Search found 23 matches
- Fri Jul 15, 2016 12:09 am
- Forum: Hardware
- Topic: 9xr Pro not power on problem.
- Replies: 27
- Views: 15220
Re: 9xr Pro not power on problem.
Hi guys! I have a spare 9x board, which you think I can get some components there and transfer to the burn components on my 9xr pro? Specifically the C79 as shown above, this is the only component burnt on mine upon inspection.
- Thu Jun 30, 2016 6:25 am
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR Pro Wiring Info Q&A
- Replies: 82
- Views: 153312
Re: 9XR Pro Wiring Info Q&A
C79 on mine is fried, may I know what is it so I can replace it on my own. Thanks!
- Thu Jun 30, 2016 6:19 am
- Forum: Hardware
- Topic: 9xr Pro not power on problem.
- Replies: 27
- Views: 15220
Re: 9xr Pro not power on problem.
Pardon my ignorance but how do you measure "on both sides"?MikeB wrote:With the battery plugged in, test what voltage you see on both sides of FU1 and both sdes of R9. You should see the battery voltage in all cases.
Mike.
- Mon Jun 27, 2016 5:59 am
- Forum: Hardware
- Topic: 9xr Pro not power on problem.
- Replies: 27
- Views: 15220
Re: 9xr Pro not power on problem.
I'm in deep s***. I've just bought this transmitter.Kilrah wrote:You may get short circuits between the module pins and whatever damage that can cause.
- Sun Jun 26, 2016 11:05 am
- Forum: Hardware
- Topic: 9xr Pro not power on problem.
- Replies: 27
- Views: 15220
Re: 9xr Pro not power on problem.
Following this thread, I have same experience -- My C79 is fried as well and R9 reads 0.1. Pardon me kirsch I just have to ask this question to MikeB/Joao what happens when you plugged in the module (Orange RX and XJT) while the TX is on? That is the the last thing I did before this happend and made...
- Sat Apr 30, 2016 11:26 am
- Forum: SMARTIEPARTS PROGRAMMER
- Topic: I fried my board. Any help will be greatly appreciated.
- Replies: 1
- Views: 7322
I fried my board. Any help will be greatly appreciated.
So I got a little over excited this morning when I was on my fpv practice and I plugged in my tx battery the wrong way. I want to repair my board by buying parts available here. Can any one point me to the right direction. Thanks! The frustration this morning when I just flew my first pack! See the ...
- Fri Jan 08, 2016 3:25 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
Soon as I get my repairs done I will test it. Much thanks guys, will update you soon!
- Fri Jan 08, 2016 12:49 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
Maybe the following can work: switches.jpg mixes.jpg Note: the duration of the 1-shot at L4 and L5 must be longer than the delay for CH6 in the mixer. If not, CH6 doesn't send a pulse to activate agility mode. I cannot test it myself, 'cause one motor of my nano QX is suffering ... Klaus Thanks Kla...
- Fri Jan 08, 2016 1:50 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
It does. I think it needs a jerk or something.KAL wrote:Does the nano QX change its color from blue to red when you try to flip?
- Thu Jan 07, 2016 5:55 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
João's or my version? Your version. I'm testing João's version now. what means nothing? No reaction at all or just slipping away in the pointed direction? Yes, exactly! maybe you need to activate that so called agility mode before you move the sticks? If you do it at the same time it might not reco...
- Thu Jan 07, 2016 5:32 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
And so I tested it.. It could be buggy that when I twitch the right stick AIL/ELE too fast, it stays on and does not come back to original, that's fine, I'll just remind myself not to over twitch. However, it seems that it (fc?) doesn't recognize that he is on agility(acro) mode and the quad does no...
- Thu Jan 07, 2016 4:46 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
WOW and OMG!! I never thought it'll be this complicated. I just wanted to flip and self-level! Hahahaha! BUT I am prepared! Thanks for the effort! You guys are the best! Fast reply everywhere! (N.B. There should be a reset/clear all menu somewhere in the Logical Switches page. When you have all the ...
- Thu Jan 07, 2016 3:34 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
Ok let's say your GEAR channel is CH5. First you have to detect the sticks movements using some logical switches. L1 v>|val| Ele 98 (use a bit less than 100%) L2 v>|val| Ail 98 L3 OR L1 L3 ( this means L3 will turn ON if either or both sticks are above 98%.) Use L3 on your GEAR channel CH5 100% FUL...
