Search found 74 matches

by mentero
Mon May 20, 2019 5:03 pm
Forum: erskyTx (was ersky9x)
Topic: Ersky9x Bug Reporting
Replies: 236
Views: 39989

Re: Ersky9x Bug Reporting

HI,

Found a couple of lines missing at the right and bottom of the edit curve screen.

Version is 222 19.05.2019 and radio is 9XR.Pro but on a different box, with the inverted screen option checked, so maybe it is only just my radio.

Best,
Miguel
IMG_20190520_184426.jpg
by mentero
Sat Apr 13, 2019 5:37 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro trim buttons repair
Replies: 14
Views: 883

Re: 9XR Pro trim buttons repair

Hi,
pins are diam 1.5mm and 8.0mm long, measured with a caliper.

You can replace with 1.5mm piano wire if you have some lying around.

Miguel
by mentero
Mon Mar 18, 2019 4:40 pm
Forum: erskyTx (was ersky9x)
Topic: Improve Vario on ersky9x/er9x
Replies: 11
Views: 1665

Re: Improve Vario on ersky9x/er9x

Open software at its best.

Thank you, Mike.

Miguel
by mentero
Mon Mar 18, 2019 9:58 am
Forum: erskyTx (was ersky9x)
Topic: Improve Vario on ersky9x/er9x
Replies: 11
Views: 1665

Re: Improve Vario on ersky9x/er9x

Hi, I am resurrecting this thread because I think ersky9x deserves better vario tones. Not sure if other users or Mike agree with that. :D Opentx generates tones very much inspired (I think) by this paper, http://www.wstech.de (go to Variometerkunde). (In German) See here: github issue #670 and here...
by mentero
Thu Mar 14, 2019 2:37 pm
Forum: erskyTx (was ersky9x)
Topic: Throttle scaling/limit
Replies: 9
Views: 379

Re: Throttle scaling/limit

Food for thought in every mixer line. Thanks for the class.

I also never thought about the non linearity of asymmetric dual rates and limits. Anyway, maybe not that noticeable for a throttle channel.(?).

Miguel
by mentero
Thu Mar 14, 2019 11:36 am
Forum: erskyTx (was ersky9x)
Topic: Throttle scaling/limit
Replies: 9
Views: 379

Re: Throttle scaling/limit

ReSt wrote:
Thu Mar 14, 2019 9:48 am
Add the MULTIPY mix to the e.g. throttle channel = channel 3
CH3 100% Thr
* 50% P1 Fix Offset 50 NoTrim !! Multiply

According to the position of P1 your CH3 output will be limited between 0 an 100%

Reinhard
I'm afraid this will not allow to get to -100 to cut throttle.

Miguel
by mentero
Thu Mar 14, 2019 9:00 am
Forum: erskyTx (was ersky9x)
Topic: Throttle scaling/limit
Replies: 9
Views: 379

Re: Throttle scaling/limit

If you use a switch, Dual rates is all you need.

Configure one side of the chosen switch from -100 to +100 and the other from -100 to +80. Done.

Miguel
by mentero
Mon Mar 11, 2019 8:56 am
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR Pro Hang Up intermittently.....
Replies: 34
Views: 1140

Re: Turnigy 9XR Pro Hang Up intermittently.....

Probably too obvious but, have you tried to (carefully) disconnected and reinsert the flat wire that connects the LCD ?

Miguel
by mentero
Fri Mar 08, 2019 12:29 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Yes, that is what I use.

Works perfect, except on the bootloader screen. The "problem" only appears if my eeprom is exported and read by a stock 9xr-pro.

Perfect for inverted flight. :D
Miguel
by mentero
Fri Mar 08, 2019 11:48 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

After several days of flying with the Lemon vario, I have come up to the following setup, that is working for me. If you want to use it as a starting point, this is how: (if you do, your comments will be appreciated) Use ersky9x Version ersky9xProvR222d4 , dated 25-Feb-2019 or newer, found here: htt...
by mentero
Tue Feb 26, 2019 2:26 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

I recorded a short video to show what I am talking about; This is the Lemon receiver with "d4" test release in 9XR-pro with Vspd (no scalers) as a source for vario and 0.250s selected. Sounds confusing to my ears. Choosing 1s filter helps with peace of mind, because there are not so many chirps all ...
by mentero
Mon Feb 25, 2019 4:13 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Thank you Mike, The longer filters clearly improve the stability around zero. Even with that, the correlation of sound and movement when moving the receiver by hand does not seem (to me) very good. I will try to make a video. No time yet to try the new firmware on a plane. Minor problem of "d4". I h...
by mentero
Sat Feb 23, 2019 3:06 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X on Taranis
Replies: 473
Views: 59645

Re: ERSKY9X on Taranis

I really bought the Taranis to experiment on ..I changed the case and upgraded speaker and put M9 Gimbals in it..I was just wondering if I could unsolder the XJT module and install a internal module..No big deal as the external module will do what I need . I Use my pro as my main radio . ERSKY9X is...
by mentero
Sat Feb 02, 2019 12:05 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Well,

thank you Daedalus for your offer to Mike. I am at least as happy as he is. Maybe more. :lol: :lol:

