replies: 12
Views: 10785

Re: Writing Lua Widgets for Horus

Thanks for answering my question, over in the other post (even though you have said it probably can't be done easily in OpenTX without using LUA).
by ozphoenix
Tue May 07, 2019 9:05 pm
Forum: openTx
Topic: Making calculations on Telemetry Values
Replies: 2
Views: 2462

Making calculations on Telemetry Values

Newbie to OpenTX 2.2.3, now have it on my FrSky X12S (I have been using Ersk9x on my 9XRPro and my QX7) -- I use MLVSS in my larger planes and have an audio special function to audio/read out flight pack voltage -- that works ok for me. I also use a widget (on FrSKy X12S) to display pack voltage and...
by ozphoenix
Tue May 07, 2019 9:17 am
Forum: openTx
Topic: Writing Lua Widgets for Horus
Replies: 12
Views: 10785

Re: Writing Lua Widgets for Horus

Newbie to OpenTX 2.2.3, now have it on my FrSky X12S (I have been using Ersk9x on my 9XRPro and my QX7) -- I use MLVSS in my larger planes and have an audio special function to audio/read out flight pack voltage -- that works ok for me. I also use a widget (on FrSKy X12S) to display pack voltage and...
by ozphoenix
Thu May 02, 2019 9:52 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

I suspect that, among the many other things that you do for us, this Jumper project might take up a bit of your time right now and, since the X12S seems like it is going to benefit from what you are doing with the Jumper, I'm happy to wait until you have had some more time working with these new dis...
by ozphoenix
Fri Apr 19, 2019 11:41 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Can't help you, I'm sorry - we don't have a winter lay-up where I live :D and I have only just made this conversion recently. Re FrSky X12 Lipo conversion - what is the consensus on 'storage' voltage for it during winter layup etc? I have one I was sent back along, but have yet to dismantle the X12 ...
by ozphoenix
Thu Apr 18, 2019 10:46 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Hmm, ok - guess it's a bit of a stretch to think that FrSky will tell us what they mean - maybe I can find it somewhere around the web - will go looking. I'll still try to give some input about the colour display, but I think that it's good that you're getting another 'guinea pig' unit to work with ...
by ozphoenix
Thu Apr 18, 2019 9:47 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Mike, Regarding SWR - can you tell me how this is calculated in Ersky9x, please? A club mate recently worked on an XJT module for me (see thread on EEPROM replacement to overcome 'beeping' problem) and commented on the SWR readings I was getting on two different antennae (each one received from FrSK...
by ozphoenix
Thu Apr 18, 2019 9:32 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Didn't mean to let the thread go to sleep, but have been busy with family travel and (some) flying, but also workshop building. I have also (today) received my LiPo conversion kit for the X12S and have now installed it, with the charger working now - will take a look at how it holds a charge over th...
by ozphoenix
Fri Mar 22, 2019 10:40 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Ah, didn't know about the floating point - thanks. Part of the reason I attached it was to receive any such pointers :) And, I had wondered if I could run these on a PC first but hesitated to ask - thanks for that detail, it'll help. Have shutdown my laptop for tonight but I'll continue to fiddle to...
by ozphoenix
Fri Mar 22, 2019 9:38 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

I downloaded the latest X12d test version and tried your script - yes, that's close to what I was meaning - thanks! I say 'close' because I see that this will scroll off the screen by the time I walk back to the pits to view it, but that's probably a next step, I guess. For my next step, I made some...
by ozphoenix
Thu Mar 21, 2019 7:37 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Thanks for this extra work, Mike. I'll spend some time playing with it later today. This morning, weather forecast is prime for nice flying - missed out last Sunday due to weather, so will go this morning and try to have a double dose this week, as forecast for this Sunday is even better than today....
by ozphoenix
Thu Mar 21, 2019 11:09 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Errr, looked through it a bit - reminded me of a bygone era in my early programming life - not difficult, but one which i'm not sure I want to revisit just to see graphs. Think I'll wait a while and see what you come up with, Mike, before I launch back in to this level of involvement :( Haha! I thou...
by ozphoenix
Thu Mar 21, 2019 9:45 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Haha! I thought I did the right thing going (first) to test versions then (second) to released versions and I still couldn't see this stuff - now, I know why! Thanks - will work through it now. regards, ozphoenix Here: https://openrcforums.com/forum/viewtopic.php?f=7&t=10325 . I must put that up...
by ozphoenix
Thu Mar 21, 2019 3:21 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Ok, I've looked at the couple of scripts which are on the Er9x released versions site - can anyone point me to where the full script language set is documented and to where any other 'learning'/support material resides? thanks in advance, ozphoenix Oh, bother -- now it looks like I will finally have...
by ozphoenix
Thu Mar 21, 2019 12:30 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Oh, bother -- now it looks like I will finally have to go back and re-learn scripting! Haven't done any for years. Oh, well -- nothing ventured, nothing gained - so be it! The graphing, and storage/filtering, could be done using a script already I would think! I may need to add something for the X12...
by ozphoenix
Wed Mar 20, 2019 10:34 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Good start :) Since you're talking about telemetry -- one concept I have been mulling, given that most X10S/X12S users would be using a Tx module protocol which would support it (as opposed to, say, DJT) is a (slightly-averaged) graph of RSSI. I know we can log this to a telemetry log and then revie...
by ozphoenix
Wed Mar 20, 2019 11:04 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

