Search found 25 matches

by DanielGA
Wed Jun 19, 2019 8:37 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Reading HW ESC telemetry
Replies: 6
Views: 2648

Re: Reading HW ESC telemetry

bob195558 wrote:
Tue Jun 18, 2019 2:10 pm
This maybe where DanielGA was trying to send you to:
(viewtopic.php?f=84&t=11911&p=144425&hil ... ct#p144425)
Exactly. Thanks. Link fixed in initial post
by DanielGA
Tue Jun 18, 2019 9:34 am
Forum: erskyTx (was ersky9x)
Topic: Scripts for ersky9x
Replies: 105
Views: 16803

Re: Scripts for ersky9x

I've just completed a script you may run on erskyTx based radios that support sending data over SPort to allow changing the physical ID of FrSky, SPort sensors. This works "over the air". Plug your sensor into the receiver, then run the script. Choose your sensor type, select "ReadId" if the ID is ...
by DanielGA
Fri May 17, 2019 6:30 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Reading HW ESC telemetry
Replies: 6
Views: 2648

Re: Reading HW ESC telemetry

Hi, I've implemented Hobbywing V3/V4/V5 and PWM protocols in an arduino project. Not into the openxsensor project though https://openrcforums.com/forum/viewtopic.php?f=84&t=11911&p=144425&hilit=Hobbywing+V3%2FV4%2FV5+arduino+project#p144425 Castle link protocol will be added soon Not feasible with a...
by DanielGA
Fri May 17, 2019 6:29 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openxsensor reading data from ESC internal telemetry
Replies: 4
Views: 1037

Re: openxsensor reading data from ESC internal telemetry

Hi,

I've implemented Hobbywing V3/V4/V5 and PWM protocols in an arduino project. Not into the openxsensor project though

https://www.openrcforums.com/forum/view ... 84&t=11911

Castle link protocol will be added soon

Cheers,
Daniel
by DanielGA
Mon May 13, 2019 9:22 am
Forum: General RC Electronic Projects and Discussion
Topic: ESC telemetry to Frsky Smartport with Arduino Pro Mini
Replies: 0
Views: 733

ESC telemetry to Frsky Smartport with Arduino Pro Mini

Hi, I've developed a project to send ESC telemetry to Frsky Smartport using an Arduino Pro Mini (3.3v) The input is either ESC serial data or PWM signal For the ESC serial the following protocols are implemented: Hobbywing Platinum V3, Hobbywing Platinum V4 and Hobbywing Flyfun V5. Not feasible with...
by DanielGA
Sun Dec 25, 2016 6:39 pm
Forum: eepSKYe
Topic: eepskye & eepe binaries for linux won't work in ubuntu 16.04 (Xenial Xerux). How to build eepskye & eepe
Replies: 5
Views: 3005

eepskye & eepe binaries for linux won't work in ubuntu 16.04 (Xenial Xerux). How to build eepskye & eepe

Current eepskye & eepe binaries for linux won't work in ubuntu 16.04 (Xenial Xerux) as it has some broken dependencies probably because it was built for Ubuntu 14.04. Missing dependencies are libqt4-gui and libqt4-core as they are not compatible with Ubuntu Xenial. The good new is that eepskye (and ...
by DanielGA
Mon Mar 28, 2016 1:57 pm
Forum: ersky9xr
Topic: Default Warnings - 9XRPro + Ersky9xr + FrSky
Replies: 10
Views: 2417

Re: Default Warnings - 9XRPro + Ersky9xr + FrSky

Yes, it's a bit confusing, sorry... I've r218 (module XJT and receiver X4R in D16 with telemetry working) with: Radio setup->Alarms->Int frsky alarm->Off (this disables internal XJT module alarm, isn't it?) Radio setup->Module Rssi->TxRSSIalrm --- 0, TxRSSIalrm --- 0 (this set internal XJT module au...
by DanielGA
Mon Mar 28, 2016 10:59 am
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm issues

I changed the sd card in the 9xrpro sd port by a faster one to verify where the problem was (no changes on the 9xrpro sd card reader). No problem with this faster sd card in the 9xrpro port. Then I put back the slow sd card in the 9xrpro and added a udev rule to slow down the maximum amount of data ...
by DanielGA
Tue Mar 22, 2016 10:28 am
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

I have been trying to install eepskye on ubuntu. But it seems that it fails to install if eepe is installed. removed eepe and eepskye installed ok.. But now I can't install eepe :( I gives the same error.. João There is a problem with the package trying to overwrite files in /usr/bin/eepefiles (I g...
by DanielGA
Tue Mar 22, 2016 9:47 am
Forum: ersky9xr
Topic: How to setup to work with usb simulator interface?
Replies: 8
Views: 3092

Re: How to setup to work with usb simulator interface?

