Search found 150 matches
- Sun Jan 08, 2017 2:47 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Help with Heli setup
- Replies: 9
- Views: 7095
Re: Help with Heli setup
Thanks Mike, I have 220 already loaded in the ones here I am looking after, I was just making sure that there wasn't a new version out, that's fine.
- Sun Jan 08, 2017 12:56 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Help with Heli setup
- Replies: 9
- Views: 7095
Re: Help with Heli setup
Dropping this query into this thread, as it's probably better than creating a new thread. Is the latest firmware version for the Pro 220 or 221? I've just looked at the er9x site as linked above, and the page says it's 220, and 221 is mentioned above, the file itself is no help in that respect in th...
- Tue Dec 20, 2016 9:35 pm
- Forum: Hardware
- Topic: 9XR Pro interface to use RCflightsim.com Clearview simulator
- Replies: 0
- Views: 1862
9XR Pro interface to use RCflightsim.com Clearview simulator
Have 9XR Pro transmitters using the latest version of the software, and we're wanting to get them working with Clearview Simulator to get our helicopter circuit techniques up to speed. Anyone any experience with making this work, and if you have, what are the options. We're have the option of FRSky ...
- Mon Oct 03, 2016 10:04 pm
- Forum: ersky9xr
- Topic: Heli sim for use with 9XR Pro
- Replies: 1
- Views: 2424
Heli sim for use with 9XR Pro
Ok, so we're making slow progress with the big Bell 212's that are being restored and converted from IC power to electric power, but the next hurdle is proving more challenging, and what we'd like to do is get a suitable sim package that will work with ER9x on the pro, so that we can become more com...
- Sun Oct 02, 2016 9:12 am
- Forum: eePe
- Topic: EEPE and Microsoft Edge, Smart filter blocking download
- Replies: 1
- Views: 6750
EEPE and Microsoft Edge, Smart filter blocking download
Just a heads up for people forced to use Microsoft products, especially Windows 10 and Edge, their wretched smart filter won't allow you to download the EEPE software from the Er9X site, the simplest way round it for now (it worked for me) is to use an alternative browser like Firefox. Edge won't ev...
- Mon Jan 25, 2016 9:59 pm
- Forum: Hardware
- Topic: Search for Replacement 9x Potentiometers!
- Replies: 296
- Views: 201522
Re: Search for Replacement 9x Potentiometers!
Thanks, I've since discovered the HK Daily video about them, and that they can be "teased" into a 9X, which is even more useful. as I have a couple of 9X sets that have to be sorted, sticks bad, and some Sky boards to go into them, so this looks like a useful way to go, as it gets rid of t...
- Mon Jan 25, 2016 8:39 pm
- Forum: Hardware
- Topic: Search for Replacement 9x Potentiometers!
- Replies: 296
- Views: 201522
Re: Search for Replacement 9x Potentiometers!
Slightly away from the direct issues of pots for sticks, but I was browsing Hobbyking last night, and the International warehouse has 3 axis sticks for the 9XR family that are using Hall Effect sensing for the position of the sticks. http://www.hobbyking.com/hobbyking/store/__80303__Quanum_Single_St...
- Thu Aug 20, 2015 8:09 pm
- Forum: ersky9xr
- Topic: Where is the installer for ersky9x
- Replies: 13
- Views: 8027
Re: Where is the installer for ersky9x
The joys of copy-paste. I kept copying the first line down to create the other entries. I must have left one in by mistake. Mike. Thought it might be, happy to be able to help avoid aggravations, I am guessing that you've more than enough to contend with as a result of the Google changes. Best rega...
- Thu Aug 20, 2015 5:21 pm
- Forum: ersky9xr
- Topic: Where is the installer for ersky9x
- Replies: 13
- Views: 8027
Re: Where is the installer for ersky9x
Perfect thanks.MikeB wrote:I've added some download links to the home page.
Mike.
There's one possible query, there seems to be 2 alternatives for the ER9X standard versions, the first line, and the 8th line down. Not an issue for me, but it might save some pain for others.
Cheers
Steve
- Wed Aug 19, 2015 11:54 am
- Forum: ersky9xr
- Topic: Where is the installer for ersky9x
- Replies: 13
- Views: 8027
Re: Where is the installer for ersky9x
Github is holding the source files, release binary files are at http://www.er9x.com/ . I'm still trying to find time to put a better web page up there. The binary files are already there, and the latest revision of eepskye (and eepe) from googlecode already looks for updates from there. Googlecode ...
