Search found 18 matches

by Kilo
Fri Apr 12, 2019 5:33 am
Forum: Hardware Mods
Topic: 9x Transistor for buzzer
Replies: 2
Views: 5266

Re: 9x Transistor for buzzer

It's a 8050SS Transistor.

But you'll find it on ebay in Germany:
https://www.ebay.de/itm/222888174274?ul_noapp=true

Datasheet:
http://www.chinesechip.com/chipFile/201 ... 7253-0.pdf
by Kilo
Thu Apr 11, 2019 1:42 pm
Forum: Hardware Mods
Topic: What else can I upgrade in my radio?
Replies: 183
Views: 121335

Re: What else can I upgrade in my radio?

Hey,
of course I had diodes in series with the motor :) didn't draw it on the circuit.
And yes, I've heard about the voice module mod :) But for me it's a bit overkill and I don't need it really. If I would use telemetry then I would think about it :)
by Kilo
Thu Apr 11, 2019 11:29 am
Forum: Hardware Mods
Topic: What else can I upgrade in my radio?
Replies: 183
Views: 121335

Re: What else can I upgrade in my radio?

What I also did is, I put two more toggle switches beside the back pots and connect them with it. So, now I can use the pots like pots or adjust a rate with the pots and use the toggle switches for switching between the 2 conditions 0 and the adjusted pot value. Also two more toggle switches for bac...
by Kilo
Thu Apr 11, 2019 11:17 am
Forum: Hardware Mods
Topic: What else can I upgrade in my radio?
Replies: 183
Views: 121335

Re: What else can I upgrade in my radio?

yes you said this in some thread! :)
As I said, if you using the stock circuit with the transistor, you can replace the buzzer.
by Kilo
Thu Apr 11, 2019 10:02 am
Forum: Hardware Mods
Topic: What else can I upgrade in my radio?
Replies: 183
Views: 121335

Re: What else can I upgrade in my radio?

well, the stock output is driven by a transistor 8050SS with 1W. So, I replaced the stock Buzzer with a speaker and a 10R Resistor without problems!

If you use the stock transistor and their modded circuit for the haptic then a direct replacement of the buzzer would be critical!
by Kilo
Thu Apr 11, 2019 6:26 am
Forum: Hardware Mods
Topic: What else can I upgrade in my radio?
Replies: 183
Views: 121335

Re: What else can I upgrade in my radio?

I made an extra board for the haptic part, consists of a BS170 and some other parts. Works great and strong.
Also changed the 5V regulator for this!
So, I can use the stock circuit for the buzzer and replaced the buzzer with a speaker.
by Kilo
Wed Apr 10, 2019 9:11 pm
Forum: er9x
Topic: Blinking cursor on every screen
Replies: 20
Views: 10519

Re: Blinking cursor on every screen

Ah okay... Thx Mike! Does it includes in the 2015s manual? Or did I miss it? Btw: did you get the issue from my first post about the safety switch page in r821? The gap between the switch and the sound/voice is too big so that I can't read the voice name. It vanish out of the lcd screen and appears ...
by Kilo
Wed Apr 10, 2019 8:23 pm
Forum: er9x
Topic: Blinking cursor on every screen
Replies: 20
Views: 10519

Re: Blinking cursor on every screen

Ha... 😂 Thx Mike... that makes sense. And I thought it would be an issue. 🙄 sorry... But...does it also write the actual mainscreen to the EEPROM? I think, everytime I change the mainscreen and turn off the TX immediately the screen before appears when I turn on. If I wait a time the latest screen a...
by Kilo
Wed Apr 10, 2019 7:33 pm
Forum: er9x
Topic: Blinking cursor on every screen
Replies: 20
Views: 10519

Blinking cursor on every screen

Hey guys, I'm using the er9x Version seen on the photo because this one is the best for me! The latest had some issues on the safety Switch page where the lines are bended, so I can't read the voice names anymore. However... Since the 81x Version I've got some strange Cursor blinkings on the upper l...
by Kilo
Mon Mar 14, 2016 2:26 pm
Forum: er9x
Topic: Er9x and Computer issue
Replies: 7
Views: 4585

Re: Er9x and Computer issue

jhsa wrote:Try this, go to the Model Setup/Protocol menu and change the proto to PPM 4 channels instead of 8 channels. you can also try changing the polarity setting.

João
Baaaam!!
It was the polarity!!!!! Thanks João! Omg...It would never have occurred to me. :shock:
by Kilo
Mon Mar 14, 2016 1:32 pm
Forum: er9x
Topic: Er9x and Computer issue
Replies: 7
Views: 4585

Re: Er9x and Computer issue

yep... right! Also in the System configuration of Windows... no Input is recognized! When I take my 4 chanel Kyosho TX, everything works! And...the Turnigy with original fw works. Ok... again, the whole Story: I bought a turnigy 9x! Made the Trainer mod that I can use the TX without unplugging the h...
by Kilo
Mon Mar 14, 2016 12:25 pm
Forum: er9x
Topic: Er9x and Computer issue
Replies: 7
Views: 4585

Er9x and Computer issue

Hi,
My er9x is no longer recognized by the PC . With the original firmware everything worked . But now I can not even calibrate the stick . The PC does not recognize input . I installed SmartPropoplus but the program always shut down. What can I do?
by Kilo
Mon Jan 11, 2016 7:12 pm
Forum: er9x
Topic: different protocols... for what?
Replies: 4
Views: 3285

Re: different protocols... for what?

:o omg...
Ok... I will buy the V911, then I have to build nothing! :lol:
by Kilo
Mon Jan 11, 2016 7:05 pm
Forum: er9x
Topic: different protocols... for what?
Replies: 4
Views: 3285

Re: different protocols... for what?

Ah ok... thanks.
so I have to plug the china rx 2.4 module to the turnigy??? Or does it works with the turnigy hf?
by Kilo
Mon Jan 11, 2016 6:58 pm
Forum: er9x
Topic: Eeprom issue while trim
Replies: 8
Views: 6051

Re: Eeprom issue while trim

KAL wrote:Have you seen this post?
If you are familiar with soldering iron and xacto knife then this mod should be no big problem.
And it's worth the effort 'cause a reboot during flight is NOT a 'must have'!

Klaus
yeah.. you're right! ;)
I have to think about it!

Thanks a lot for the informations!!!
by Kilo
Mon Jan 11, 2016 6:57 pm
Forum: er9x
Topic: different protocols... for what?
Replies: 4
Views: 3285

different protocols... for what?

Hi everyone, I'm not really familiar with the protocols, so sorry for my question. I'm able to bind the Er9x with my Wltoys V929 Quadrocopter... very nice! But I also have a Jiuchon 9c002 4Ch FP Heli which Looks like a V911 but it's impossible to bind this one... :( Now I found the Option for the pr...
by Kilo
Sat Jan 09, 2016 5:50 pm
Forum: er9x
Topic: Eeprom issue while trim
Replies: 8
Views: 6051

Re: Eeprom issue while trim

Hey, many thanks!!!
Oh... it's a known issue I see... :lol:
puh.. but when I look at the fix mods I have to think about it twice if it's worth to do it.
by Kilo
Sat Jan 09, 2016 4:45 pm
Forum: er9x
Topic: Eeprom issue while trim
Replies: 8
Views: 6051

Eeprom issue while trim

Hey guys... I had some Problems with the original FW. On the main Screen, everytime I use the Aileron trim Buttons, I get an eeprom error and the TX shut down... Then I flashed the Er9x and I'm very happy... But today, same Problem: I click the trim Buttons for aileron and then the TX is blinking an...

Go to advanced search