I am trying to use a ELSR V3 module (ES24TX), I don't see any scripts there that address. Which should I use?
Search found 25 matches
- Sun Dec 24, 2023 1:37 pm
- Forum: ersky9xr
- Topic: Does ELRS module work fully with 9xr pro?
- Replies: 10
- Views: 8581
Re: Does ELRS module work fully with 9xr pro?
- Tue Oct 26, 2021 12:05 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1467681
Re: ERSKYTx (was ersky9x) Questions
The settings for the COM port (1 or 2 and inversion) are in the Telemetry menu. Please check this as I mentioned. Mike Yes Telemetry->"Telem. Com Port" = 1 And Invert = None. Telemetry->"Com2 Func. = Telemetry I am not sure what should be in Telemetry->UsrProto, as I don't see Xfire ...
- Mon Oct 25, 2021 12:01 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1467681
Re: RE: Re: ERSKYTx (was ersky9x) Questions
The telemetry should automatically be set for Crossfire when the protocol is set for Crossfire. You may need to check you have the correct Com port selected (COM1) and that it is not inverted. Then the telemetry should come through. Mike Here is a video of the controller. What am I missing? https:/...
- Tue Oct 19, 2021 1:51 pm
- Forum: openTx
- Topic: How to get voltage telemetry working for ExpressLRS?
- Replies: 0
- Views: 2343
How to get voltage telemetry working for ExpressLRS?
I have my ELRS module working (ES24TX), but can't figure out how to get the telemetry to work. What do I select as telemetry protocol, etc?
Thanks.
Thanks.
- Thu Oct 14, 2021 10:52 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1467681
Re: ERSKYTx (was ersky9x) Questions
Ok so ELRS is working with my receiver. Now the only thing I don't know how to do is setup the telemetry. Really just need signal strength. If I go to model_setup->telemetry, what do I need to set for UsrProto, as I don't see Xfire there?
- Thu Oct 14, 2021 10:07 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1467681
Re: ERSKYTx (was ersky9x) Questions
So I found the newer version of script in official repo, and it does work correctly. https://github.com/ExpressLRS/ExpressLR ... c/ELRS.bas
- Wed Oct 13, 2021 7:13 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1467681
Re: ERSKYTx (was ersky9x) Questions
Hello, I am working to get ELRS (Happy Model) ES24TX working with my 9xr pro. I have flashed the correct opentx test version (erskyTxR223B5.zip), and changed my protocol to Xfire. I downloaded the scripts from https://github.com/spinorkit/ExpressLRS/tree/erskytx-basic , but not sure which is the dif...
- Wed Oct 06, 2021 3:19 pm
- Forum: openTx
- Topic: Will OpenTX work out of the box with 9XR and Express LRS?
- Replies: 2
- Views: 2417
- Wed Oct 06, 2021 3:18 pm
- Forum: er9x
- Topic: Can I get use 9XR and Express LRS?
- Replies: 3
- Views: 7136
Re: Can I get use 9XR and Express LRS?
Oh yeah, actually I have the 9xr pro.
- Wed Oct 06, 2021 1:11 pm
- Forum: er9x
- Topic: Can I get use 9XR and Express LRS?
- Replies: 3
- Views: 7136
Can I get use 9XR and Express LRS?
I am looking to add support for ELRS to my 9xR and found this module ES24TX (https://www.getfpv.com/happymodel-expre ... odule.html) I am currently using probably a few year old version of er9x, but can update. I know lua is not supported, but did see this script: https://github.com/DieHertz/ersky9x...
- Wed Oct 06, 2021 10:06 am
- Forum: openTx
- Topic: Will OpenTX work out of the box with 9XR and Express LRS?
- Replies: 2
- Views: 2417
Will OpenTX work out of the box with 9XR and Express LRS?
I am looking to add support for ELRS to my 9xR and found this module ES24TX (https://www.getfpv.com/happymodel-expre ... odule.html) If I update to latest OpenTX with it work with LUA, and everything?
- Tue Apr 12, 2016 3:06 pm
- Forum: ersky9xr
- Topic: Is it possible to create a bit field so multiple switches can use one channel?
- Replies: 2
- Views: 3155
Is it possible to create a bit field so multiple switches can use one channel?
I have another question, I am limited on the number of aux channels being received due to running a high control rate (2Khz on betaflight/cleanflight). So I was thinking that it seems that since most of the switches are only binary, they could easily be combined into one channel using a bitfield. Is...
- Tue Apr 05, 2016 10:41 pm
- Forum: ersky9xr
- Topic: How to make switch that overrides multiple channels?
- Replies: 1
- Views: 2790
How to make switch that overrides multiple channels?
I want to make a switch that puts the OSD into edit mode. Which is Throttle middle, yaw right, pitch full. How can I make a switch that does this?
