Search found 13 matches

by EvanVH
Fri Feb 17, 2017 11:42 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Looks like it works great Mike. I will run it through it paces this weekend. I cant thank you enough.


Evan
by EvanVH
Fri Feb 17, 2017 1:23 am
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Mike First off I did change the name of the file to the correct name used for the firmware. I hope that was what you intended me to do. I then turned on the radio while holding both horizontal trims inwards the screen goes green and this shows up on the screen. Boot Loader V2.2 Ready ersky9x9XT_rom....
by EvanVH
Thu Feb 16, 2017 7:38 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Yes I am powering on the radio with the trims inwards without the USB cable connected.

Thanks so much Mike
by EvanVH
Wed Feb 15, 2017 7:58 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Mike

Can I by pass the usb cable and just pull the card out of the radio and update the card every time I need to update the firmware ??? I am really lame at this. :roll:

Evan
by EvanVH
Wed Feb 15, 2017 7:22 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

So I did what you requested and nothing. The radio has always listed a STM32 BOOTLOADER in devices when the usb plug is connected with the radio. So the pc is recognizing the radio ? This may have happened after a bootloader update. I dont know if that helps Mike. I am sorry for being such a pain in...
by EvanVH
Tue Feb 14, 2017 5:57 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Hi Mike

Yes I can get into the maintenance mode. The trims buttons also function just fine for trimming the airplane . Thanks for answering.

Evan
by EvanVH
Mon Feb 13, 2017 7:56 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Hi folks. I can't get to the boot loader screen. Trying to do some programming on eePskye and write it to the radio. When I turn the radio on while holding both horizontal trims inwards the screen goes pink for as long as I hold the trim buttons inward. Then after releasing the trim buttons the radi...
by EvanVH
Fri Aug 05, 2016 4:55 pm
Forum: 9Xtreme upgrade board
Topic: Rlink PPM trouble
Replies: 2
Views: 2795

Re: Rlink PPM trouble

Thank you
by EvanVH
Fri Aug 05, 2016 12:08 am
Forum: 9Xtreme upgrade board
Topic: Rlink PPM trouble
Replies: 2
Views: 2795

Rlink PPM trouble

I was looking at the protocol section in general settings and wondering if there was a setting I was miss understanding. I am using Rlink RX in conjunction with a RVOSD V5.1. I am trying to get the RX to work as a PPM RX to no avail. It does work just fine as a PWM RX. Thanks for all of the help.
by EvanVH
Sun Jun 26, 2016 4:10 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

Thank you Mike I am on course. I used my APM cord and it worked fine. I have so many of those cords. I think they multiply at night. I got the correct firmware loaded. It is starting to come back. For you sir I have nothing more than admiration and respect.

Evan
by EvanVH
Fri Jun 24, 2016 11:39 pm
Forum: 9Xtreme upgrade board
Topic: USB bootloader and connecting to eepskye
Replies: 51
Views: 36664

Re: USB bootloader and connecting to eepskye

I hope this is as good of a place to post as any. Lets start with the positive. I really wanted to thank all of you that are involved with this project. Great job. It has turned an inexpensive radio into a radio that can do so much. I never thought I could never afford a radio that can do what this ...
by EvanVH
Sat Jun 18, 2016 2:03 am
Forum: 9Xtreme upgrade board
Topic: Upgrade 3 Position Switch Mod 9Xtreme
Replies: 54
Views: 27569

Re: Upgrade 3 Position Switch Mod 9Xtreme

jhsa wrote:Try this. I think this is what you might be looking for..

http://www.ebay.com/itm/JST-2-0mm-PH-9- ... xyeR9TJaXs

João
Awesome João thank you so much.

Evan
by EvanVH
Thu Jun 16, 2016 2:23 am
Forum: 9Xtreme upgrade board
Topic: Upgrade 3 Position Switch Mod 9Xtreme
Replies: 54
Views: 27569

Re: Upgrade 3 Position Switch Mod 9Xtreme

Hi João, Thank you, this helps a lot. I made this photo showing the wiring connections. 3 Position Switch connections_cc.jpg The old Taranis Gimbals connectors (white plugs) do fit, so I will use them to make the EXT pin connections. Bob B. Hi Bob I am wanting to up grade to a 3 position switch. Bu...

Go to advanced search