Search found 21 matches

by nmyron
Thu Jan 21, 2016 6:52 am
Forum: ersky9xr
Topic: Turnigy 9XR Pro & Orange Rx loses bind when switching Models
Replies: 11
Views: 3738

Re: Turnigy 9XR Pro & Orange Rx loses bind when switching Models

I was just reading through this, and thought I'd kick in my two cents. I don't think it's your receiver. I think it's the module. I wholly agree with Dadealus. I bought the 2015 OrangeRX DSM2/DSMX/Devo switchable unit. It was nothing but heartbreak for me. I spent my first two days with my integrate...
by nmyron
Wed Jan 20, 2016 3:47 pm
Forum: Template Library
Topic: Blade Nano CP S
Replies: 22
Views: 16171

Re: Blade Nano CP S

To flick33, I had the same question, and I worked in a different thread http://openrcforums.com/forum/viewtopic.php?f=123&t=8363 with some of the guys also replying here to get a profile setup. Please find it attached below. If you're still subbed to this thread and haven't figured it out yet, hopef...
by nmyron
Wed Jan 20, 2016 3:16 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

http://i.imgur.com/HMP73LI.png Essentially, if it's like I was seeing and it drifts in Stability mode but in 3D mode the swash is level (indicating no issues with the physical swash adjustments), then you follow the above. If it flies bad in all flight modes, the problem is likely a physical adjust...
by nmyron
Wed Jan 20, 2016 12:04 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Works! Took a little fooling around with the thresholds on CH1. I had to raise the upper limit a point or two at a time until when I started the heli at full throttle, the lights came on as described in the calibration mode (I think I hit like 86 or 87 on the upper limit). Had the same forward/left ...
by nmyron
Tue Jan 19, 2016 10:16 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

It's all really "at my leisure" though... it is a hobby after all, and part of the package is learning how to use the transmitter. You're right, I could rebind it in DSM and emulate a DX-series transmitter. And I've thought about that, but then that means repeated rebinds until I figure out the deal...
by nmyron
Tue Jan 19, 2016 2:58 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

I read through most of this thread pretty fast so pardon me if I missed something. Nmryon it seems that you might not understand what each of the control channels for the helicopter is doing. Channel 1 is the throttle. This simply controls the motor speed. Specktrum radios use curves that go from 0...
by nmyron
Fri Jan 15, 2016 10:42 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Ha! With a little creative sanding to shallow out the box on the back, it connected right up and CH1 works. Now I just have to fix some other things. Rudder doesn't respond correctly and the Stability/Agility/3D mode switch light is backwards (red in stability mode, blue in both other modes). But I'...
by nmyron
Fri Jan 15, 2016 9:59 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

I read through most of this thread pretty fast so pardon me if I missed something. Nmryon it seems that you might not understand what each of the control channels for the helicopter is doing. Channel 1 is the throttle. This simply controls the motor speed. Specktrum radios use curves that go from 0...
by nmyron
Tue Jan 12, 2016 4:44 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

@daedalus - ahhh, roger that... hopes raised, then thwarted... LOL it's not a big deal man. No reply from HK yet, I'll probably order the Spektrum module tonight. I'll think it over, it was $55 with shipping. Sounds like a good deal considering I don't really intend to use Spetrum gear with the exce...
by nmyron
Mon Jan 11, 2016 6:30 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

There is no "bad batch" of 2015 Orange modules. All have been the same for nearly a year now. Please complain in strong terms just to add your voice to the demand for action. Don't expect compensation, as you didn't buy direct from them, but do express your concern. If you can get a Spektrum DM9 mo...
by nmyron
Mon Jan 11, 2016 5:18 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

So, the attached model file is where I finally landed. I believe that once I get a functional module this will work fine. I may need to move the SAFE to ch5. But everything else seems to be functioning properly with the exception of CH1. Throttle response, regardless of what I do to improve it, is e...
by nmyron
Sun Jan 10, 2016 8:15 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Also, to understand another portion better I noticed that the throttle curves are bound to the throttle stick input, on IDx state. So, for flight mode 1 100%Thr ID0 Curve 1 (throttle curve), for flight mode 2 100%Thr on ID1 Curve 2 Then the "pitch curves" (curves 5-7) are bound to their IDx state on...
by nmyron
Sun Jan 10, 2016 7:54 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

I had a look at 'kaos-nano (PPM).eepm'. Did you realize, that throttle (ch1) is at least 50% open (with ID0, even higher with ID1 and ID2) as long as throttle cut is disabled? Therefore I suppose you did bind with throttle cut enabled (ch1 at 0%)? (throttle channel has to be at 0% for arming) Maybe...
by nmyron
Sun Jan 10, 2016 6:58 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

@kaos Tried your flight profile (these are model-settings only files, exported via "Save Model Settings" context menu option, not the entire BIN file from my EEPROM). I tried both the profile you provided, as well as a modified version using PPM as the protocol. Both resulted in erratic channel 1 be...
by nmyron
Sun Jan 10, 2016 6:22 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Found this here in RE to the use of this module with a Taranis controller, and the need to reconfigure the flight profile and some other settings.

http://www.rcgroups.com/forums/showthread.php?t=2376054

Here's an updated eepeSky file with the changes. About to test...
by nmyron
Sun Jan 10, 2016 6:07 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Thanks for all the great replies!!! First off let me open by saying it's great to meet (albeit electronically) all of the persons whose very informative posts I've been reading over the last few months. Since I bought the 9XR Pro, I've been pouring over threads here (trying to determine what modules...
by nmyron
Sun Jan 10, 2016 5:49 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Bah, no joy. Binds, the heli receiver light goes solid as if it's got a connection, but no matter what I do I can't get the throttle to spool up.
by nmyron
Sun Jan 10, 2016 5:28 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Hang on, I think I might have figured some of this out. If Ch5 is flight mode, and we bind each of the fight modes to their Throttle Curves, and ch6 is pitch, and we bind it also to ID0/1/2, and also to it's curves, that sounds right, right? Am I overthinking it now? There is also a 4th and 8th curv...
by nmyron
Sun Jan 10, 2016 4:16 am
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Re: Model Setup Help?

Thanks Mike! I grabbed the manuals earlier today and spent the first half of the day pouring over them. I think what I'm confused on is translating what the Nano wants into what the 9XR-Pro has. Here's what I've loaded up so far. Ch1 is 100% Throttle Ch2 is 100% Aileron Ch3 is 100% Elevator Ch4 is 1...
by nmyron
Sun Jan 10, 2016 3:54 am
Forum: Template Library
Topic: Blade Nano CP S
Replies: 22
Views: 16171

Re: Blade Nano CP S

Any chance someone could upload their working settings for a Nano CP-S? I just got one, I've been trying to configure a flight control profile literally all day, and for the life of me have no idea what I'm doing wrong. A glance at someone's settings config that 'works' would be most helpful. I have...
by nmyron
Sat Jan 09, 2016 11:21 pm
Forum: ersky9xr
Topic: Model Setup Help?
Replies: 45
Views: 12294

Model Setup Help?

Hello all. I'm a new 9XR Pro owner, and just got my first heli to use with it. Prior models have all been cheap RTF units from local hobby stores, all pretty cheaply made/bought and all currently broken. I've gotten about all the joy out of those that I can, so I decided to move on to something more...

Go to advanced search