Search found 190 matches

by rcdiy
Sun Jun 03, 2018 3:55 pm
Forum: openTx
Topic: 9xr pro - opentx 2.1 telemetry
Replies: 2
Views: 3093

Re: 9xr pro - opentx 2.1 telemetry

Special functions
Announcements/Play
Each line at the end has an option on when to play the announcements.

When active
Once not at start up
Once
Every x seconds

Check each line and see what they are set to.

http://rcdiy.ca/opentx-transmitter-firm ... functions/
by rcdiy
Sat Jun 02, 2018 5:40 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

Thanks
by rcdiy
Sat Jun 02, 2018 1:40 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

Is this correct. EU build option. eu - Removes D8 and LR12 Frsky protocols that are illegal in Europe after Jan 1st, 2015 Note: For FrSKY transmitters the XJT module also needs to be flashed with its EU firmware to be EU compliant. FrSKY receivers will also need to be flashed with their EU firmware....
by rcdiy
Fri Jun 01, 2018 11:36 pm
Forum: openTx
Topic: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
Replies: 28
Views: 70401

Re: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters

Oops I see I already reported this but they haven't been addressed. How often will you update your documentation. While outstanding in the production/presentation we need them to be correct as well. I'm directing people to your documents from the OpenTX Manual Post sticky on this site and from the R...
by rcdiy
Fri Jun 01, 2018 11:23 pm
Forum: openTx
Topic: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
Replies: 28
Views: 70401

Re: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters

The OpenTX Companion Section 3 Page 15 Lua - Enable the use of LUA scripts. Use of LUA scripts are outside the scope of this guide. Incorrect. Lua - Enables the Lua custom scripts screen. Similar to how noheli removes the heli CCP screen. Lua adds the custom scripts screen. The companion Lua mouse o...
by rcdiy
Fri Jun 01, 2018 2:54 pm
Forum: openTx
Topic: Check hardware compatibility
Replies: 2
Views: 2905

Re: Check hardware compatibility

Sad that they don’t just install the OpenTX project firmware build... instead of a modified version.
by rcdiy
Thu May 31, 2018 10:36 pm
Forum: openTx
Topic: Check hardware compatibility
Replies: 2
Views: 2905

Check hardware compatibility

What are the cases for which we uncheck hardware compatibility?
by rcdiy
Thu May 31, 2018 10:34 pm
Forum: openTx
Topic: Problem with X7S - could this be an OpenTX issue
Replies: 4
Views: 3990

Re: Problem with X7S - could this be an OpenTX issue

I didn’t for my X7. Is this something after the early X7 went out?
by rcdiy
Thu May 31, 2018 6:46 pm
Forum: openTx
Topic: Problem with X7S - could this be an OpenTX issue
Replies: 4
Views: 3990

Re: Problem with X7S - could this be an OpenTX issue

Never uncheck hardware compatibility.
Flash again but check hardware compatibility. If there is a problem lets work through it.
Are you using an x7 companion profile.
by rcdiy
Tue May 29, 2018 7:22 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Are you sure the original file name had noheli? Please try again by doing a fresh download. Also the number of pages depends on two options. Noheli will reduce by one page. Lua will increase by one page. If you select both you still end up with the same number of pages. Lua option is not needed to r...
by rcdiy
Tue May 29, 2018 6:35 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

I’m trying to get you to stop using Companion temporary. Put the firmware file on the sd card. Write the firmware using bootloader. Once we know this works then radio is okay. Try placing the OpenTX firmware file on the sd card In the folder called FIRMWARE Power of tx Pull in horizontal tabs and po...
by rcdiy
Tue May 29, 2018 3:25 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Why are you not doing what I ask? Showing me the same screen shots again is not helpful.
I am trying to help you.
If you would like me to stop let me know. That's okay:)
by rcdiy
Mon May 28, 2018 8:30 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Can you post a screenshot using file explorer the file name of the file you transfered to the sd card and then used the bootloader menu to write firmware?

