openrcforums

I don't actually know where that setting is. I didn't change it knowingly. unknowingly is another story.

log captured with build ersky9xProvR221f5

Well, after a thousand diversions, I think I'll be able to try this again soon.
(Mavlink via crsf)
If there's a specific version I should use (that's not obvious), let me know.
John

I'm using crsf to provide the mavlink and control. (No separate radio modem) I had a dragonlink system set up the same way, the telemetry was displaying on the 9xr. I decided to switch to the crossfire to see how it compared. So I have it set up the same way, the only change on the 9xr is I selected...

@mikeb
I'm using mavlink, I don't think I mentioned that.
All telemetry values remain zero.
Using test version from May 23.

I enabled "raw logging" which I'm assuming dumps all the data to the SD card.
Should I post that file?
Thank you,
John

Yes it is. I will check the second number. From my previous post "One of the status pages on the 9xr, I think it's "telemetry," shows data RX and the 16-bit value (that's displayed in hex) is updating rapidly.. so, i just assume it's receiving data over com1. (I didn't spend much more...

Please I didn't mean that in a "need it now hurry up" kind of way . It should be the lowest priority as far as it concerns my needs. I just wanted to emphasize my desire to help in any manner I'm able. Is there some software/hardware setup available (or maybe not too difficult to develop) ...

I'll have a look over the next week or two. I'll put something in to start with to receive some telemetry, and post a test version for you to test. I have no crossfire hardware myself. Mike. Mike, would it help you tremendously to have one? I could ship you a set to use. If I could afford to, I'd j...

It has it, yes. Telemetry is to be done

Oh I forgot... I'll be more than happy to try/test anything I can possibly do for you..

And I'm using mavlink from arducopter

I forgot it doesn't subscribe me to threads on this board, so I missed your reply. Yes, the CRSF seems to work just fine, I'm using 12 Channels, I did not try 8 channel mode. I'm not sure about the telemetry as far as CRSF; what I can tell you is the following.. When I switched the 9xr to XFire (sp?...

I decided to try a crossfire. Is everything functional with crsf and r220? It appears to work ok.
Is telemetry still in the works? Could I just connect a BT module in my 9xrpro to connect to the crossfire BT?
Thank you!

I'm not sure why this particular menu item was changed, there seem to be many other places where a user could cause problems. What I was suggesting is that "disabled" is a bit terse. "Disabled for your protection" "Disabled for safety, click help" "Disabled, do xyz...

Suggestion, if something is disabled for whatever reason, instead of displaying "disabled" please tell the user how to enable or why it is disabled. E.g. "Hold down xyz and turn off and on 3.5 times"

Thx