It seems that my arithmetic is out by a factor of 10. Not too bad, I have done worse than that.
by mentero
Fri Feb 01, 2019 8:29 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi, Is it normal that nothing is heard if the Vario source value is less than 26 ? Let me check if I understand this: Vario source can vary from +1024 to -1024. +256 - 256 seems like a reasonable input for Vario source, since the increase of number or beeps per second stops at a value of 200, even i...
by mentero
Sun Jan 27, 2019 9:13 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi, Since the Lemon Telemetry instructions points to this thread, and I have added some confusion :oops:, I want to clarify that setting up telemetry (in my case LM0052) with ersky9x is straightforward if you follow some simple rules; Use at least the release "ersky9xProvR222d3" found on this thread...
by mentero
Sun Jan 27, 2019 8:32 am
Forum: eepSKYe
Topic: Telemetry settings
Replies: 10
Views: 527

Re: Telemetry settings

Hi guys, don't get me wrong. Please note that I am new to telemetry, and I was just surprised that nobody had raised the issue with the Vspd units, that where displayed as Vspd/10. That also made vario beeps quite strange, unless a scaler (Vspdx10) was used. That is solved now. Thanks again. In rela...
by mentero
Sat Jan 26, 2019 10:17 pm
Forum: eepSKYe
Topic: Telemetry settings
Replies: 10
Views: 527

Re: Telemetry settings

Thanks again,

It looks like the number of users of "non Frsky" telemetry with ersky9x is not very large.

Miguel
by mentero
Sat Jan 26, 2019 5:39 pm
Forum: eepSKYe
Topic: Telemetry settings
Replies: 10
Views: 527

Re: Telemetry settings

Telemetry protocol is now stored and displayed, thank you Mike. It is only now that I discover that Vario audio "Base Frequency", "Offset Frequency" and "Volume", are not being downloaded (and/or) displayed by eepsky, thats shows 0,0,Volume independent of the values entered on the radio. Sorry I did...
by mentero
Fri Jan 25, 2019 7:02 pm
Forum: eepSKYe
Topic: Telemetry settings
Replies: 10
Views: 527

Telemetry settings

Hi, this thread is a continuation of a discussion in the Lemon Telemetry thread, since it is not Lemon related. I think. I have been trying to nail the problem that I find with eepskye (Version 423, Aug 14 2018) that refuses to show telemetry protocols other then Frsky Auto or WingShadow How High. N...
by mentero
Thu Jan 24, 2019 5:33 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Oopss, sorry I haven't mentioned, :oops: my display is upside down because my radio has the "brains" of a 9XR-pro (ARUni was no more available at the time.), but is in a different case with better sticks, and the wiring was considerably cleaner with the display upside down. I will follow your sugges...
by mentero
Thu Jan 24, 2019 10:29 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Still no luck with Revision: p423, aug 14 2018.

Miguel
by mentero
Thu Jan 24, 2019 9:22 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi,

Downloaded from your link eepsky "Version p423, May 2018" but same results. (Windows 7)

Can you reproduce the problem? or is it on my side?

Miguel
by mentero
Wed Jan 23, 2019 8:09 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi Mike, thanks again,

ticking the "DSM 'A' as RSSI" option on the telemetry menu did the trick. It shows a full bar and 100% Rx when close enough.

Miguel.
by mentero
Wed Jan 23, 2019 5:42 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi, Thanks Mike for the R222d3 release. Vario numbers are now consistent. Max RSSI for this receiver is 31 in close proximity. Is there anyway to show the RX bar as 100% when this value is 31?. I understand that a scaler can be used to show the Rx RSSI number in a custom screen, but I do not know no...
by mentero
Mon Jan 21, 2019 1:36 pm
Forum: Turnigy 9XR PRO radio
Topic: Rotary encoder
Replies: 10
Views: 396

Re: Rotary encoder

Hi Joao,

I also had the same misbehaviour with my rotary encoder, and I thought I got a faulty unit.
The other day reading this thread I found your RC filter and installed it.
Now the encoder works as it should.

Thank you,
Miguel
by mentero
Tue Dec 18, 2018 8:17 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Hi Mike,

So, decimal is just for display purposes. Easy to understand when explained, thank you.

Back to the Lemon Vario set up.

Miguel
by mentero
Mon Dec 17, 2018 7:02 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

Just to illustrate what I was trying to say, in relation with scalers and units, I have set up three scalers with source on variable Temp (T1=), because Vspd is a variable that has some noise and changes very fast, making photos of the display unclear. All three scalers have been set up with x1 mult...
by mentero
Sun Dec 16, 2018 5:24 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

That was it. No switch was selected. Now I can hear sounds with a scaler x10. Sorry for the fuss. May I suggest to use a "ON" default ?. I do not want to add more confusion, but it seems that changing the number of decimals on the scaler screen also changes the displayed value by a factor of 10.(?) ...
by mentero
Sun Dec 16, 2018 4:10 pm
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2191

Re: Lemon Telemetry with ErSky9x

I have set up a scaler SC2 with elevator stick as the source, divided by 5, no destination, no decimal places. Vario source is set to SC2(in fact it is set to SC2 name "ele"), volume is set at 23, and ele (SC2) is added to the custom telemetry screen. On the telemetry screen, SC2 varies when the ele...

Go to advanced search