Search found 25 matches

by driftology
Thu May 21, 2020 4:11 am
Forum: erskyTx (was ersky9x)
Topic: question about detent pots
Replies: 1
Views: 2407

question about detent pots

quick question, what is the point of the detent option? I have 2 pots without detent and a small joystick for the other 2 inputs. Should the joystick be set as a detent?
by driftology
Wed Nov 06, 2019 5:08 pm
Forum: openTx
Topic: Help initializing LCD on ar9x
Replies: 3
Views: 2585

Re: Help initializing LCD on ar9x

Thanks for the quick reply. I was curious about it after using a friends Taranis Q X7 running inav telemetry. I didn't realize the Q had more ram. Well thanks for the help, I will just keep erskyTx on this radio.
by driftology
Wed Nov 06, 2019 5:04 am
Forum: openTx
Topic: Help initializing LCD on ar9x
Replies: 3
Views: 2585

Help initializing LCD on ar9x

I have a hopefully easy question. I have a custom radio running an ar9x board (aruni). I have been running ersk9x(tx) for some time on it but I have been curious about opentx and the LUA support. As it is currently configured I have it running a ERC12864FSF-2 display instead of the standard -4 displ...
by driftology
Sat May 14, 2016 9:34 pm
Forum: erskyTx (was ersky9x)
Topic: Programming on the fly channel swap?
Replies: 15
Views: 10957

Re: Programming on the fly channel swap?

I really hate that it was that simple lol. Works thanks for the help
by driftology
Sat May 14, 2016 11:03 am
Forum: erskyTx (was ersky9x)
Topic: Programming on the fly channel swap?
Replies: 15
Views: 10957

Re: Programming on the fly channel swap?

Centered if possible. Or no output and the gimbal will self center
by driftology
Sat May 14, 2016 12:40 am
Forum: erskyTx (was ersky9x)
Topic: Programming on the fly channel swap?
Replies: 15
Views: 10957

Programming on the fly channel swap?

Oh ersky9x gods help me. I am wondering if it is possible to have a pot change channel on the fly. I currently have a gimbal that supports 3 modes. I have the IDX 3 position switch set to the different modes. Is it possible for example to have pot1 output to channel 6 when in ID0 and switch to chann...
by driftology
Mon Apr 25, 2016 10:45 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

Thanks Mike! My radio is now complete...for now
by driftology
Mon Apr 25, 2016 8:08 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

works! but resets after next boot
by driftology
Sun Apr 24, 2016 10:35 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

don't have access to my multi meter at the moment but out of curiosity I wired a in an led. the ail pin to ground lights up. gear to ground, nothing, trainer to ground nothing and so on. Don't know if that helps at all.
by driftology
Sun Apr 24, 2016 6:03 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

i used the reset pin to start from scratch and loaded the latest r219. still the same issues. may just be a bad radio
by driftology
Sun Apr 24, 2016 2:39 pm
Forum: Turnigy 9XR PRO radio
Topic: Unbrick 9XR Pro after reseting Atmel chip - How ????
Replies: 31
Views: 19603

Re: Unbrick 9XR Pro after reseting Atmel chip - How ????

Is it possible to install a bootloader without an sd card. I thought the bootloader had to be installed from the radio.
by driftology
Sun Apr 24, 2016 2:36 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

I will try flashing to latest. I should do it to all my radios anyways. I will test the pins when I get a chance. My meter is at work.
by driftology
Sun Apr 24, 2016 3:55 am
Forum: Turnigy 9XR PRO radio
Topic: Unbrick 9XR Pro after reseting Atmel chip - How ????
Replies: 31
Views: 19603

Re: Unbrick 9XR Pro after reseting Atmel chip - How ????

Oh I think I am having the same issue. After unbricking I also went to openTX and lost sd. I tried to go back to ersky9xr but that hasn't helped and now I think I also have the wrong bootloader for the firmware.
by driftology
Sat Apr 23, 2016 10:33 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

pins in the cpu look good. wasn't sure if any of the pins had anything to do with the sd card so I tried to check them all. is it possible to reinstall the bootloader without the sd. I understand how to load the firmware from my desktop.
by driftology
Sat Apr 23, 2016 9:59 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

oh and the strange behavior was the sticks and pots were not staying calibrated and some other things I can't remember. Those issues are gone. I checked all the connections and no dice on the switch. i tried swapping pins with another working switch and go nothing. thanks for the help guys.
by driftology
Sat Apr 23, 2016 9:56 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

SD card stat
present yes
not ready 0003 0000
cid 0000...
csd 0000...
scr 0000...
by driftology
Sat Apr 23, 2016 2:03 am
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Re: Lost SD Card support after a bricking it

I will try that first thing. Need to charge it up. And I hit the reset button after getting some strange behavior from it. Didn't know it would wipe everything lol.
by driftology
Fri Apr 22, 2016 9:34 pm
Forum: Turnigy 9XR PRO radio
Topic: Lost SD Card support after a bricking it
Replies: 15
Views: 7887

Lost SD Card support after a bricking it

I recently bricked one of my 9XR pros, followed the instructions to unbrick and got it back running. It is up and running r217 but I can't get this thing to read any SD cards. I tried a card from another radio and I even tried another break out board and no dice. Usually plugging it into a computer ...
by driftology
Mon Apr 18, 2016 11:01 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

Mike you are the man!
by driftology
Mon Apr 18, 2016 10:22 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

sweet! what does that mean lol
by driftology
Mon Apr 18, 2016 9:54 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro usb3
Replies: 2
Views: 2492

Re: 9xr pro usb3

my surface only has a usb 3 port and it works just fine.
by driftology
Mon Apr 18, 2016 8:59 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

yup, so the screen is mostly black and the back light goes through the text
by driftology
Mon Apr 18, 2016 5:21 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

one more question about the lcd. Is it possible to invert the screen so it would work like a reverse glow lcd?
by driftology
Thu Feb 11, 2016 2:16 pm
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Re: Lcd options

Good info. And thanks. Had the whole thing 3d printed. I even managed to stuff a 3dr radio and bluetooth bridge for the telem
by driftology
Thu Feb 11, 2016 3:56 am
Forum: Turnigy 9XR PRO radio
Topic: Lcd options
Replies: 19
Views: 9636

Lcd options

I have just finished transferring 9xr pro parts into a custom case. I searched around and couldn't find info about lcd's. Is it possible to add an Optrex lcd to the 9xr pro board. I like th idea of a transreflective display. I see there is an option in the setup but assume it could just be there for...

Go to advanced search