openrcforums

Thanks Kilrah. I've added a Special Function to reset linked to arming the motor. In that way I do not have to remember the step.

I have a FrSky Vario NP sensor with Sport connection to XR8 with Taranis X9D running OpenTX 2.1.7 that does not zeroise. All sensors were auto discovered and Vario has Auto Offset checked which is my understanding for how to adjust for the atmospheric variations at the time. I've run telemetry loggi...

Also thanks Kilrah for your responses and apologies for my misunderstanding

Thanks for the clarification quadfather. I'll just not display on any telemetry screen. No point deleting as will come back if I rediscover sensors under 2.1 telemetry method.

That's exactly what it does. If you mean the X4 should only detect two outputs as per specs then why is my Tx detecting three? Or as your previous post three is the norm ie two plus a random value A2? As I stated my X8R only detects two as it should so why the detection difference when they are of ...

Hi Carbo
Thanks but I do not want to receive the battery voltage thus have no additional sport sensor. Therefore the Tx should only be able to discover the two Rx standard outputs.
Regards
Neil

Receivers that have an A2 connection will always send a value for it, if nothing is connected to it it will just be floating/random. So... what receiver? FrSky X4R conventional 4 channel Rx ie not the SBUS model. The specs only state RSSI and PWM voltage as outputs. I have a X8R and A2 is not detec...

Hi, Running opentx 2.1.6. Tx is discovering SWR, RSSI and RxBt sensors and unexpectantly an A2 sensor since it is a bare Rx. The Rx is only connected to the flight battery via ESC servo connector. The A2 is even displaying a value that curiously looks like a battery voltage and changes. But from my ...