It does work. I've flashed r218 and there is no problem with any sim (I'm using the jack connection on tx) . Just check that you have mixes for the sticks and buttons on your selected model in the 9xrpro (you might also want to define curves if using helis). Go to the simulator and map channels acco...
by DanielGA
Sun Mar 20, 2016 11:26 am
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Solved. It is needed to mount the ERSKY_9X drive by clicking on it. In ubuntu when an external storage is plugged it is showed in devices list in folder navigation gui, but it is not really mounted. Clicking on it mounts and opens it. So, a newbie mistake again!! I keep learning about eepskye/ersky9...
by DanielGA
Sun Mar 20, 2016 6:42 am
Forum: ersky9xr
Topic: No teleletry with r218 (9xr Pro) and XJT
Replies: 11
Views: 1845

Re: No teleletry with r218 (9xr Pro) and XJT

Totally right!!! It was the date/time that I even didn't bother to setup (sooo stupid me), so the clock was not working at all. I couldn't think of a relation in between. But anyway, this has been a totally newbie mistake. Sorry for messing around with this.

Thanks Mike!! Great support!!
by DanielGA
Sat Mar 19, 2016 5:54 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

I can't recreate the failed flashing as eepskye throws the error 'Tx disk not mounted' when trying to flash
by DanielGA
Sat Mar 19, 2016 5:28 pm
Forum: ersky9xr
Topic: No teleletry with r218 (9xr Pro) and XJT
Replies: 11
Views: 1845

Re: No teleletry with r218 (9xr Pro) and XJT

This applies for r218 and r219:
1. Turn on tx (no telemetry, starting on model with working telemetry with pxx, d16)
2. Long press left to get modelsel screen
3. Press menu and select any model with telemetry. Then I got telemetry again until I turn it on next time and then repeat this process
by DanielGA
Sat Mar 19, 2016 5:14 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Which error gives ubuntu?
by DanielGA
Sat Mar 19, 2016 4:52 pm
Forum: ersky9xr
Topic: No teleletry with r218 (9xr Pro) and XJT
Replies: 11
Views: 1845

Re: No teleletry with r218 (9xr Pro) and XJT

Flashed r219 (svn: ersky9x-pr219). Created a new model. I have telemetry until I switch off. When I switch on again I have to change the model to any other to get telemetry back. Almost ok

Thanks!!
by DanielGA
Sat Mar 19, 2016 4:21 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Ok. Changed the sd card coming with transmitter (4gb, type 6) by a samsung evo 64gb type 1 solved the problem. The issue is that ubuntu is trying to write too fast for the sd card that comes with the transmitter which seems to be very slow Adding a udev rule solves the problem with the default sd ca...
by DanielGA
Sat Mar 19, 2016 2:18 pm
Forum: ersky9xr
Topic: No teleletry with r218 (9xr Pro) and XJT
Replies: 11
Views: 1845

Re: No teleletry with r218 (9x Pro) and XJT

I've tried r219 but no telemetry again. r217 still good
by DanielGA
Sat Mar 19, 2016 2:17 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

That's a good point. I'll try that

I've also installed bootloader 2.0 from r219 and same result. It stops after 6mb more or less. It might be related also on how ubuntu automount the 9xr pro. I'll look at it
by DanielGA
Sat Mar 19, 2016 2:03 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Same problem with bootloader 1.5. It got stuck after 6mb (copying voices folder)
by DanielGA
Sat Mar 19, 2016 1:54 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Ok. I took the risk. Yes, it is the same bin file. Now I've bootloader 1.5 from r217. I'll check with Ubuntu again
by DanielGA
Sat Mar 19, 2016 1:45 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

I'm going to update the bootloader. Sorry, just a newbie question: is the bin file for the bootloader the same as for the firmware from er9x.com? Then turn on with sticks outwards and then flash bootloader, right? ...don't want to brick the Tx
by DanielGA
Sat Mar 19, 2016 1:07 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Re: Ubuntu and 9xr Pro comm problems

Thanks Mike!

Bootloader version is 1.3
by DanielGA
Sat Mar 19, 2016 12:25 pm
Forum: ersky9xr
Topic: Ubuntu and 9xr Pro comm issues
Replies: 19
Views: 2082

Ubuntu and 9xr Pro comm issues

Hi, I've experienced two problems on the 9x pro communicating with Xubuntu 14.4.04 LTS: 1. I tried to flash ersky9xr r218 from eepskye for linux through usb 2 but it didn't upload properly. When I turned it on again I got some dots on the lcd but no more. Flashed again with eepskye for windows and i...
by DanielGA
Sat Mar 19, 2016 12:07 pm
Forum: ersky9xr
Topic: No teleletry with r218 (9xr Pro) and XJT
Replies: 11
Views: 1845

No teleletry with r218 (9xr Pro) and XJT

Hi, This is my first post so congrats to developers for the great job done on ersky9xr. The telemetry is not working properly with ersky9xr_r218. It worked fine few times (around 5 or so) and then no more telemetry. Altough it is working good with r217 through ports com1 (frsky, D16) and com2 (frhub...

Go to advanced search