Search found 77 matches
- Thu Aug 13, 2020 3:53 pm
- Forum: openTx
- Topic: AFHDS and iBus and OpenTX
- Replies: 1
- Views: 1990
Re: AFHDS and iBus and OpenTX
Any OpenTX radio with either an integrated multi module, or an external one
- Fri Aug 07, 2020 1:46 pm
- Forum: openTx
- Topic: Exclamation mark before switch meaning..
- Replies: 5
- Views: 3419
Re: Exclamation mark before switch meaning..
Well there is no notion of on or off in a 3 pos switch for example...so really !SA- means NOT SA-, which means either SA up or down, but not middle
- Mon Jul 27, 2020 12:41 pm
- Forum: openTx for FrSky radios
- Topic: OpenTx 2.2.4 Companion Issues (QX7)
- Replies: 6
- Views: 5245
Re: OpenTx 2.2.4 Companion Issues (QX7)
Then I guess your radio profile must be set wrong (I'm assuming "load the models from my radio" is actually read model and settings from radio ?)
- Sat Jul 25, 2020 6:44 am
- Forum: Software
- Topic: Widget bar - Convert value % number to text
- Replies: 3
- Views: 3126
Re: Widget bar - Convert value % number to text
You need to write custom widgets for that. You may start from the counter widget which is very simple but has all the required structure and modify it
- Sat Jul 25, 2020 6:33 am
- Forum: openTx for FrSky radios
- Topic: OpenTx 2.2.4 Companion Issues (QX7)
- Replies: 6
- Views: 5245
Re: OpenTx 2.2.4 Companion Issues
You don't even mention your radio type ....
- Tue Jul 07, 2020 6:27 am
- Forum: openTx
- Topic: OpenTX 2.1 released!
- Replies: 156
- Views: 258631
Re: OpenTX 2.1 released!
https://frskytaranis.forumactif.org/t28 ... r-la-radio
In french, but this allow to do it simply using the cell sensor
In french, but this allow to do it simply using the cell sensor
- Tue Jul 07, 2020 5:23 am
- Forum: openTx
- Topic: OpenTX 2.1 released!
- Replies: 156
- Views: 258631
Re: OpenTX 2.1 released!
Not sure why anyone would want to create a per cell sensor, but if you want to do that, yes, thats how you do it
- Mon Jul 06, 2020 5:35 am
- Forum: openTx
- Topic: OpenTX 2.1 released!
- Replies: 156
- Views: 258631
Re: OpenTX 2.1 released!
Have you changed one of the sensors ID with ID changer ? (https://www.youtube.com/watch?v=uOSk-UEpPz0)
- Sat Jun 27, 2020 7:34 am
- Forum: openTx
- Topic: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
- Replies: 7
- Views: 5041
Re: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
I watch your video again and may have found what happens. Your trainer is set to master/CPPM, which is using external bay. You should NOT have been able to select this AND have an extternal module setup. Possibly due to an earlier bug you where able to, but this should not be the case.. So rightfull...
- Fri Jun 26, 2020 7:17 am
- Forum: openTx
- Topic: Help with Trainer-Input (Radiomaster TX16s, but not only)
- Replies: 28
- Views: 17285
Re: Help with Trainer-Input (Radiomaster TX16s, but not only)
There is no SBUS decoding on colorlcd radio currently. The BT space is for an Horus BT module, but that does n't work great. On TX16S, best option is multi trainer
- Thu Jun 25, 2020 7:10 am
- Forum: openTx
- Topic: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
- Replies: 7
- Views: 5041
Re: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
I flashed your firmware, loaded your eeprom, downloaded 2.3.9, flashed 2.3.9, working fine, cannot replicate your issue, even with your eeprom
- Tue Jun 23, 2020 9:06 am
- Forum: openTx
- Topic: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
- Replies: 7
- Views: 5041
Re: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
There is no need for steps in the same major (2.3.x), there is actually no data conversion within a branch. We will have a look at your file
- Mon Jun 22, 2020 1:40 pm
- Forum: openTx
- Topic: Few questions/issues with QX7 configuring logical switches/telemetry
- Replies: 8
- Views: 6442
Re: Few questions/issues with QX7 configuring logical switches/telemetry
The non full range receiver emits at low power, then the Telemetry signal (Trss) received by the radio is low
Use a value widget, and select whateever sensor you want as a source
Use a value widget, and select whateever sensor you want as a source
- Sun Jun 21, 2020 4:55 pm
- Forum: openTx
- Topic: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
- Replies: 7
- Views: 5041
Re: Update from 2.3.1 to 2.3.9 external rf entry deleted or set to off on old saved models
No, first time we hear that. Do you have a backup of your 2.3.1 files ? What radio ?
- Sat Jun 20, 2020 4:02 pm
- Forum: openTx
- Topic: Graupner using multi protocol and external telemetry
- Replies: 6
- Views: 5113
Re: Graupner using multi protocol and external telemetry
You need a HoTT receiver to use HoTT sensors
- Mon Jun 15, 2020 2:44 pm
- Forum: openTx
- Topic: R9M 2019 option unavailable with X10S
- Replies: 8
- Views: 4961
Re: R9M 2019 option unavailable with X10S
This is correct , hardware wise, an x10 non express cannot use a r9m 2019 in access mode
- Fri Jun 12, 2020 5:41 pm
- Forum: openTx
- Topic: Companion2.3.7 no EU option
- Replies: 5
- Views: 3966
Re: Companion2.3.7 no EU option
On previous versions of Companion up to 2.3.5 when selecting the profile for the x9d+ 2019 the option to select/deselect the EU option was available. If a firmware version was created under these versions and the EU option was not selected you could select ACCST D8 and D16 on the TX. This didnt cha...
