openrcforums

Ok, I'll give it a run. Thanks for the reply!

Looks like you are using a stereo cable, or even one that carries power as well (4 connections). I've never tested such a cable, I've only ever used a mono cable (2 connections). You have a Tx that has a plastic "shroud" around the module pins. This stops the DJT module from fitting prope...

Looks like you are using a stereo cable, or even one that carries power as well (4 connections). I've never tested such a cable, I've only ever used a mono cable (2 connections). You have a Tx that has a plastic "shroud" around the module pins. This stops the DJT module from fitting prope...

Disregard previous entry, faulty USB cable. I was able to flash the latest firmware and download the voice files. I can get to the trainer menu and source is set to Jack. I tried checking ppm output. Values do not change. Any thoughts? this is what you asked me to try? Right

The firmware on the original 9X will have been changed to firmware to support the 9Xtreme. You will need to re-flash the original 9X to er9x to be able to use it. Best to update the firmware on the 9Xtreme. Go here: http://openrcforums.com/forum/viewtopic.php?f=126&t=7751#p103194 and download &...

MikeB wrote:Are you using the firmware as it shipped, or have you updated it?

Mike.

As shipped, I received it about two weeks ago.
Robert

Do you have a buddy box cable (Mono jack plug to jack plug)? If so you may test the PPM output. 1. Remove the Tx module. 2. Power the Tx on. 3. Go to the trainer menu and check the trainer source is set to "Jack". 4. Plug the buddy lead into the jack socket on the back of the radio. 5. No...

jhsa wrote:In the Protocol menu check that you didn't set PPM to the internal module instead of the external.. That happened to me..

João

Thanks for getting back to me. I double checked,it is set to external Nothing!

Hello all, new to the forum. I'm using a turnigy 9x with 9extreme, frsky DJT module, D4R-ll and V8FR-ll receivers using PPM. Calibrated the sticks. Everything works Great as far as the radio is concerned. Menus, setting up mixes and switches no problem. My problem is the receivers do not seem to be ...