- Wed Aug 19, 2015 12:28 am
- Forum: ersky9xr
- Topic: XJT, X8R firmware update using 9xrpro
- Replies: 22
- Views: 14506
Re: XJT, X8R firmware update using 9xrpro
Here is the document referenced above: SportFlash.pdf That should give all the info. you need. Use the first diagram, with an external power supply to the device and be sure you use the correct connections. Mike. Thanks for the quick reply, that fills in the gaps, and yes, I should be able to make ...
- Tue Aug 18, 2015 9:06 pm
- Forum: ersky9xr
- Topic: XJT, X8R firmware update using 9xrpro
- Replies: 22
- Views: 14506
Re: XJT, X8R firmware update using 9xrpro
To update the firmware on a SPort device, it must be the only Sport device on the SPort. This means you can only update a receiver or sensor if the XJT module is NOT plugged in. In addition, even the XJT needs to be external as it only looks for a possible firmware update request for a short time a...
- Tue Aug 11, 2015 7:19 pm
- Forum: Hardware
- Topic: 9Xtreme Upgrade Board for 9x Radios
- Replies: 570
- Views: 227635
Re: 9Xtreme Upgrade Board for 9x Radios
Not been in for a while, so this comes as a nice surprise. A leading question, how does the Extreme board compare performance and capability wise with the 9XR-Pro, or the performance of the Sky9x card that we had previously for the 9X. I have all 3 here, in varying numbers, and also now interested i...
- Tue Jun 09, 2015 9:58 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Alternatives to Hobbyking?
- Replies: 12
- Views: 10862
Re: Alternatives to Hobbyking?
Clearly Hobbyking are having some issues with their European courier, SCS, as it's reached the point where the only way to resolve the issue with my order was for HK to issue store credit for the illegal VAT charge. They want me to also take it up with the UK VAT authorities, it will be interesting ...
- Fri Jun 05, 2015 7:12 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: Alternatives to Hobbyking?
- Replies: 12
- Views: 10862
Re: Alternatives to Hobbyking?
Indeed. Ended up spending most of the morning trying to get my HK order out of the hands of SCS, at last, having deployed the nuclear option of a Paypal dispute, I seem to have got their attention, so hopefully, I will have the TX modules that I'm waiting for before too much longer. Time will tell, ...
- Fri Jun 05, 2015 12:57 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: Alternatives to Hobbyking?
- Replies: 12
- Views: 10862
Re: Alternatives to Hobbyking?
I know, and it's worrying that the only supplier of most of the hardware we use is sailing very close to the wind. It would be nice to have an alternative that comes from somewhere other than Hobbyking.
- Fri Jun 05, 2015 9:55 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Alternatives to Hobbyking?
- Replies: 12
- Views: 10862
Re: Alternatives to Hobbyking?
I have tried to get responses from HK, and the courier company, and in the HK forum, and from HK New York, but the response has been deafening silence. The issue is that they are using this courier outfit for some deliveries due to crazy restrictions on some items being shipped, the issue with this ...
- Fri Jun 05, 2015 9:00 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Alternatives to Hobbyking?
- Replies: 12
- Views: 10862
Alternatives to Hobbyking?
Hi Folks, This is close to a rant, but there's a serious side to it as well. Are there any other sources of the Hobbyking hardware that so many of us are using? Reason I ask is that I am about to deploy the nuclear option on an order and put in a Paypal claim on HK, due to an order I placed being re...
- Mon May 25, 2015 9:36 pm
- Forum: ersky9xr
- Topic: Is there a "spare" Analog input on the board
- Replies: 5
- Views: 3861
Re: Is there a "spare" Analog input on the board
jhsa, That's exactly the sort of idea I'm thinking of, having multiple switches that put a specific value into the transmitter, which will then provide a value to the arduino, which it can decode into the relevant on or off values, my thinking was to ignore the 1,2 and 4 bits, so that 8 upwards will...
- Mon May 25, 2015 3:42 pm
- Forum: ersky9xr
- Topic: Is there a "spare" Analog input on the board
- Replies: 5
- Views: 3861
Is there a "spare" Analog input on the board
Is there a spare Analog input on the board that could be used with a switch matrix to send multiple switches across to the receiver. I know we've mentioned this before, but it's starting to raise it's head again, and if there's a spare analog input available, it will save having to lose one of the e...
