openrcforums

Thanks Mike. To confirm the 'in built' alarms seem to map to the following locations: Telemetry lost - Automatic (no setting required) BlueTooth connection lost - Automatic (no setting required) Inactivity alarm - Radio Setup > Alarms > Inactivity alarm Tx battery low - Radio Setup > Alarms > Batter...

Latest FW 218

I guess I was looking for a baseline from which to work on setting custom voice alarms.

Don't want to re-invent the wheel and wanted to delineate between radio wide alarms vs per model alarm settings..

I will research further and attempt to answer my own

Apologies if this has been asked/answered elsewhere, I could not find it. I would like to clarify what default warnings are issued by the radio/firmware out of the box (so to speak) so that I know what voice alerts I need to manually configure. I know I could test this myself, but, as an example, it...

I also use samba every day and can't afford to have any issues.

So, my experience is anecdotal, but issues appear to be include permissions and performance.

I probably need to bite the bullet and test on another machine in my environment and see for myself.

I actually do have Xcode (3.2.6) installed, so that's not an issue. Perhaps I will have a crack at compiling it... (Are there any instructions available) The issue that I have/had with later versions of OSX is primarily with SMB/Samba performance, which, I was waiting and hoping would be fixed, but ...

Awesome... I backed it up today and was able to load it up on a windows machine and verify that everything was, as configured in the radio.

Thanks Again Mike.

Is it possible to force a eeprom backup directly from the Radio ? I am on an older mac and do not have the ability to run eepskye to connect to the radio at the moment, so I am doing the SD card shuffle to update FW and backup models etc. I noticed that the SD Card now contains an eeprom folder with...

Thanks Mike... Worked perfectly. FWIW I had read about the required voltage divider adjustment, but for some reason, thought that I would/should at least see some value in RxV, that would indicate that the telemetry was was working before adding the voltage divider adjustment. The fact is RxV showed...

A couple of simple suggestions for future versions of the voice pack. 1. Add a copy of flaps_1.wav as flaps_3.wav in the user folder - which will allow the correct indication of return to flap position 1 from position 2 on a 3 position switch when using BOTH 2. Add a new voice file to the user folde...

Of course... Ding...

Any ideas on why the RxV does not seem to display anything.

From what I read (in the manual) FrSky X8R receivers only have only one analog input, "A1", which is connected internally to measure the voltage of the receiver power supply.

Thanks João,

But, I don't seem to be getting any SWR readings at all ?

I will read the manual.. cheers

I have looked but can't find ANY version of eepskye that works on snow-leopard. Can you suggest where I might find an older compatible version ? Lots of people still use snow-leopard (Many issues with later versions of osx) Do you know what stops the build working for older osx versions ? Is it just...

Hi All, New here, looking for a little help. Spent a couple of days browsing around but can't find answers to a couple of questions. I have a 9XR Pro running ersky9xr_rom_r218 with FrSky XJT/X8R + smartport Voltage sensor. I initially purchased and configured using external cable via futaba port. I ...

Thanks Mike...

Perhaps that Mac maintainer could also advise which minimum version of OSX is required.

I just tried DL version r396 0f eepe.dmg and that does install and work... but unfortunately, there is no version of eepskye.dmg in this or any older revs ..

Mike, I have tried each version back as far as eepskye.dmg r399. (Mar 26, 2014) I can't find anything older.... None of them work on 10.6.8 (Snow Leopard) From the look of the info.plist files the last one was compiled under OSX 10.9 Is there any reason that it cannot be compiled to run on older ver...

Hi Mike,

I can only see the latest version.. (which does not work)

Can you point me to where I can DL some older versions ?

Thanks

Hi,

I have a 9XR-Pro with stock firmware.

I run Mac OSX 10.6.8

Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?

Thanks