- Fri Jun 12, 2020 5:37 pm
- Forum: openTx
- Topic: Nirvana nv14 support
- Replies: 13
- Views: 10489
Re: Nirvana nv14 support
Swapping with taranis won’t help, you’ll have to redo the models by hand on nv14.
Support for it is planned in 2.4 as mentioned earlier
Support for it is planned in 2.4 as mentioned earlier
- Wed Jun 10, 2020 6:50 am
- Forum: openTx
- Topic: Flysky as student TX for wireless trainer (multi module)
- Replies: 5
- Views: 4524
Re: Flysky as student TX for wireless trainer (multi module)
I have tried using FlySky protocol with a student t16 in FlySky mode and tx16s as master radio in Fs2A RX mode, working fine here.
- Tue Jun 09, 2020 11:02 am
- Forum: openTx
- Topic: Flysky as student TX for wireless trainer (multi module)
- Replies: 5
- Views: 4524
Re: Flysky as student TX for wireless trainer (multi module)
It should work exactly as the multi FrSky rx. Maybe you should post in rcg multi thread : https://www.rcgroups.com/forums/showthr ... e/page1211 as from an Otx perspective, we do not handle it differently
- Mon Jun 08, 2020 7:02 am
- Forum: openTx
- Topic: [SOLVED] Model Folder Sound Files
- Replies: 5
- Views: 3412
Re: [SOLVED] Model Folder Sound Files
Yes, because the 6pos is the second pot technicaly
- Mon May 11, 2020 5:12 pm
- Forum: openTx for FrSky radios
- Topic: S8R problem but thought someone might know.
- Replies: 2
- Views: 3063
Re: S8R problem but thought someone might know.
You did not do the initial setup where it learn limits (the 3 time ch12 0 to 100), or you did not have the rudder move fully when doing those
- Sun May 10, 2020 6:32 am
- Forum: openTx
- Topic: Ailerons moving slow & with delay
- Replies: 40
- Views: 29058
Re: Ailerons moving slow & with delay
The X9E,with standard pot gimbals, are plaggued with a similar issue because the wire they used on gimbal is too rigid and is over time creating a bad contact between gimbal connector and main board, so yes, it can happen with no hall pot too
- Sun Apr 12, 2020 6:29 am
- Forum: openTx
- Topic: Hot Fixed ID is handled in OpenTX
- Replies: 1
- Views: 1826
Re: Hot Fixed ID is handled in OpenTX
Not sure what you are talking about ...
- Sun Apr 05, 2020 6:33 am
- Forum: openTx for FrSky radios
- Topic: X9E transmitter resets on upgrade to 2.3.7
- Replies: 18
- Views: 10845
Re: X9E transmitter resets on upgrade to 2.3.7
No need, as you tested yourself, it works with nightlies. It has been fixed on 01/04, and will be included in next release?
- Sat Apr 04, 2020 2:02 pm
- Forum: openTx for FrSky radios
- Topic: Which version of opentx to load onto my QX7 Acct?
- Replies: 2
- Views: 2847
Re: Which version of opentx to load onto my QX7 Acct?
Lastest one (2.3.7) should be just fine. In addition to physicaly adding the swityches, you will have to declare those in RADIO/HARDWARE screen
- Fri Apr 03, 2020 10:50 am
- Forum: openTx for FrSky radios
- Topic: X9E transmitter resets on upgrade to 2.3.7
- Replies: 18
- Views: 10845
Re: X9E transmitter resets on upgrade to 2.3.7
Unrelated. Your rtf bat is flat, but this does not create the issue you are experiencing. Have you tried the nighlies?
- Fri Apr 03, 2020 10:28 am
- Forum: openTx for FrSky radios
- Topic: X9E transmitter resets on upgrade to 2.3.7
- Replies: 18
- Views: 10845
Re: X9E transmitter resets on upgrade to 2.3.7
Could you try 2.3.8 nightly ?
- Thu Apr 02, 2020 11:19 am
- Forum: openTx for FrSky radios
- Topic: X9E transmitter resets on upgrade to 2.3.7
- Replies: 18
- Views: 10845
Re: X9E transmitter resets on upgrade to 2.3.7
I cannot replicate on my X9E. Could you : long menu, then long page, it should get you to version screen and take a picture and post it here ?
- Thu Apr 02, 2020 7:03 am
- Forum: openTx
- Topic: Radiomaster TX16s USB-serial
- Replies: 9
- Views: 12479
Re: Radiomaster TX16s USB-serial
Wow sorry I miss read your initial post. There are no two USB serial . There is one USB serial used for flashing, simulator and possibly debug, like most current OpenTX radios. There is also two UART (non usb) accessible at the bottom of the radio (one with rx/tx, one with rx/tx/cts). How access wil...