- Mon Mar 16, 2015 12:54 pm
- Forum: er9x
- Topic: Taranis EEPE. Will it work on a 9XR Pro?
- Replies: 6
- Views: 4596
Re: Taranis EEPE. Will it work on a 9XR Pro?
Thanks Mike, I guess that I was kind of hoping that there was some commonality, as they's suggested in the Openpilot forum that it might, I'll post a correction over there on that to avoid others getting confused. Getting back into things again after a break with other stuff, the Bell 212's are flyi...
- Mon Mar 16, 2015 11:51 am
- Forum: er9x
- Topic: Taranis EEPE. Will it work on a 9XR Pro?
- Replies: 6
- Views: 4596
Taranis EEPE. Will it work on a 9XR Pro?
Been looking at the openpilot CC3D hardware, and there's an EEPE file been posted for the Taranis on ER9X, will that load, enough to make sense, on a 9XR Pro transmitter, I'm hoping to be able to use the combination on one of the (Many) Bell 212's that we're working on, and it will help me get my he...
- Sun Jul 27, 2014 7:44 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: Servo style connector/extension leads
- Replies: 2
- Views: 3859
Servo style connector/extension leads
Hi Guys, Looking for some ideas please, I can get 3 pin servo extension leads from all sorts of places, but I need to make up some 4 pin leads, for a camera on a flymentor, but I'm struggling to find the male pins and headers etc, identical to Futaba style servo, but 4 wire. Anyone know a source of ...
- Wed Jul 23, 2014 8:02 pm
- Forum: ersky9xr
- Topic: Manuals for 9XR Pro
- Replies: 39
- Views: 86339
Re: Manuals for 9XR Pro
Mike, Many thanks for a very rapid reply again, it's appreciated, and I hope I will be in a position to do something to help before too long, no promises, i suspect I will have to do some serious work to get up to speed on this, from the discussions I've seen over time, it's not a simple piece of co...
- Wed Jul 23, 2014 7:35 pm
- Forum: ersky9xr
- Topic: Manuals for 9XR Pro
- Replies: 39
- Views: 86339
Re: Manuals for 9XR Pro
Ok, following this with interest, and just wondering, Could someone post up a list of the software that would be needed from atmel, (and maybe even a list of other essentials) in order to be able to compile and load the source for the Pro series boards. I'm just getting up to speed on all of this, a...
- Mon Jul 21, 2014 10:24 pm
- Forum: ersky9xr
- Topic: Source code library location
- Replies: 4
- Views: 4635
Re: Source code library location
Ok, if it all works on Win 7 64 bit, then that's a pretty good hint for me, I can still get Win 7 from one of my wholesalers, so that's probably a good way to go for now, I've several 17" dual core Acer laptops that I need to do a reball repair on the graphics chip, once they are done, they wil...
- Mon Jul 21, 2014 8:16 pm
- Forum: ersky9xr
- Topic: Source code library location
- Replies: 4
- Views: 4635
Re: Source code library location
Mike, Many thanks for that, I wondered how common the code is between the versions, and that's just given me the answer I needed, in that as well as 2 Pro TX's, I also have 3 Sky boards to put into 9X transmitters, so being able to keep track of what's going on with the different boards has suddenly...
- Sun Jul 20, 2014 8:25 pm
- Forum: ersky9xr
- Topic: Source code library location
- Replies: 4
- Views: 4635
Source code library location
Hi Folks, It's not urgent, but I was looking at the locations for the source code of the different versions earlier, and either I've lost the plot, or there isn't a repository for the 9XR Pro version yet. Is that because we need to use a different version with alternate compile options, or that ther...
- Tue Jul 15, 2014 12:43 am
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro, DJT module, telemetry, what works?
- Replies: 3
- Views: 4709
Re: 9XR Pro, DJT module, telemetry, what works?
Mike, Thanks for the quick response, and the pointer, I'd not noticed that one of the manuals had been updated to reflect the 204 changes. I have had a quick scan of the manuals before this, but didn't get much guidance on the Telemetry side of things, probably because it's an area that is somewhat ...
- Mon Jul 14, 2014 9:30 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro, DJT module, telemetry, what works?
- Replies: 3
- Views: 4709
9XR Pro, DJT module, telemetry, what works?
Hi Folks, Have just finished setting up 2 Pro transmitters, they came with r202, and I've now got both of them running r204 with the updated voice files, and as far as I can tell, they are working, in that if I put servos on the receivers, they are moving with the movement of the sticks, so I've man...