Search found 26 matches

by neewbee
Tue Oct 18, 2016 1:56 am
Forum: Hardware
Topic: 9x wont turn on when simulator plugged in
Replies: 1
Views: 1957

9x wont turn on when simulator plugged in

Hi
My 9x wont auto turn on when simulator connector plugged into 9x. Help please?
Any advise?
by neewbee
Thu Aug 04, 2016 12:32 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

All alarm has been cleared.. but still constant beep.
I cant find or read rx voltage? How to setup and show rx voltage ?
by neewbee
Wed Aug 03, 2016 10:33 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Yes will do it lol,

Do you know how to fix constat beep xjt module? Just done check connector. Replace antenna too, flash firmware but still same. First time constant beep appears after bind with x4rsb. After power cycle still same constant beep

Swr 16
by neewbee
Wed Aug 03, 2016 9:59 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Just solved after replace Q2, thanks Jhsa.
by neewbee
Tue Aug 02, 2016 3:29 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Jhsa, In J3 connector, which pin for vcc for mainboard? I just test pin number 4 (from top) is connected to vcc external rf module. Is 0v when switched off. Normal. But pin number 10 (bottom pin) is always supply voltage no matter switched off or on. This pin connected to mainboard via black color c...
by neewbee
Sun Jul 31, 2016 1:57 am
Forum: ersky9xr
Topic: CRSF protocol for TBS Crossfire?
Replies: 225
Views: 187993

Re: CRSF protocol for TBS Crossfire?

Thank you mike
by neewbee
Sat Jul 30, 2016 4:57 pm
Forum: ersky9xr
Topic: CRSF protocol for TBS Crossfire?
Replies: 225
Views: 187993

Re: CRSF protocol for TBS Crossfire?

Any update?

I already buy tbs crossfire too for my 9xr pro.
by neewbee
Fri Jul 29, 2016 10:18 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Jhsa, Do you know D1 diode code ? Anyway you not ask me read volt at Q1 before lol. Ok measured at Q1 (single pin) is 11.52v when switch On. And when switch off 10.50v Q1 measured in ohm no short at all pin D1 is a 3V zener diode (BZX384-B3V0). If it was shorted I think the radio would turn OFF but...
by neewbee
Fri Jul 29, 2016 9:55 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Okay seems, i need buy new Q2 mosfet or equivalent.
Do you thing i need replace Q1 too?
by neewbee
Fri Jul 29, 2016 2:38 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

I wish if someone has rf deck 9xr pro can help measure correct voltage at Q1 and Q2. Lol
by neewbee
Fri Jul 29, 2016 2:27 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Jhsa,
Do you know D1 diode code ?
Anyway you not ask me read volt at Q1 before lol.
Ok measured at Q1 (single pin) is 11.52v when switch On.
And when switch off 10.50v

Q1 measured in ohm no short at all pin
by neewbee
Fri Jul 29, 2016 2:09 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

0.00v at D1 when switched off and same 0.00v at switched on.. weird? Broken diode? Are you sure? Weird.. Please measure again. I think it should be at about 3V when the main switch is ON. Also measure the voltage on both sides of R12. Now remove the battery, and set your multimeter to read ohms. me...
by neewbee
Fri Jul 29, 2016 1:52 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

D pin in at single pin, please look at this manual.
by neewbee
Fri Jul 29, 2016 1:22 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Q2 : D pin when switch off 10.5v and when on 11.62v

Lipo power source : 11.62v
by neewbee
Fri Jul 29, 2016 1:00 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Jhsa, do you know code of D1? Unknown code in my RF deck, i cant read it
by neewbee
Fri Jul 29, 2016 12:36 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

0.00v at D1 when switched off and same 0.00v at switched on.. weird? Broken diode?
by neewbee
Fri Jul 29, 2016 10:13 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Yes 2 conditions : I test without xjt module and with xjt module just ensure when power switched off both condition screen still on. But theres condition with xjt installed power switched off led indicator at xjt is also off (lcd screen still on with text " shutting down) Youre right, seems sus...
by neewbee
Fri Jul 29, 2016 9:53 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Condition now :
I plug xjt into slot, battery inserted screen suddenly turn on (switch power still off).

When i switched on module xjt is light on, when i swicthed power off module also off but screen still show text "shutting down" several times
by neewbee
Fri Jul 29, 2016 9:45 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Stock firmware is ersky9xr r212, yeah after reflash to stock firmwarw still same.. yes module inserted when 9xr pro on
by neewbee
Fri Jul 29, 2016 9:19 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

ersky9xr_rom.bin this one..
by neewbee
Fri Jul 29, 2016 8:50 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

No mod at all, only flashed to ersky9xr, possible defective processor? Which wiring i need check?
by neewbee
Fri Jul 29, 2016 8:32 am
Forum: er9x
Topic: Turnigy 9x ER9x + XJT beep beep beep never stop.
Replies: 3
Views: 5804

Re: Turnigy 9x ER9x + XJT beep beep beep never stop.

My xjt constant beep without receiver.. swr 16. As remember first beep because x4rsb, but after that even without receiver, beep never end
by neewbee
Fri Jul 29, 2016 8:18 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

Re: 9xr pro ersky9xr wont turn off when switched off

Without XJT RF module, my 9xr pro still same wont turn off.
by neewbee
Fri Jul 29, 2016 2:19 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro ersky9xr wont turn off when switched off
Replies: 38
Views: 17745

9xr pro ersky9xr wont turn off when switched off

Hi,
My ersky9xr 9xrpro wont switched off..
https://youtu.be/prDUKHrYGWM

Any advise how to fix this?

Thanks
by neewbee
Fri Jul 22, 2016 2:40 am
Forum: er9x
Topic: Turnigy 9x ER9x + XJT beep beep beep never stop.
Replies: 3
Views: 5804

Turnigy 9x ER9x + XJT beep beep beep never stop.

Hi, how to stop sound alarm from xjt module?
Im using turnigy 9x with er9x frsky.
I just try with different xjt module but same problems

Thanks

Go to advanced search