Search found 58 matches

by samys13
Thu Jul 12, 2018 11:06 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

Hi Mike maybe you can help me. i'm trying to have mavlink telemetry on my 9xrpro. I use a arduino pro mini to convert mavlink to frsky between my apm and orangerx uhf RX. My problem is that when I connect ppm and gnd wires to apm, telemetry disappear on my handset, and if I unplug only gnd, it reapp...
by samys13
Tue Jul 10, 2018 11:08 am
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 1392

Re: telemetry wiring

Yes the 1w tx is powered by handset, i have always do that, never have any problems.

Envoyé de mon SM-A320FL en utilisant Tapatalk

by samys13
Tue Jul 10, 2018 11:06 am
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 1392

Re: telemetry wiring

Yes you are right, ersky9x can do native mavlink telemetry but orangerx must use glitsy branch of openlrsng. With converter I can have frsky rssi/tssi and mavlink telemetry. I don't have a big trust in mavlink rssi [emoji12]. As I have a lot of uhf receiver that use frsky, I would like to use a uniq...
by samys13
Tue Jul 10, 2018 9:21 am
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 1392

Re: telemetry wiring

Thank for responding kilrah, I will try to explain a little bit more. I will send picture a lunch time. Handset: 9xr pro with last ersky9x firmware, ArduP user proto on com1 reversed, auto baudrate. TX module: Orangerx uhf 1w with last openlrsng firmware, set to frsky telemetry with 9600 baudrate. R...
by samys13
Mon Jul 09, 2018 6:23 pm
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 1392

telemetry wiring

Hi guys, i'm trying to have mavlink telemetry on my 9xrpro. I use a arduino pro mini to convert mavlink to frsky between my apm and orangerx uhf RX. My problem is that when I connect ppm and gnd wires to apm, telemetry disappear on my handset, and if I unplug only gnd, it reappear and have no ppm si...
by samys13
Wed Jun 13, 2018 10:16 am
Forum: OpenLRSng
Topic: Pinmapping
Replies: 0
Views: 816

Pinmapping

hi everyone, i nned a little help with a pinmapping with openlrsng. i would like to use M3 flytron 1W TX as RX and woud like to map the same pin as TX , i made a modification on code but don't know if i'm right: here is the original code for RX operation for Flytron M3 1W TX: #else // RX operation #...
by samys13
Sat Jan 07, 2017 12:51 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

ok thanks mike. i tried this one but doesn't work: https://github.com/CzechUavGuy/APM-Mavlink-to-FrSky
by samys13
Sat Jan 07, 2017 11:39 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

Hi mike i would like to know if there is any way to convert frsky telemtry to mavlink with a second arduino? Mavlink ==> mavlink to frsky arduino in the plane ==> back to mavlink with second arduino in the handset. If i use direct mavlink protocole (handset and orangerx tx/rx) i have a bad rssi valu...
by samys13
Fri Oct 14, 2016 5:37 am
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

Ok thanks joao

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Thu Oct 13, 2016 6:14 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

hi João, i would like to knwow if you have a wiring diagram for the 9xr pro please? i have made some test with a new lm4861 and i can hear more sound but not as expected and with poor quality. i have the same thing with lm386 and ns4150. :? :roll:
by samys13
Tue Oct 11, 2016 7:52 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: RE: Re: Adding MAVLINK support

It works [emoji2] http://uploads.tapatalk-cdn.com/20160921/506c2c66a2fe317990faa718e1d311d4.jpg http://uploads.tapatalk-cdn.com/20160921/3b3b586d45ac7f8aaad9990ecf0d0927.jpg Envoyé de mon GT-I8190 en utilisant Tapatalk Hi mike i don't know why but rssi never change and always stay at 100% Thanks Sa...
by samys13
Tue Oct 04, 2016 3:45 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

hi mike i saw last week end that Alt and gAlt on the handset are not in meters but decimeters with mavlink.
my RTL mode is set to stand at 100 meters and there was 1000 on the screen.

Sam
by samys13
Wed Sep 21, 2016 6:15 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

It works [emoji2]
ImageImage

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Tue Sep 20, 2016 8:17 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

After some search i found that the rssi on OSD come from RC_CHANNELS_RAW (#35). I found this in the minimosd code.

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Tue Sep 20, 2016 4:48 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

This is what i've found mike. i'm surprised that there is no message received from 109 and 166. :roll:
mavlink rssi. 2png.jpg
Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Sat Sep 17, 2016 7:27 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

OK, I've just pushed the sources to Github. They are in the 'next' branch. Mike. Thanks mike. First of all ...WHAT a hard and long work :shock: when i saw the source code, i fall on my ass. I imagine that you had a lot of hours of coding. I believe that is too complicated for me :D . I was searchin...
by samys13
Sat Sep 17, 2016 6:34 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

many thanks mike
by samys13
Sat Sep 17, 2016 10:56 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

hi mike i would like to know if it's possible to take a look at the code source of the last ersky9xProvR219v. I would like to learn how the code is made and watch the difference between openlrsng mavlink code and ersky9x mavlink code.
thanks
sam
by samys13
Tue Sep 06, 2016 3:14 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

hi mike, still no rssi with the "MavLink RSSI processing test only" firmware. i can see rssi on MP connected by bluetooth but not on handset.
thanks
sam
mavlink rssi.png
by samys13
Mon Sep 05, 2016 11:11 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

Hi mike after some test i still have the rssi on my osd but not on my handset. I Image

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Mon Sep 05, 2016 7:30 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 73574

Re: Adding MAVLINK support

Thanks mike i will try at lunch time

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Thu Sep 01, 2016 11:38 am
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: RE: Re: Upgraded to r218, no sounds/ voice now

Yep, it is from Banggood :) I don't know where you are but mine came from their Europe warehouse. It is quite easy to build, my only advice is to measure all resistors with the multimeter.. instructions are quite good also. But it is not a 200Khz scope as they advertise, unless you just want to see...
by samys13
Thu Sep 01, 2016 9:55 am
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: RE: Re: Upgraded to r218, no sounds/ voice now

jhsa wrote:As we spoke about scopes a few posts ago.. I have just finished building this ;) :)

João

Image
Nice tool i think i saw it on banggood isn't it?

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Thu Sep 01, 2016 9:54 am
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

I have checked wat mike said and i have a signal out of pin 5 of U6 and also on pin 4 of U5. So my amp is fried. I think i will put a better one. i have a lm4861m amp at home i think i can use it.

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Thu Sep 01, 2016 6:35 am
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

I will check after lunch what mike says. If the amp is completly fryed i will put a new one.

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Wed Aug 31, 2016 8:55 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

I will DiM with another amp if you know one that can fit in. i'm pretty good with soldering iron. Or maybe you can show me what you have done with your handset?

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Wed Aug 31, 2016 8:11 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

i find 0V on shutdown pin. i think i will replace the amp ;) do you know any other amp that i can replace?
by samys13
Wed Aug 31, 2016 6:56 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

thanks i found the datasheet but don't know if the shutdown pin is to high or low level.
by samys13
Wed Aug 31, 2016 1:28 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

Thanks João. I made a search on Google to find the amp that is on pcb but without succes. So if you have a datasheet maybe it would be help.

Envoyé de mon GT-I8190 en utilisant Tapatalk
by samys13
Wed Aug 31, 2016 12:31 pm
Forum: ersky9xr
Topic: Upgraded to r218, no sounds/ voice now
Replies: 63
Views: 5742

Re: Upgraded to r218, no sounds/ voice now

There is on R41 and C49

Envoyé de mon GT-I8190 en utilisant Tapatalk

Go to advanced search