openrcforums

Hi Kilrah, many thanks for the explanation and that's another one sorted.

really do appreciate your response time and enormous knowledge.

regards

Keith

Hi Kilrah, thanks for the fast response and you have nailed it already. I'm only just getting into Flight Modes and did not realise that the flight mode will call the additional lines in the mixer page, removed the switch setting from the mixer line and it works perfect. I'm actually using the delay...

Hi all, I'm having a real problem with setting up the following configuration: In the mixes I have two lines for throttle: Line 1 is flight mode 0 and curve 1 which is a straight line at +90 Line 2 is flight mode 1 and curve 2 which is a straight line at +51, controlled by SA- In flight mode 1 I hav...

Pleasure David

hey DCSipp, first thing I'd do is to just have the RX, FLVSS and the battery connected, maybe plug one servo into the RX so that you can confirm it's working, then you should definitely see the Cels appear on a "Discover Sensors", if not then I think you have more of a challenge. if it doe...

Hi DCSipp, I'm assuming that you have connected the FLVSS to the smart port of the X8R and then as Kilrah says to the battery balance cable? once you do that and on the TX in the telemetry screen click on Discover sensors, you should see a new sensor "Cels", stop the Discover Sensors, then...

hi dinamich, many thanks for the fast response and confirming that it's in the "to do" list, at least I know to manually check these until they are completed.

regards
Keith

Hi, I have two problems with my Companion Compare which I'd like to know whether are bugs or I'm doing something wrong I have three set-ups for my TRex 600 on my Companion and I wanted to confirm the differences that I'd made, my problems are: 1. The Heli tab seems to not be included in the results ...

Hi all, again apologies for slow response, however I've come a long way with my 2.1 telemetry since last update. I've been playing with both my DJI F550 and Yak54 with the following FRSky Telemetry modules: FrSky FLVSS Smart Port LiPo Voltage Sensor FrSky GPS V2 Sensor with S.Port FrSky Vario - High...

fixed it thanks OctavioS, un-installed and reinstalled, still did not ask if I wanted to download the firmware, so installed 2.1.7 on a spare machine, it asked me if I wanted the download, downloaded it, copied it to my main machine and that allowed me to upgrade the TX. No idea why it did not ask m...

Hi OctavioS, many thanks for the response, so obviously either this happened and companion cannot find the file, or the file did not download, is there any way for me to force the download again or go get the required file and download it to the relevant folder, do you know what the file will be cal...

Hi all, hopefully someone can answer this: I've just gone into Companion and been asked if I wanted to upgraded to Companion 2.1.7 from 2.1.6, accepted the upgrade which worked fine and expected it to auto update my TX on next connection, however it seems to think that my TX is up to date but if I l...

Hi all, apologies for dropping off the thread, been ill since my last posting and offline, however I've been reading and doing some tests and will post more info either tomorrow or early next week, it is a challenge but, it's understanding the order of how you do things. I'll try and include screen ...

Hi Kilrah, apologies for not having come back since last post, unfortunately been ill since then and am only just back online, I can confirm that sensor is sorted, thanks again for your assistance.

OK first lesson learnt, don't write a response assuming that you are logged in, you then have to log in and you've lost the response you typed. so here goes again So I now have altitude and distance again, however both seem to be not as accurate as they were before, and they take longer to update, d...

Thanks both, I'll try that out this morning but thought I had already, will let you know how it goes, Kilrah, is there any plan to include it down the line?

hi Richard, you are very much in the same position that I find myself in, I have come from 2.0.17 upgrading to 2.1.6 and I have gotten the FrSky FLVSS Smart Port LiPo Voltage Sensor working though and happy to send a screen shot of how I've set it up, for understanding I'm showing total battery volt...

Hi, apologies if this is the wrong location to ask however I'm new to forums, I have a couple of quesitons my setup after upgrade from 2.0.17 is: -Taranis Plus -OpenTX 2.1.6 -Companion 2.1.6 -FrSky FLVSS Smart Port LiPo Voltage Sensor -FRSky GPS V2 1. I have installed the 6 position S3 switch, and c...