Search found 58 matches
- Thu Jul 12, 2018 11:06 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
Hi Mike maybe you can help me. i'm trying to have mavlink telemetry on my 9xrpro. I use a arduino pro mini to convert mavlink to frsky between my apm and orangerx uhf RX. My problem is that when I connect ppm and gnd wires to apm, telemetry disappear on my handset, and if I unplug only gnd, it reapp...
- Tue Jul 10, 2018 11:08 am
- Forum: OpenLRSng hardware
- Topic: telemetry wiring
- Replies: 6
- Views: 10716
Re: telemetry wiring
Yes the 1w tx is powered by handset, i have always do that, never have any problems.
Envoyé de mon SM-A320FL en utilisant Tapatalk
Envoyé de mon SM-A320FL en utilisant Tapatalk
- Tue Jul 10, 2018 11:06 am
- Forum: OpenLRSng hardware
- Topic: telemetry wiring
- Replies: 6
- Views: 10716
Re: telemetry wiring
Yes you are right, ersky9x can do native mavlink telemetry but orangerx must use glitsy branch of openlrsng. With converter I can have frsky rssi/tssi and mavlink telemetry. I don't have a big trust in mavlink rssi [emoji12]. As I have a lot of uhf receiver that use frsky, I would like to use a uniq...
- Tue Jul 10, 2018 9:21 am
- Forum: OpenLRSng hardware
- Topic: telemetry wiring
- Replies: 6
- Views: 10716
Re: telemetry wiring
Thank for responding kilrah, I will try to explain a little bit more. I will send picture a lunch time. Handset: 9xr pro with last ersky9x firmware, ArduP user proto on com1 reversed, auto baudrate. TX module: Orangerx uhf 1w with last openlrsng firmware, set to frsky telemetry with 9600 baudrate. R...
- Mon Jul 09, 2018 6:23 pm
- Forum: OpenLRSng hardware
- Topic: telemetry wiring
- Replies: 6
- Views: 10716
telemetry wiring
Hi guys, i'm trying to have mavlink telemetry on my 9xrpro. I use a arduino pro mini to convert mavlink to frsky between my apm and orangerx uhf RX. My problem is that when I connect ppm and gnd wires to apm, telemetry disappear on my handset, and if I unplug only gnd, it reappear and have no ppm si...
- Wed Jun 13, 2018 10:16 am
- Forum: OpenLRSng
- Topic: Pinmapping
- Replies: 0
- Views: 5774
Pinmapping
hi everyone, i nned a little help with a pinmapping with openlrsng. i would like to use M3 flytron 1W TX as RX and woud like to map the same pin as TX , i made a modification on code but don't know if i'm right: here is the original code for RX operation for Flytron M3 1W TX: #else // RX operation #...
- Sat Jan 07, 2017 12:51 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
ok thanks mike. i tried this one but doesn't work: https://github.com/CzechUavGuy/APM-Mavlink-to-FrSky
- Sat Jan 07, 2017 11:39 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
Hi mike i would like to know if there is any way to convert frsky telemtry to mavlink with a second arduino? Mavlink ==> mavlink to frsky arduino in the plane ==> back to mavlink with second arduino in the handset. If i use direct mavlink protocole (handset and orangerx tx/rx) i have a bad rssi valu...
- Fri Oct 14, 2016 5:37 am
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
Ok thanks joao
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Thu Oct 13, 2016 6:14 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
hi João, i would like to knwow if you have a wiring diagram for the 9xr pro please? i have made some test with a new lm4861 and i can hear more sound but not as expected and with poor quality. i have the same thing with lm386 and ns4150.
- Tue Oct 11, 2016 7:52 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: RE: Re: Adding MAVLINK support
It works [emoji2] http://uploads.tapatalk-cdn.com/20160921/506c2c66a2fe317990faa718e1d311d4.jpg http://uploads.tapatalk-cdn.com/20160921/3b3b586d45ac7f8aaad9990ecf0d0927.jpg Envoyé de mon GT-I8190 en utilisant Tapatalk Hi mike i don't know why but rssi never change and always stay at 100% Thanks Sa...