Thanks,
CP
Thanks,
CP
- Thu Mar 31, 2016 10:53 am
- Forum: ersky9xr
- Topic: What do I need to do to use SmartPort?
- Replies: 6
- Views: 5362
Re: What do I need to do to use SmartPort?
SOLVED: I had to change com1 settings in telemetry to "Invert Off"
- Thu Mar 31, 2016 10:52 am
- Forum: ersky9xr
- Topic: No teleletry with r218 (9xr Pro) and XJT
- Replies: 11
- Views: 8781
Re: No teleletry with r218 (9xr Pro) and XJT
That did it, thanks.MikeB wrote:In the Telemetry menu, the option "Invert COM 1".
Mike.
- Wed Mar 30, 2016 10:46 am
- Forum: ersky9xr
- Topic: No teleletry with r218 (9xr Pro) and XJT
- Replies: 11
- Views: 8781
Re: No teleletry with r218 (9xr Pro) and XJT
Bit of a guess here, but is your real time clock working? There is an output signal from the RTC that controls inversion of the telemetry input. It is just possible that if you battery for the RTC is flat, this bit is not being configured until you change models. There was a change in r218 that rem...
- Mon Mar 28, 2016 11:23 pm
- Forum: ersky9xr
- Topic: What do I need to do to use SmartPort?
- Replies: 6
- Views: 5362
Re: What do I need to do to use SmartPort?
So I take it back about it being 36. I was going from memory, and now that I check it seems that it is zero. I can see that I am actually connected to receiver though. So for the protocol I have it set to PXX D16, start channel ch1, RxNum=1. I have verified that I am getting at least 14 channels to ...
- Mon Mar 28, 2016 12:24 pm
- Forum: ersky9xr
- Topic: What do I need to do to use SmartPort?
- Replies: 6
- Views: 5362
Re: What do I need to do to use SmartPort?
I have 218jhsa wrote:What version of ersky9x have you installed on the radio?
João
I also have XJT module, and do believe I am getting RSSi thought don't understand value of 36.
- Mon Mar 28, 2016 12:00 pm
- Forum: ersky9xr
- Topic: What do I need to do to use SmartPort?
- Replies: 6
- Views: 5362
What do I need to do to use SmartPort?
Hello, I am running on my quad cleanflight, and a FrSky XSR connected via SmartPort. It seems it is connected correctly, but do not seem to be receiving any data on the radio. On the taranis it looks like you need to have radio discover the sensors, do I need to do something similar for the ersky9xr...
- Tue Mar 22, 2016 11:05 pm
- Forum: ersky9xr
- Topic: How to setup to work with usb simulator interface?
- Replies: 8
- Views: 10057
Re: How to setup to work with usb simulator interface?
That did it. Thanks
Maybe that should be the default to match previous radios?
Maybe that should be the default to match previous radios?
- Tue Mar 22, 2016 4:15 pm
- Forum: ersky9xr
- Topic: How to setup to work with usb simulator interface?
- Replies: 8
- Views: 10057
Re: How to setup to work with usb simulator interface?
PPM, 8ch 300uSec
Open Drain
Plarity POS
1st Chan 1
Open Drain
Plarity POS
1st Chan 1
- Tue Mar 22, 2016 3:35 pm
- Forum: ersky9xr
- Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
- Replies: 40
- Views: 29113
Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Did you ever get this working. Interesting thread.
- Tue Mar 22, 2016 3:07 pm
- Forum: erskyTx (was ersky9x)
- Topic: ErskyTx Test Versions
- Replies: 166
- Views: 344596
Re: Ersky9x Test Versions
Hi All, One very frustrating thing about developing new features on these newsgroups is that threads and stuff get lost. Could I invite everybody to log issues on Github instead? https://github.com/MikeBland/APM_Mavlink_to_FrSky/issues I see that you are starting to use the Releases feature on gith...
- Tue Mar 22, 2016 12:51 pm
- Forum: ersky9xr
- Topic: How to setup to work with usb simulator interface?
- Replies: 8
- Views: 10057
Re: How to setup to work with usb simulator interface?
Yes radio is swithed off, and I plug in trainer cable. Same way I do with 9XR, but it is not working for the 9XR Pro. Any settings I need to do?
- Tue Mar 22, 2016 12:37 am
- Forum: ersky9xr
- Topic: How to setup to work with usb simulator interface?
- Replies: 8
- Views: 10057
How to setup to work with usb simulator interface?
Hello,
I previously had my 9XR setup to use one of the 22-1 usb simulator adapters, and I just got a 9XR pro flashed with latest 218 and unfortunately it doesn't work with cable. It doesn't seem to register anything. What do I need to do in order to fix this?
Thanks
I previously had my 9XR setup to use one of the 22-1 usb simulator adapters, and I just got a 9XR pro flashed with latest 218 and unfortunately it doesn't work with cable. It doesn't seem to register anything. What do I need to do in order to fix this?
Thanks