Using windows file explorer locate the file in the firmware folder and take a screenshot.
by rcdiy
Mon May 28, 2018 1:42 am
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

On write to tx Screen select load and see if you can locate the file with noheli (plus other options selected) in the name.
by rcdiy
Sun May 27, 2018 5:38 am
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Why does his date say 2017-12-17?
by rcdiy
Sat May 26, 2018 7:51 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

I realize you want a solution. I’m trying to offer a workaround:) For the workaround does the file name have noheli in it? Anyone else have ideas on the cause and solution? Can you read models and settings and then write them back? Can you backup the radio/firmware from the radio and then write them...
by rcdiy
Thu May 24, 2018 4:59 pm
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Post the file name here
by rcdiy
Thu May 24, 2018 3:33 am
Forum: openTx
Topic: Firmware not loading to Taranis ?
Replies: 31
Views: 17203

Re: Firmware not loading to Taranis ?

Try placing the OpenTX firmware file on the sd card In the folder called FIRMWARE Power of tx Pull in horizontal tabs and power on Select the update firmware option. The maximum file name length is 32 characters including the dot and extension. If the file name does not display on the screen shorten...
by rcdiy
Tue May 15, 2018 10:56 pm
Forum: openTx
Topic: Timer Count Down Value Change Requires Reboot
Replies: 1
Views: 2292

Timer Count Down Value Change Requires Reboot

I’ve noticed that when the timer count down value is changed say from 6:00 to 3:00 it does not take effect till either a flight reset is done or a power cycle. Is this the correct behaviour or a bug? I fly with two battery sizes. When I changed to the smaller battery I reduced the timer but the coun...
by rcdiy
Sat Apr 28, 2018 1:12 pm
Forum: openTx
Topic: Sport sensor limit
Replies: 2
Views: 2744

Re: Sport sensor limit

Thanks
by rcdiy
Sat Apr 28, 2018 1:53 am
Forum: openTx
Topic: Sport sensor limit
Replies: 2
Views: 2744

Sport sensor limit

Is there a limit to the number of sensors that can be used at the same time? Sport sensors.
by rcdiy
Sun Apr 22, 2018 7:48 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

A line or two about this in the manual could prevent people from toasting their radios.. If I add a hardware section then I will. The manual at RCdiy.ca does not have a hardware section (see table of contents on the home page). There are guides linked to down the side of the web page; Thats were I ...
by rcdiy
Sun Apr 22, 2018 7:16 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

There is a lot of stuff..... Exactly. My goal was an OpenTX manual not a radio manual. As you correctly pointed out there is a lot of stuff people may want to do to their radios so if its not OpenTX I'll probably not include it. There are other more general Transmitter manuals/resources which could...
by rcdiy
Sun Apr 22, 2018 6:54 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

Thanks Mike. In order to reduce the verbosity of the manual I'm sticking as much as possible to OpenTX related content. You suggestion while useful would fall under a Tx modification in my arbitrary opinion :)
by rcdiy
Thu Mar 29, 2018 5:11 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 21
Views: 56940

Re: OpenTX 2.2.x Manual

thebriars0 wrote: Tue Mar 06, 2018 6:52 pm A full downloadable manual is now available in a different section of this forum:

http://openrcforums.com/forum/viewtopic ... 45&t=10905
I've added this to the first post.
by rcdiy
Fri Mar 23, 2018 7:51 pm
Forum: openTx
Topic: Maintenance mode
Replies: 31
Views: 17744

Re: Maintenance mode

I like the idea:) Just thinking for the point of view of documenting this. As a user/documenter with regards to OpenTX" Where would I go to get the boot loader with app option? Is the boot-loader installed by navigating to the download using the SD CARD screen and then long pressing enter? What...
by rcdiy
Thu Mar 08, 2018 5:20 am
Forum: openTx
Topic: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
Replies: 28
Views: 70401

Re: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters

I think I’ll add a note in my documentation explaining not to rely on it and to do our own backups. I may create a GitHub issue. It would be nice to have clarity on expectations of that option.
by rcdiy
Tue Mar 06, 2018 7:32 pm
Forum: openTx
Topic: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
Replies: 28
Views: 70401

Re: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters

Please look at Section 3, page 15 Lua - Enables the use of lua scripts . Lua scripts are always enabled. This option enables the custom scripts screen which in turn enables us to configure mix scripts. Section 3, page 16 Backup folder - The location of where firmware backup files will be stored on t...

Go to advanced search