Search found 11 matches
- Tue Jan 31, 2017 5:41 am
- Forum: Orange DSM Telemetry module
- Topic: Using in 9XR-PRO
- Replies: 84
- Views: 70550
Re: Using in 9XR-PRO
João, Could you please provide me a link to the latest version of the ersky9X manual? Thank you! It was in that 2015 manual that I read about the radio setup hardware screen that mentioned FRSky Mod Done. Ahhhh, you mentioned the "Frsky COM port", not the "Frsky mod done". This i...
- Thu Jan 26, 2017 5:53 pm
- Forum: Orange DSM Telemetry module
- Topic: Using in 9XR-PRO
- Replies: 84
- Views: 70550
Re: Using in 9XR-PRO
In the radio setup screen under "Hardware" is where the manual says it should be, but there is no such option on mine. You are using a really old version of ErSky9x and referring to a very old manual João The only 2 manuals I could find were the ErSky9x Explained for r204 from May 2014 an...
- Thu Jan 26, 2017 4:42 am
- Forum: Orange DSM Telemetry module
- Topic: Using in 9XR-PRO
- Replies: 84
- Views: 70550
Re: Using in 9XR-PRO
Good advice. I updated to the latest ersky9x-r220 and it fixed the binding problem.
Thanks to everyone for the help!
Next I'll work on the actual telemetry.
Thanks again!
Thanks to everyone for the help!
Next I'll work on the actual telemetry.
Thanks again!
- Wed Jan 25, 2017 11:47 pm
- Forum: Orange DSM Telemetry module
- Topic: Using in 9XR-PRO
- Replies: 84
- Views: 70550
Re: Using in 9XR-PRO
Yes, I have the ersky9x-r212 firmware as shipped with the transmitter. In the comments, the fellow in this video says he upgraded his firmware to version 220 and he still has the exact same problem as I. https://www.youtube.com/watch?v=1_2f-ML6gEk In Model Setup page 11, Telemetry2, there is "F...
- Wed Jan 25, 2017 6:46 pm
- Forum: Orange DSM Telemetry module
- Topic: Binding Issue
- Replies: 2
- Views: 7775
Re: Binding Issue
I have replied to your reply in the other post in an effort to keep things more organized. My apologies for the cross posting.
- Wed Jan 25, 2017 6:43 pm
- Forum: Orange DSM Telemetry module
- Topic: Using in 9XR-PRO
- Replies: 84
- Views: 70550
Re: Using in 9XR-PRO
Yes, there is a bind option in the model setup, page 01. When I select it (with the RX in bind mode), the TX says binding, it beeps and the haptic vibrates. Does this over and over, but the RX never stops its fast flashing. I assume this bind is for binding the telemetry back to the TX. I haven't ev...
- Wed Jan 25, 2017 6:20 pm
- Forum: Orange DSM Telemetry module
- Topic: Binding Issue
- Replies: 2
- Views: 7775
Binding Issue
I'm having trouble binding a receiver to an OrangeRX DSM telemetry transmitter module for 9XR Pro. This is the transmitter module: https://hobbyking.com/en_us/orangerx-2-4ghz-telemetry-module-for-turnigy-9xr-pro-dsmx-dsm2-walkera-compatible.html Inserted module into 9XR Pro transmitter with ersky9x-...
- Wed Jan 13, 2016 6:28 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: 9 Channels With One Module on 9XR Pro?
- Replies: 8
- Views: 6569
Re: 9 Channels With One Module on 9XR Pro?
Don't you need a delay time between the channel pulses too? Isn't that the 300uS that's specified in the protocol (PPM 8CH 300uS)? Or am I mixed up here? So for 8 channels: 8 X (2 + .3) = 18.4 plus 4.1 for the sync pulse gave 22.5mS. The PPM16 worked because it was set to "12CH". Probably ...
- Tue Jan 12, 2016 5:20 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: 9 Channels With One Module on 9XR Pro?
- Replies: 8
- Views: 6569
Re: 9 Channels With One Module on 9XR Pro?
I have the OrangeRX DSMX / DSM2 transmitter module. In my tests, I used the same module in both the 9XR and 9XR Pro radios. I thought changing the PPM setting to "12CH" was supposed to allow 12 channels to fit into the standard PPM frame. But is this possible? How long is the frame and how...
- Tue Jan 12, 2016 7:14 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: 9 Channels With One Module on 9XR Pro?
- Replies: 8
- Views: 6569
Re: 9 Channels With One Module on 9XR Pro?
On the old 9XR (non Pro) in the first page of Model Setup, there's a setting for "Proto". There are several choices, the default being: "PPM 8CH 300uS". You can change the 8CH to 10CH or 12CH, but it doesn't make channels 9 and above work. But if you change the protocol to "...
- Mon Jan 11, 2016 7:20 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: 9 Channels With One Module on 9XR Pro?
- Replies: 8
- Views: 6569
9 Channels With One Module on 9XR Pro?
The documentation shows adding a second TX module for transmitting greater than 8 channels with the 9XR Pro. But can it be done with one module? On my old 9XR (non Pro), you could just select 12 channels in the radio setup and it would control all 12 channels of the OrangeRX R1220X recievers. But on...