openrcforums

Yes,I find it.But I don't know how to use this function.

In firmware R223B5 or R223B6, AFHDS2A binding is done immediately. But in firmware R224P13 it takes some time.Field flight operation this morning, , AFHDS2A binding is no problem.Forget the buzzer, that's just my failsafe seeker.

Some parts of the P13R224 firmware still need to be modified.It needs about 5 seconds to detect the bind completing.

Here are the two test videos you want.

Hi Mike,
The bind in R233B5 was working well as the two vedios.

Hi Mike,
The bind in R233B5(with the same settings) was working well but it was not in R224p10 and R224p12.

Hi Mike,
I upgraded firmware R224P12 for TX16S and I found two bugs. For your reference.

Hi Mike,
Thank you for your firmware support about TX16 and TX18.Recently I got a Jumper T18.
Does the firmware of erskyTx for Jumper T16 can be flashed and work well on Jumper T18 ?

Hi Mike,
Well done.The sound including voice and beep has come back.Thanks a lot.

What firmware, openTx and erskyTx, are you flashing (the filenames please)? The openTX is 2.3.10 build in radio.The erskyTX is R223B5 build of TX18S and the file name is "tx18s_rom.bin". Please go to the MODELSETUP|VoiceAudio menu, edit a Voice Alert, go down to the bottom and select the ...

Hi Mike, What is the volume setting? On the main display, there is a volume display on the status bar at the bottom. Is the rectangle empty or (part) filled? It is full(max). I don't have a TX18S. On the RADIO SETUP/AudioHaptic menu, there is a volume setting, 0 is no volume. There may also be a &qu...

Hi Mike, No sound at all, or no voice? No sound,no beep and no voice What is the volume setting in the RADIO SETUP/AudioHaptic menu? Set the Beeper to "Norm" Yes,Set the Beeper to "Norm" Have you put the voice files on the SD card? I download the lastest SDcard.zip from Er9x and ...

Hi Mike,
I got a TX18S and flash ErskyTX.It works well but has a problem that it has no sound.

Hi mmilan,
Not yet.Have no time to do that.

Hi MikeB,
I just had a KingRadio TX18S. It use the same firmware of Jumper T18. Can I use erskyTX for it?

Hi Mike,
I use hardware and change 4 icons again under "Stick Reverse:" same as initial value.And than calibrate again.Two problems solved.I don't understand how and why.Thanks a lot.

I am using mode 1 AETR (throttle on the right).The hardware menu looks a little complicated.Does it have a user manual?

Regarding the switch warning,the highlights are 6 and 0. In the "DiagSwtch" menu all trim move, the "+" value change from 0 to 1. The throttle stick direction and throttle trim are not same direction in screen after I tick " throttle reverse" in radio setup.

Hi Mike,
Thanks a lot. It works now but the throttle direction is reversed and switch warning always exists. The throttle direction can be reversed in radio setup but the trim can't be.Where can I disable the switch warning?

I used all files in eepskye5.zip and replace the last eepskye.exe . Which configuration should I choose in SAM-BA configuration ? I also used the SD Card Contents from Er9x and ErskyTx Home Page.

Hi Mike, Could you summarize the firmware update process of TX16S to ERSKYTX? I just had TX16S but update test version firmware failed.This seems to be difficult for 9XR PRO users.Maybe there is this information on some web page.Do I also need to update the firmware of the Internal MULTI-Module for ...

I am used to using erskyTx , does it support TX16S?

Hi Guys,
I got a Frsky X10s but I used to Er9X. How to install ERSky9x on Frsky X10S?

What kind protocols can it support F/S with JP4 in 1 module?

Hi VVigor,
Try to use ER9x V.822a.The firmware work well in my new 9x.Like MikeB said,using PPM and polarity NEG.

Hi Mike B,
I do as you said before I posted.The problem still exists.

Hi Mike, I bought a new Turnigy 9X and used ER9x V.822a .It binds iA6(without ppm out) ,iA8(with ppm output at extra port) and iA10(with ppm output in ch1 and all 10 channels can be used by pwm) and worked well.Wnen I changed the same module to 9XR PRO used ersky9xr V. R221d2,the iA6 and iA8 work we...

I just tested this I bought one of the new radios myself, and it does indeed work. I flashed the standard "er9x.hex" to the radio, and I had to change the protocol polarity to negative, and then everything is working! Hi moo10032, Can I know what interface you use in ER9x ? PPM or Sreies?...

Hi andre,
That is the PCB of the new Turnigy 9X mainboard from HobbyKing website.Because I do not know the difference between the new version and the old version 9X. I just share and ask for answers. It seems to have a telemtery function in new AFHDS 2A module.