- Thu Jan 07, 2016 3:31 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
Hi João, a problem would be that the Nano QX is switched between 'agility' and 'stable' by a toggle (momentary) switch (e.g. the trainer switch) on Channel 6. And therefore if the Nano QX misses a switch transition he will get into trouble ... Klaus I put this one on a normal, 1-position switch and...
- Thu Jan 07, 2016 2:46 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
Sorry to confuse you. Basically, what I wanted to do is to toggle a channel ON/OFF when the AIL/ELE sticks are greater/less than x value. I wanted to simulate the stagility mode ( stable + agility mode of my quad) to "cheat" the quad when I make flips. You can only make flips/tricks on thi...
- Thu Jan 07, 2016 1:32 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1349222
Re: ERSKY9x Questions
How do I make the GEA switch turn on when the AIL/ELE is greater than 100? And off again when it goes below 100? I am trying to make a "Stagility" mode in my Nano QX. I can't find any resource thing about it.
- Mon Jan 04, 2016 1:44 pm
- Forum: 9Xtreme upgrade board
- Topic: OK, let's document this!
- Replies: 74
- Views: 35286
Re: OK, let's document this!
Q: Why are my sticks overly sensitive?
A: Because you did not calibrate. Go to Menu > Radio Setup > Calibration. Follow the steps show.
A: Because you did not calibrate. Go to Menu > Radio Setup > Calibration. Follow the steps show.
- Thu Dec 24, 2015 11:43 pm
- Forum: 9Xtreme upgrade board
- Topic: RC Logger Eye One Xtreme
- Replies: 2
- Views: 3304
Re: RC Logger Eye One Xtreme
Let this be my setup log. I am able to bind now. I bought the wrong receiver (PWM) and the RC EOX needs a PPM one. Immersion RC offers this Vortex Spektrum PPM Cable with this I was able to train the EOX the 7-channels it needs. I am just figuring out how to make 5 & 6 channels work properly as ...
- Wed Dec 23, 2015 6:10 pm
- Forum: 9Xtreme upgrade board
- Topic: 9XTREME W/Freerider or Liftoff
- Replies: 111
- Views: 58478
Re: 9XTREME W/Freerider or Liftoff
I did check the graphical ones and it's really hyper sensitive. I did ask around in the Facebook groups that I joined and none of them seem to figure out. Where else to look for answers than here right? Hehehe I'm going to stick with ersky9x and be my first tx firmware of choice. Will not move away ...
- Wed Dec 23, 2015 3:00 pm
- Forum: 9Xtreme upgrade board
- Topic: 9XTREME W/Freerider or Liftoff
- Replies: 111
- Views: 58478
Re: 9XTREME W/Freerider or Liftoff
Try this, go to Radio Setup/Calibrate. Follow the instructions to calibrate sticks and pots.. João THANK YOU VERY MUCH! OMG. Definitely 1:1 feel! This should be added in the documentation or I just didn't pay attention or just too noob that once you have your tx, you should calibrate it before anyt...
- Wed Dec 23, 2015 2:41 pm
- Forum: 9Xtreme upgrade board
- Topic: 9XTREME W/Freerider or Liftoff
- Replies: 111
- Views: 58478
Re: 9XTREME W/Freerider or Liftoff
Aren't there any sensitivity settings on the program itself? João in liftoff there's no way to adjust the sensitivity, never looked in freerider, i thought the sensitivity can be adjusted in my Tx. Here, look at my throttle up by just ~1mm and it's already at 71%. How can my THR be more 1:1? http:/...
- Wed Dec 23, 2015 5:18 am
- Forum: 9Xtreme upgrade board
- Topic: 9XTREME W/Freerider or Liftoff
- Replies: 111
- Views: 58478
Re: 9XTREME W/Freerider or Liftoff
I knew this was possible! I have the 9XT + TH9x and was able to fly with Freerider and Liftoff. But I have a problem with stick's sensitivity. How do i minimize it specially with the throttle. I have tried adjusting the Expo/DR but it seems that it's not what I want.
- Wed Dec 23, 2015 5:12 am
- Forum: 9Xtreme upgrade board
- Topic: RC Logger Eye One Xtreme
- Replies: 2
- Views: 3304
RC Logger Eye One Xtreme
I have the lemonrx receiver and an OrangeRx tx module in a FlySky TH9x. I have recently bought the RCLogger Eye One Xtreme and intend to use the PPM mode so I can use it with my Tx. Anybody with a successful setup?