Search found 10 matches
- Tue May 24, 2016 9:30 am
- Forum: Hardware Mods
- Topic: My cats broke my Turnigy 9x!
- Replies: 1
- Views: 7175
My cats broke my Turnigy 9x!
My cats knocked over my 9x and broke the THR and RUD switch. Thankfully not one that I use... The transmitter would not turn on. Got a switch warning. I opened it up, and cut out the switches. Still getting a switch warning. Any way to boot the transmitter and disable the switches? Right now the swi...
- Thu Mar 17, 2016 10:44 pm
- Forum: 9Xtreme upgrade board
- Topic: 9Xtreme Connecting XJT Module
- Replies: 113
- Views: 71765
Re: 9Xtreme Connecting XJT Module
I have the wires connected like shown, however, they do not produce the RSSI or TSSI. Only when I switch them (reverse) Do I get the RSSI and TSSI. I have my x4r connected properly to my FC (Motolab cyclone) and have it configured properly in betaflight. It works for my other quad using a D4R
- Wed Mar 16, 2016 8:19 pm
- Forum: 9Xtreme upgrade board
- Topic: 9Xtreme Connecting XJT Module
- Replies: 113
- Views: 71765
Re: 9Xtreme Connecting XJT Module
I am trying multiple combinations of the black and white cable.
- Tue Mar 15, 2016 10:38 pm
- Forum: 9Xtreme upgrade board
- Topic: 9Xtreme Connecting XJT Module
- Replies: 113
- Views: 71765
Re: 9Xtreme Connecting XJT Module
I have tried all the combinations of everything in this thread. I get receiver/transmitter numbers when I reverse the wires on what is being talked about on page 1. Maybe my settings inside the controller are off? I am using the same setup that works with the d4r II
- Sun Mar 13, 2016 3:42 pm
- Forum: 9Xtreme upgrade board
- Topic: 9Xtreme Connecting XJT Module
- Replies: 113
- Views: 71765
Re: 9Xtreme Connecting XJT Module
I can get the XJT and X4R to work, and I can fly the quad, but I cannot get telemetry.
- Sat Mar 12, 2016 4:43 am
- Forum: 9Xtreme upgrade board
- Topic: 9Xtreme Connecting XJT Module
- Replies: 113
- Views: 71765
Re: 9Xtreme Connecting XJT Module
Having trouble getting telemetry to work on my new XJT in my 9x with 9xtreme board. I used to have a DJT talking to D4R and everything worked great. I then got a X4R and a XJT to talk to it. I replaced the module, and cannot get telemetry to work for the X4R. I understand the positions of the switch...
- Fri Feb 26, 2016 9:31 pm
- Forum: 9Xtreme upgrade board
- Topic: Calibration drift?
- Replies: 10
- Views: 6240
Re: Calibration drift?
I opened my Turnigy 9x, poked around, hit things, tugged on cables, and gave it a good shake. Seems to have fixed the problem I ordered some frsky gimbals anyways. Is there much benefit to install these gimbals when there is no current issue? Do the benefits out weight the possibility of messing som...
- Mon Feb 15, 2016 12:34 am
- Forum: 9Xtreme upgrade board
- Topic: Calibration drift?
- Replies: 10
- Views: 6240
Calibration drift?
I have had the 9xtreme installed in my 9x for a couple weeks now and have had no problems until recently when my pitch calibration kept getting off. It is the only one that drifts, but it will drift as much as 20 points, causing the quad to flip immediatly. This happens to the real quad and simulato...
- Sat Feb 06, 2016 5:22 am
- Forum: 9Xtreme upgrade board
- Topic: How do I get telemetry?
- Replies: 5
- Views: 4946
Re: How do I get telemetry?
Figured out the next step to get me going. The fact that the 9xtreme black and white wire needs to be attacked to the DJT module via drilling a hole in the case was not well documented or obvious. After doing that (and fixing the screen that I installed crooked) I finally have some telemetry data. N...
- Sat Feb 06, 2016 2:53 am
- Forum: 9Xtreme upgrade board
- Topic: How do I get telemetry?
- Replies: 5
- Views: 4946
How do I get telemetry?
I have the 9xtreme with the latest firmware, in my Turnigy 9x with a frsky DJT. My quad has the D4R-II and a naze32 with betaflight. A wire for the vbat is hooked up to the naze32, and the D4R is sending telemetry with softserial. I am having a very difficult time finding any step by step process to...