openrcforums

FMS F-4 FHSS 2.4
3 of these E-FLITE MLP6DSM EFLRMLP6
SYMA 944842
Hobby Zone HBZ5310-HBZG2
Tx for my SYMA X5C
and a couple TX for JJRC H20C and a JJRC H20w


and the one I was hoping to use a lot is my Turnigy TGY 9X qith ERSKY9x 2.4

thanks for your reply

I have acquired 15 or so different tx from the family. Could someone tell me how to check output wave and do the tx' use crystals to produce proper frequency?

I was lucky to come on to this site and find people like you and Mike B, and others. This link ( http://openrcforums.com/forum/download/file.php?id=13565) of Mike B' : as he posted, shows roma and romb for tx and rx firmware files. I tried several different firmware upgrades with Mike' files entirel...

WOW! jhsa You are a prince. Thank you very much. I thought I followed mod to a tee. I am color blind but I know black and white. Why did the swap out work? I left and secured the disconnected white wire. Is it OK disconnected. Yours: "The white you can also leave unconnected." I have order...

Sorry half asleep when I posted that mess. DJT has firmware V2_host_romb_build-100826.frk received from MikeB. D8R-Xp has d8rxp_cppm27_build120926.frk received from FrSky.
Links: http://smartieparts.com/shop/index.php? ... page&id=21

Started at the above link and followed through.

Ok got DJT to bind with mismatched firmware on D8R-9X. (turned red off) I can set failsafe on the fly but for life of me I can not get Telemetry up on the the 9X screen. Any help would appreciated. Mods done on DJT and 9X. ersky9x R218 on board.

I do not see a reference to solid red in Led status in instructions in bind procedure. D8R-XP bind indicator light is on solid red after binding procedure. I can still control switches for camera and flashing lights installed on channels 5 and 6, but no receiver inputs in KK2 board. Prior to firmwar...

Upon inserting module I realized it would not fit. I opened the area surrounding pins in the djt module as per picture. Used verniers to make sure depth was correct . I put bare cartridge in bay to make sure it was bottoming out. Reassembled installed Had telemetry. And then firmware change to end w...

Unlisted now

My apologies a camera I am not but here goes.

https://www.youtube.com/watch?v=zZDgeCS ... e=youtu.be

https://www.youtube.com/watch?v=2t5sQcC ... e=youtu.be

I hope a small conclusion might be born out of these.

and as usual Thank you

Patience Please never done this before.

jhsa

Someone was right about not changing anything in my system YET, so rather than opening my radio up, I have made a couple of video' of my system in operation. Utube, if I can, will that do? I will open it up and capture guts if you want.

When I started all this, I had what I considered telemetry. A1 on my Tx with DJT in play, said approximately 3.9 Rx below it said approximately 95 - 100 depending. I now get nothing on the screen using DJT. other than 00.0 Now on my DHT I get these above numbers. The unit flies no problem with eithe...

Scan_20160324_170335.jpg I hope this works. .jpg shows here. I am reading your posts. MikeB: I will take on your suggestion, and forgetting about the remote failsafe for the moment and reverting the DJT to 'standard' firmware, and try for telemetry first from the DJT. jhsa I will not remove anythin...

OK Mikeb I installed the firmware you posted got uid on DJT. I have tried installing the firmware I got from you and 2 others acquired from FrSky on the D8R-9X. Best I can get is a reset of failsafe on the fly. OK jhsa Would you like me to take the Smartie parts board out of 9X? Or just disconnect t...

Ok I guess I have taken up too much time on the site for My project. I will purchase another 9X TX, another Smartie parts 9Xtreme board, and a DJT module. I will NOT re flash anything, as It is my belief that by re flashing I upset the apple cart by doing so. Thank you all for your time and patience...

It is going to take a LONGGGGG while before I can START to grasp what is going on here. I have a Turnigy 9X radio with the Smartie parts 9Xtreme board installed With backlight. I installed the DHT inside as per different videos viewed. I installed the 1w, 2w, fw switch outside the TX body, I shorten...

Sorry and both switches are and were down.

I appreciate that thought, but, this system was functional Receiving A1 and RSSi before the re flash to try for the function of getting failsafe on the fly. As I said earlier post failsafe function is working now. Ok, I am not getting telemetry at all with the DJT, not just the A1. I removed the gut...

And again I have to thank you jhsa, for your input and patience with a newbie.

Yes I have A1 and RSSI with DHT internal module using same receiver D8R-XP. I have no A1 or RSSI being pick up by TX using DJT, although I am flying with DJT .

Got failsafe on the fly but still no telemetry. Could it be something was turned off in ??

Thank you all

Thank you MikeB, will install at earliest convenience. Decent weather here so trying to get some gardening in today.

Again much appreciated, thank you

Thank you jhsa for your persistence, and MikeB for chiming in on my problem. Very much appreciated. MikeB sent you a personal.

Openrcforums.com goes to the top of list for being the fastest and most responsive to problem solving. Thank you all.

Kilrah

Normal? Could you enlighten me. I can live without Failsafe on the fly but It would be nice to telemetry back on board.

HOW and where???

thank you

I do not nknow if I swore earlier or not but here it is:
http://www.frsky-rc.com/download/view.p ... HT/DJT/DFT

Wow, now I am really befuddled. Thank you for input.

LOL

I have tried several other forums, with no answers. To come here and get suggestions about my problem is certainly;y a breath of fresh air.

I await your suggestions with baited breath.

thank you again

Thank you Kilrah, the setup has isolation switches on the feed wires to the DHT.

Thank you jhsa, I did use the rom b version. It is still available, and hence my dilemma.

First off thank you for answering. Updated FrSKY DJT module installed in my Turnegy 9X with Smartie parts installed. Used frsky_update_rev11.exe to install fdd_tx_rev2_build10314.frk Followed instructions and got UID number, downloaded and ended on both. I used same *.exe with d8rxp_cppm27_build1209...

I lost A1 (bat) transmission from FrSky DJT module after reflashing with 27ms software. When I switch back to DHT I get telemetry transmission back to TX. Am I doing something wrong or is module butched? I have tried reflashing but still can not get A1 transmission back to TX.