No doubt at all - model name appearance and location remains as is. I do agree with you.. Model picture, should probably only show in one screen. But I think model name should show always.. In my opinion, we always need a little confirmation of what model we have loaded.. Extra safety for people tha...
by ozphoenix
Wed Mar 20, 2019 10:28 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Mike, I'm slowly working on a longer post about other suggested/possible enhancements while also being distracted with a 3D printing work area (now set up) but in the interest of getting things started, I'd prefer to make an initial comment about having a static model image on the screen, as this ar...
by ozphoenix
Thu Mar 14, 2019 12:29 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Ok, thanks. I agree - bundling in other people's stuff can lead to unexpected consequences and none of us wants that - let's keep it simple. Thanks for looking into it, but I'm not asking you to spend a lot of time on it - we can do well enough with what we have, if changing it brings too high a cos...
by ozphoenix
Wed Mar 13, 2019 11:54 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Ok, understood - thanks - figured that would be your answer but just wanted to ask, before I start suggesting UI ideas, so that I don't take up your time asking for things which are neither practical nor reasonable, given your need to support other radios which do not have the graphics capabilities ...
by ozphoenix
Wed Mar 13, 2019 10:41 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Mike,
Just curious - is it possible for you to use the same aspect ratio as OpenTX (192x114 png) or FrOS (155x100 jpg) for plane images? That way, icons already produced (for example, on SkyRaccoon) can be used in ErSky9x on the X12S.
Regards,
ozphoenix
by ozphoenix
Mon Mar 11, 2019 11:16 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Installed - scrolling constantly for 60 seconds produced no errors :) We can now move on :) Hi Mike, Ok, thanks - will get it and install it and move on :) Have had to be continually charging mine during the recent testing - so much so that I ordered the LiPo upgrade kit, but it will not even ship f...
by ozphoenix
Mon Mar 11, 2019 11:04 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Hi Mike, Ok, thanks - will get it and install it and move on :) Have had to be continually charging mine during the recent testing - so much so that I ordered the LiPo upgrade kit, but it will not even ship from China until sometime after March 30th, I believe :( Once again, thanks for your sterling...
by ozphoenix
Mon Mar 11, 2019 12:57 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

:D It was what it was and now it is not -- no harm done, all good -- we can move on now -- AFTER you go get some sleep :D regards, ozphoenix :D I have no idea why I had code in that only waited for the background to clear every other pass, look like it was something to do with timing how long the cl...
by ozphoenix
Mon Mar 11, 2019 12:42 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

BINGO! I do believe you have solved it :) Unable to cause a restart, though scrolled for about two minutes - the longest time prior seemed to be about 30 seconds or less. And, so far, no occurrence of screen 'snow lines' - not sure if it was related, but that one only appeared infrequently and not o...
by ozphoenix
Sun Mar 10, 2019 11:16 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Hi Mike! That sounds hopeful - if that is the case, I'm glad you could find it before a lot of X12S move on to Ersky9x. I'm away from my house for about an hour - I'll try the new version as soon as I return and report. Does the new version have any remaining debug code in it that will report anythi...
by ozphoenix
Sun Mar 10, 2019 8:11 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

Hi Mike, Three consecutive fails enclosed and attached - each one similar - flashed to blue/grey screen and restart, during scrolling. Regards, ozphoenix New test version with some more tracing added, and the stack dumped to the pos.txt file as well. I feel we are (slowly) homing in on the problem. ...
by ozphoenix
Sun Mar 10, 2019 11:49 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960917

Re: ERSKY9X Coding

No -- both my wife's eyes and mine believe that the 'grey' of the 'flash once' screen is more 'blue' (like my selected background colour -- red:0, Green:15, Blue: 30) than the steady grey of the status line - if you can guess what we mean. BTW - and, only as a reminder - sometimes the screen that 'f...

Go to advanced search