openrcforums

Guy's Ta - Da works like it should!! Can't tell you the # of Hrs I spent working on this. Now the problem, Canada -24C with a wind chill of -31C so flying is out of the question. So I'm running around the house and can only get up to 5 mph, mind you I have to slow down for the corners. I quess that ...

THANK YOU, so much Mike. There is light at the end of the tunnel ! Because my DHT is hard wired into the Pro, there was no room to fit the module into the bay. Was not going to remove the DHT till I get something else working. I have a 5 pin connector that fits the XJT but only connected PPM , + and...

Thank you for your thoughts. Mike, no I don't have Com inverted but its external so I have to use com 2. Bob , I do have the external module but on the 9xr Pro with rssky firmware no option for PXX. as soon as protocol XJT is selected radio voice says " no telemetry ". I do believe it is a...

Gentlemen I have a Pro running ersky 9xr that is driving me crazy! I Emailed Frsky and yes to get S port I need a XJT. You also confirmed this so I got a XJT. My DHT and X6R gave me RX, TX, and RX voltage telemetry. XJT and X6 protocol setting D16 (X) binds fine with X6R and a number of my V8FR-II H...

Thank you for your help.
I have a # of frsky rx's all V8FR - II, so cannot test a telemetry hub.
I'm getting Rx, Tx, receiver voltage, plus the voice warnings that go with these.
For the time being I can live with this.

Darryl

Well I guess one should not believe what HK says.
On that note I would like a answer to one more question, is there any sensors I can plug into X6R telemetry port AD-1 that will show speed and or alt with the DHT module?

Thank you.
Darryl

Hello from Canada,
Hope I can get a answer.

9xr Pro, fw R222c9, DHT telemetry hard wired, getting telemetry for Rx Tx and Rx voltage.
No smart port info (no frsky GPS V2).
Will this combo see the smart port and GPS. If so can you think of a setting I may have missed.
Thank you for your time .
Darryl

Good Day, Show Master. Wow who new hobbypartz.com would sell parts. I think I'm extremely fortunate, when installing back light and ER9x I took all the gimbals apart and used rear window defog epoxy on all eyelets, then lubed them with a drop of scorpion motor oil. (Check other oils with a ohm meter...

Hi Bob B, Thank you for the kind reply, just trying to help out these are great radios! Question on the same subject. Using the non amplified Taranis gimbal on a standard 9X, is the resolution the same because they are not 5K. It would seem to me that they would be the same at both ends, but much mo...

Hi Bob, Sorry for the long link http://www.aliexpress.com/item/1-PCS-B502-B5K-potentiometer-model-aircraft-remote-control-with-60-degrees/32593857162.html?spm=2114.01020208.3.51.68uEvq&ws_ab_test=searchweb201556_2,searchweb201644_5_10001_10002_10005_10006_10003_10004_62,searchweb201560_8,searchw...

9x Potentiometers
Please look at Aliexpress.com At this sight search " B502 B5K 60 degree potentiometer"
These look to identical back plates and will work if carefully replaced, if your wiper is poor you may be able to replace it to.