openrcforums

As a lovely little bonus, when I was fiddling around, I managed to set a fail safe on the motors so if it loses ppm connection the motors stop

Figured it out. The naze32 flight controller was mounted sideways with the mini usb connector 90deg Yaw. This made the flight controller think it was facing the wrong direction. Changed in Cleanflight...NOT Baseflight! For some reason Baseflight is not working and wont save things. It is having some...

Ok so I went on youtube and found that Baseflight has issues. So I used Cleanflight, adjusted the ranges (as you mentioned Kilrah) and then set ANGLE & HORIZON on aux1 for the 3way switch. Another problem now?!!? :x :cry: So I went out for a test flight and it seems seriously wrong? Before I cou...

Hi Kilrah.

I don't fully understand what your asking? Could you please explain in more detail? imagine your trying to teach a monkey

Thanks Mike. That's another thing solved! I've been wondering about Limits for a bit but couldn't find the terminology. Sorry for my lack of understanding. Pretty easy when you know where to look! Got it nicely dialled in now. Now to get Baseflight to SAVE Angle & Horizon on AUX1 and I'm set I t...

Ok getting somewhere now.... I had to bind the transmitter again...and recalibrate the esc's....and make the naze32 flight controller ppm... 1- The good thing is I have now set aux1 as the 3way switch (as you showed me Mike, setting ch5 for sIDx). In Baseflight it recognises the 3way switch as aux1 ...

God damn it!! I read you need to calibrate Accelerometer & Magnometer so I tried to do this. Got confused as the MAG wasn't working. So I reset it. ?Turns out it doesn't have a MAG as its a cheap naze32 board. It only has GYRO & ACCEL. Now the settings are lost, I cant connect to the quad fr...

How do I set the fight controller to respond to these settings?

Thanks Mike.

hhhmmm?

Now when I connect a battery the quad beeps constantly?

I can see that the turnigy responds to the switch in the main screen. But it doesn't respond on baseflight?

If I set channel6 to id0, +id1, +id2 it shows on baseflight that the 3way switch it is aux2??

From a youtube video I think Naze32 has channel 5 mapped to aux1 & channel 6 aux2.

No idea sorry, hence why I'm stuck. All I know is its AETR 1,2,3,4....??

I was trying to use baseflight to program aux1 for a 3 way switch so I could set a stabalise mode and trick mode?

How do I find aux1 or channel 5?

I think its a Naze32 flight controller.

cheers

Cheers mike.

Hi mike,

VERS: V.110-MIKE
DATE: 11.04.2015
TIME: 22:43:42
SVN: ERSKY9X-R217
MOD: REVB-X

Thanks for the swift reply.

Hello people. I'm a complete novice and have very little understanding of this. I purchased a quadcopter second hand with a Turnigy 9xr pro. I also got some goggles and cam and set it all up and spent a lot of money. 2weeks in and I haven't had a single flight :( I'm about to quit. I have no underst...

Hi people. sorry to jump in. How do I make my own thread about this? Thanks.