- Tue Oct 04, 2016 3:45 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
hi mike i saw last week end that Alt and gAlt on the handset are not in meters but decimeters with mavlink.
my RTL mode is set to stand at 100 meters and there was 1000 on the screen.
Sam
my RTL mode is set to stand at 100 meters and there was 1000 on the screen.
Sam
- Wed Sep 21, 2016 6:15 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
It works [emoji2]
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Tue Sep 20, 2016 8:17 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
After some search i found that the rssi on OSD come from RC_CHANNELS_RAW (#35). I found this in the minimosd code.
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Tue Sep 20, 2016 4:48 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
This is what i've found mike. i'm surprised that there is no message received from 109 and 166.
Envoyé de mon GT-I8190 en utilisant Tapatalk- Sat Sep 17, 2016 7:27 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
OK, I've just pushed the sources to Github. They are in the 'next' branch. Mike. Thanks mike. First of all ...WHAT a hard and long work :shock: when i saw the source code, i fall on my ass. I imagine that you had a lot of hours of coding. I believe that is too complicated for me :D . I was searchin...
- Sat Sep 17, 2016 6:34 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
many thanks mike
- Sat Sep 17, 2016 10:56 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
hi mike i would like to know if it's possible to take a look at the code source of the last ersky9xProvR219v. I would like to learn how the code is made and watch the difference between openlrsng mavlink code and ersky9x mavlink code.
thanks
sam
thanks
sam
- Tue Sep 06, 2016 3:14 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
hi mike, still no rssi with the "MavLink RSSI processing test only" firmware. i can see rssi on MP connected by bluetooth but not on handset.
thanks
sam
thanks
sam
- Mon Sep 05, 2016 11:11 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
Hi mike after some test i still have the rssi on my osd but not on my handset. I
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Mon Sep 05, 2016 7:30 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 621427
Re: Adding MAVLINK support
Thanks mike i will try at lunch time
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Thu Sep 01, 2016 11:38 am
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: RE: Re: Upgraded to r218, no sounds/ voice now
Yep, it is from Banggood :) I don't know where you are but mine came from their Europe warehouse. It is quite easy to build, my only advice is to measure all resistors with the multimeter.. instructions are quite good also. But it is not a 200Khz scope as they advertise, unless you just want to see...
- Thu Sep 01, 2016 9:55 am
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: RE: Re: Upgraded to r218, no sounds/ voice now
Nice tool i think i saw it on banggood isn't it?jhsa wrote:As we spoke about scopes a few posts ago.. I have just finished building this
João
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Thu Sep 01, 2016 9:54 am
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
I have checked wat mike said and i have a signal out of pin 5 of U6 and also on pin 4 of U5. So my amp is fried. I think i will put a better one. i have a lm4861m amp at home i think i can use it.
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Thu Sep 01, 2016 6:35 am
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
I will check after lunch what mike says. If the amp is completly fryed i will put a new one.
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Wed Aug 31, 2016 8:55 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
I will DiM with another amp if you know one that can fit in. i'm pretty good with soldering iron. Or maybe you can show me what you have done with your handset?
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Wed Aug 31, 2016 8:11 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
i find 0V on shutdown pin. i think i will replace the amp do you know any other amp that i can replace?
- Wed Aug 31, 2016 6:56 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
thanks i found the datasheet but don't know if the shutdown pin is to high or low level.
- Wed Aug 31, 2016 1:28 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
Thanks João. I made a search on Google to find the amp that is on pcb but without succes. So if you have a datasheet maybe it would be help.
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
- Wed Aug 31, 2016 12:31 pm
- Forum: ersky9xr
- Topic: Upgraded to r218, no sounds/ voice now
- Replies: 63
- Views: 28183
Re: Upgraded to r218, no sounds/ voice now
There is on R41 and C49
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk